Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지

Variation of the Group Velocity of Lamb Wave $S_o$ Mode with the Propagating Direction in the Laminated Unidirectional CFRP Plates

단일방향 탄소섬유복합재료 적층 판에서 전파 방향에 따른 램파 $S_o$ 모드의 군속도의 변화

  • 김영환 (성균관대학교 기계공학부) ;
  • 이승석 (한국표준과학연구원 환경안전계측센터 스마트계측그룹) ;
  • 김호철 (한국과학기술원 물리학과) ;
  • 이정기 (한국표준과학연구원 환경안전계측센터 스마트계측그룹)
  • Published : 2005.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the group velocity dispersion curves of the $S_o$ symmetric mode in unidirectional CFRP plate was calculated as varying the propagating direction. The group velocity curve was obtained with the group velocities of the $S_o$ symmetric mode corresponding to 0.2 MHz-mm under the first cut-off frequency in the dispersion curves, and corrected by introducing the slowness curve. The velocities of the $S_o$ symmetric mode in the unidirectional CFRP plate were measured as varying the propagating direction and compared with the col?rotted group velocity curve. The measured velocities were good agreement with the corrected group velocity curve except near the fiber direction which was called the cusp region. It implies that the direction of the group velocities incline toward the fiber direction of the unidirectional CFRP plates when the propagation direction is not accorded with the principal axis. It is supposed that this phenomenon rerults from the preferential propagating the energy toward the direction with the faster propagation velocity.

본 연구에서는 단일방향 탄소섬유강화복합재료 판에서 $S_o$ 대칭모드의 군속도 분선곡선을 전파 방향을 변화시키먼서 계산하였다. 그리고 속노 분산 곡선에서 첫 번째 단절주파수 이하인 0.2 MHz-mm에 해당하는 $S_o$ 대칭모드 군속도를 가지고서 위상속도 곡선을 얻고 slowness 곡선을 도입하여 군속도 곡선으로 교정하였다. 단일방향 섬유강화복합재료 판에서 $S_o$ 대칭모드의 속도를 전파 방향을 변화시키면서 측정하였고 교정된 군속도 곡선과 비교하였다. 측정된 속도는 섬유 방향 근처의 cusp 영역을 제외하고는 교정된 군속도 곡선과 잘 일치하였다. 이것은 단일방향 탄소섬유강화복합재료 판에서 속도가 빠른 방향으로 에너지를 더 잘 전파하기 때문에 전파 방향이 주축방향과 일치하지 않을 때 군속도 방향은 섬유 방향 쪽으로 기울어지는 결과로 나타난 것이다.

Keywords

References

  1. Zimmer J. E. and Cost J. R., 'Determination of the Elastic Constants of a Unidirectional Fiber Composite Using Ultrasonic Velocity Measurements,' J. Acost. Soc. Am., Vol. 47, No. 3, 1970, pp. 795-803 https://doi.org/10.1121/1.1911962
  2. Kim H. C. and Park J. M., 'Ultrasonic wave propagation in Carbon fibre reinforced plastics,' J. Material Science, Vol. 22, 1988, pp. 4536-4540 https://doi.org/10.1007/BF01132059
  3. Kline R. A., 'Wave Propagation in Fibre Reinforced Composites for Oblique Incidence,' J. Composite Materials, Vol. 22, 1988, pp. 287-303 https://doi.org/10.1177/002199838802200306
  4. Wu T.-T. and Ho Z.-H., 'Anisotropic Wave Propagation and its Application to NDE of Composite Materilas,' Experimental Mechanic, Dec. 1990, pp. 313-318
  5. Rokhlin S. I. and Wang W., 'Double through transmission bulk wave method for ultrasonic phase velocity measurement and determination of elastic constants of composite materials,' J. Acost. Soc. Am., Vol. 91, No. 6. 1992, pp. 3303-3312 https://doi.org/10.1121/1.402847
  6. Sachse W., Veidt M. and Niu L., 'Determination of the elastic properties of composite materials using simulated AE signals,' Acoustic Emission in Composite Materials, Vol. 4, 1992, pp. 401-410
  7. Lamb H., 'On waves in an elastic plate,' Proc. of the Royal Soc. London, Series A, Vol. 93, No. 648, 1917, pp. 114-128 https://doi.org/10.1098/rspa.1917.0008
  8. Weaver R. L. and Pao Y. H., 'Axisymmetric Elastic Waves Excited by Point Source in a Plate,' J. Applied Mechanics, Vol. 49, 1982, pp. 821-836 https://doi.org/10.1115/1.3162623
  9. Weaver R. L. and Pao Y. H., 'Spectra of transient waves in elastic plates,' J. Acost. Soc. Am., Vol. 72, No. 6, 1982, pp. 1933-1941 https://doi.org/10.1121/1.388623
  10. 이정기, 김호철, 최명선, 김영환, '유리판과 단일방향 탄소섬유강화 플라스틱판에서 점원에 의해 발생된 과도적 탄성파의 주파수 해석,' 한국음향학회, 13권, 제6호, pp. 50-59, 1994
  11. Solie L. P. and Auld B. A., 'Elastic waves in free anisotropic plate,' J. Acost. Soc. Am., Vol. 54, 1973, pp. 50-65 https://doi.org/10.1121/1.1913575
  12. Chimenti D. E. and Nayfeh A. H., 'Leaky Lamb waves in fibrous composite laminates,' J. Applied Physics, Vol. 58, No. 12, 1985, pp. 4531-4538 https://doi.org/10.1063/1.336268
  13. Kline R. A., 'Doroudian M. M. and Hsiao C.P., Plate wave propagation in transversely isotropic materials,' J. Composite Materials, Vol. 23, 1989, pp. 505-533 https://doi.org/10.1177/002199838902300505
  14. Noiret D. and Rojet J., 'Calculation of wave propagation in composite materials using the Lamb wave concept,' J. Composite Materials, Vol. 23, 1989 pp. 195-206
  15. Gorman M. R., 'Plate wave acoustic emission; Composite Materials, Acoustic Emission in Composite Materials,' Vol. 4, 1992, pp. 395-400
  16. Dayal V. and Kinra V. K., 'Leaky Lamb waves in an anisotropic plate. I: An exact solution and experiments,' J. Acost. Soc. Am., Vol. 85, No. 6, 1989, pp. 2268-2276 https://doi.org/10.1121/1.397772
  17. Rose W. R., Rokhlin S. I. and Adler L., 'Evaluation of anisotropic properties of Graphite-Epoxy composites using Lamb waves,' Rev. Prog. QNDE, Vol. 6B, 1987, pp. 1111-1118
  18. A. G. Every and W. Sachse, 'Determination of the elastic constants of anisotropic solids from acoustic wave group velocity measurements,' Physics Review B, Vol. 42, No. 13, 1990, pp. 8196-8205 https://doi.org/10.1103/PhysRevB.42.8196
  19. Pollard H. F., 'Sound waves in Solids,' Chap. 4, 1977