• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.427-428
• /
• 2008

We have studied design and application about an self generation equipment for underground power transmission cable. The split CT(Current Transformer), which has the applicable underground power transmission cable, was manufactured through electromagnetic simulation of magnetic core. And manufactured the AC-DC converter that supplied stable DC power for PLC modem when current of power line has more than 150A. An self generation equipment using the CT and AC-DC converter get into operation the PLC modem consistently. As a result, the underground power transmission cable was showed the application possibility through the stable communication and network characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1841-1843
• /
• 1996

To meet recent increasing demand for electric power in large cities in Korea, and to improve reliability of the power supply. Especially, demand for electric power apparatus places great emphasis on not only function but also environmental factors. In this paper, environpolitics describes according to large capacity demand for extra high voltage underground transmission lines and high reliability of the power supply.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.462-464
• /
• 2005

This paper analyses the transient phenomena against single line to ground fault and lightning surge between Korea and Japan on underground power cable systems. For analysis, find proper earthing resistance of neutral grounding system adopted in Japan. This paper is expected to contribute the establishment of proper protection methods against transients on underground power cable systems.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.397-402
• /
• 2001

Due to the recent economic growth and the subsequent increase in demand of electricity, the construction of underground transmission line is also on the rise. Especially, in the metropolitan area, we have much obstruction in laying the line to the central district because of difficulties in procurement of construction land and the increase in the construction cost. Therefore, the necessity of increasing the capacity of transmission line has been suggested. In order to increase the capacity, the electric voltage and current intensity in size-limited lines should be also increased. But, eventually, it leads to the generation of unnecessary heat and the heat radiates through insulation cables and backfill concrete. So we need to develop the material that has good heat radiation characteristics. In this study, we developed and tested backfill concrete that can be a substitute for previously used backfill sand.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.491-493
• /
• 2001

This paper describes the effect of lightning current on combination transmission line. In the paper, an lightning current which can generate 2/80[${\mu}s$]. 20[kA] - 40[kA] waveform is modeled in ATPDraw. The lightning current invaded to the overhead power transmission line propagates to the underground power cable. The simulation was performed to analyze the effect of arrester location and overvoltage occurred in power cable.

• 한국건설순환자원학회논문집
• /
• 제5권3호
• /
• pp.84-93
• /
• 2010

지중전력선과 같은 원형 지하매설관의 경우 관의 하단부 다짐효율이 낮아 파손등과 같은 구조적 문제점에 항상 노출되어 있다. 이러한 문제점들 때문에 다양한 방법들이 강구되어 왔으며 그중 하나가 유동성이 뛰어난 저강도 콘크리트의 개발이다. 외국에서는 이미 오래전부터 연구개발을 진행하여 전력회사를 중심으로 이미 실용화 단계에와 있다. 하지만, 국내에서는 일반구조물에 대한 연구는 진행되었으나, 야간시간대 급속시공이 필요한 지중전력선 공사에 적용되는 급결 유동성 뒤채움재에 대한 연구는 최근에 이루어지기 시작했다. 본 논문에서는 고유동성을 지니고 급속 고화가 가능한 현장 굴착토를 활용한 유동성 뒤채움재에 대한 역학적 특성 및 3차례에 걸쳐서 실내모형 및 실물실험을 수행한 결과, 유동성은 교반시작 이후 약 9~15분내 타설 한계 유동성(160 mm)에 도달하는 것으로 확인되었고, 재료의 부력은 타설 초기에 급격히 발생하고 이후 점차 소산하는 것으로 확인되었으며, 그 값은 재료의 단위중량으로 계산한 이론부력의 약 70 %로 계측되었다. 본 연구에서 실험을 통해서 도출한 시공방법(배치플랜트를 이용한 타설, 스페이서 설치간격 1.8 m 및 타설 간격 2 m)을 적용시 시공품질, 작업성 및 구조적 안정성을 확보 할 수 있었다.

• 조명전기설비학회논문지
• /
• 제28권6호
• /
• pp.60-67
• /
• 2014

Power system fault analysis is commonly based on well-known symmetrical component method, which describes power system elements by positive, negative and zero sequence impedance. The majority of fault in transmission lines is unbalanced fault, such as line-to-ground faults, so that both positive and zero sequence impedance is required for fault analysis. When unbalanced fault occurs, zero sequence current flows through earth and ground wires in overhead transmission systems and through cable sheaths and earth in underground transmission systems. Since zero sequence current distribution between cable sheath and earth is dependent on both sheath bondings and grounding configurations, care must be taken to calculate zero sequence impedance of underground cable transmission lines. In this paper, EMTP-based sequence impedance calculation method was described and applied to 345kV cable transmission systems. Calculation results showed that detailed circuit analysis is desirable to avoid possible errors of sequence impedance calculation resulted from various configuration of cable sheath bonding and grounding in underground cable transmission systems.

• 대한건축학회논문집:계획계
• /
• 제34권4호
• /
• pp.69-76
• /
• 2018

The purpose of this study is to propose and verify a spatial network construction method that integrated roads and subway lines to improve the predictability of the urban spatial analysis model. The existing axial map for urban spatial analysis did not reflect the subway line that serves as an important moving space in modern cities. To improve this axial map, proposed a Ground-Underground Spatial Network by integrating the underground spatial network with the axial map. As a result of the integration analysis, the Ground-Underground Spatial Network(GUSN) were similar to the movement frequency. Correlation of GUSN was 0.723, which showed higher explanatory power than correlation coefficient of 0.575 in axial map. The result of this study is expected to be a theoretical basis for constructing spatial network in urban space analysis with subway.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.380-382
• /
• 2001

This paper describes the protection of insulation joint box in combined transmission line which is connected with the 154kV underground power cables. An actual power cable system was selected to establish modeling and to analyze. Modeling was established in EMTP and ATPDraw. Simulation was carried out according to the buried method of cable and connection method of CCPU. Results presented in this paper will be applied to another power cable systems.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권2호
• /
• pp.74-79
• /
• 2002

We have been analyzed the interference problems already in steady state, especially AC corrosion when the gas pipeline is burred with power cable in the same submarine tunnel. In the next stage, we analyze the induced voltage in a fault condition of 154[kV] underground T/L. This paper presents the results of them which are limitation of safety voltage. meodeling of power cables, gas pipeline and grounding systems, analysis of induced voltage in a fault condition, and protection of Power line system.