• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.451-457
• /
• 2000

In many dynamic problems such as foundation vibrations ultrasonic nondestructive evaluation and blasting analysts are confronted with the problem of wave propagation in an infinite or semi-infinite media. In order to simulate this situation by a finite analytical model provisions must be made to absorb the stress waves arriving at the boundary. Absorbing boundaries are mathematical artifacts used to prevent wave reflections at the boundaries of discrete models for infinite media under dynamic loads. An analytical study is carried out to examine the effectiveness of Lysmer-Kuhlemeyer model one of the most widely used absorbing boundaries. Validity of the absorbing boundary conditions suggested by Lymer-Kuhlemeyer is examined by adopting the solution of Ewing et al. to the problem of plane waves from a harmonic normal force on the surface of an elastic half-space. The Ewing's problem is than numerically simulated using the finite element method on a semi-circular mesh with and without absorbing boundaries which are represented by viscous dashpots. The absorption ratios are calculated by comparing the displacements at the absorbing boundaries to those at the free field without absorbing boudaries.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.601-604
• /
• 2002

In this paper bolt-tightened Langevin type vibrator was designed using longitudinal-torsional vibration. These two vibrations make rotary displacement at the end of the vibrator. ANSYS was used to determine shape and dimension of the vibrator in addition to resonant frequency, displacement and stress distribution. This kind of vibrator can be applied for a brakeless and gearless rotary motor which has high torque at low speed.

• The Journal of the Acoustical Society of Korea
• /
• 제25권3E호
• /
• pp.110-114
• /
• 2006

In a previous theoretical paper, we have derived a unified formula by considering 2-D coupled mode vibrations. The unified formula for electromechanical coupling coefficient of piezoelectric resonator was verified experimentally. The capacitance change near the resonant frequency was investigated to estimate the effective coupling coefficient of the resonator instead of the conventional method based on I-D model. The susceptance spectra were measured for the seven samples of piezoelectric resonator with different aspect ratio. Excellent agreement between theoretical and experimental results was obtained.

• 대한의용생체공학회:의공학회지
• /
• 제24권3호
• /
• pp.141-149
• /
• 2003

본 논문에서는 초음파 의용 영상시스템의 B-모드 영상으로 잘 관찰되지 않는 암이나 종양을 진단하기 위하여 인체 연조직의 탄성계수를 측정하여 영상화하는 방법을 제안하였다. 연조직의 단단함을 측정하기 위하여 조직에 정현파 진동을 인가하고 연조직의 기계적인 진동의 크기를 초음파 영상의 스페클 밝기의 시간적 변화를 추정하여 구하였다. 제안한 방법은 B-모드 영상에서 비교적 적은 계산량으로 쉽게 조직의 단단함을 추정할 수 있음을 시뮬레이션과 실험으로 검증하였다

• 한국정밀공학회지
• /
• 제27권6호
• /
• pp.47-54
• /
• 2010

In this paper, the purpose is to study a method for detection of crack in clamped-clamped beams using the vibration characteristics. The natural frequency of beam is obtained by FEM and experiment. The governing differential equations of a Timoshenko beam are derived via Hamilton's principle. The two coupled governing differential equations are reduced to one fourth order ordinary differential equation in terms of the flexural displacement. The crack is assumed to be in the first mode of fracture and to be always opened during the vibrations. The differences between the actual and predicted crack positions and sizes are less than 9.8% and 28%, respectively.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권2호
• /
• pp.44-48
• /
• 2007

In recent years, the size of plane substrates and semiconductor wafers has increased. As conventional contact transportation systems composed of, for example, carrier rollers, belt conveyers, and robot hands carry these longer and wider substrates, the increased weight results in increased potential for fracture. A noncontact transportation system is required to solve this problem. We propose a new noncontact transportation system combining acoustic viscous and aerostatic forces to provide damage-free transport. In this system, substrates are supported by aerostatic force and transported by acoustic viscous streaming induced by traveling wave deformation of a disk-type stator. A ring-type piezoelectric transducer bonded on the stator excites vibration. A stator with a high Q piezoelectric transducer can generate traveling vibrations with amplitude of $3.2{\mu}m$. Prior to constructing a carrying road for substrates, we clarified the basic properties of this technique and stator vibration characteristics experimentally. We constructed the experimental equipment using a rotational disk with a 95-mm diameter. Electric power was 70 W at an input voltage of 200 Vpp. A rotational torque of $8.5\times10^{-5}Nm$ was obtained when clearance between the stator and disk was $120{\mu}m$. Finally, we constructed a noncontact transport apparatus for polycrystalline silicon wafers $(150(W)\times150(L)\times0.3(t))$, producing a carrying speed of 59.2 mm/s at a clearance of 0.3 mm between the stator and wafer. The carrying force when four stators acted on the wafer was $2\times10^{-3}N$. Thus, the new noncontact transportation system was demonstrated to be effective.

• 한국소음진동공학회논문집
• /
• 제19권9호
• /
• pp.935-942
• /
• 2009

In this paper, the purpose is to investigate the natural frequency of a cracked Timoshenko cantilever beams by FEM(finite element method) and experiment. In addition, a method for detection of crack in a cantilever beams is presented based on natural frequency measurements. The governing differential equations of a Timoshenko beam are derived via Hamilton's principle. The two coupled governing differential equations are reduced to one fourth order ordinary differential equation in terms of the flexural displacement. The crack is assumed to be in the first mode of fracture and to be always opened during the vibrations. The detection method of a crack location in a beam based on the frequency measurements is extended here to Timoshenko beams, taking the effects of both the shear deformation and the rotational inertia into account. The differences between the actual and predicted crack positions and sizes are less than 6 % and 23 % respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.49-49
• /
• 2010

Nanopiezotronics is an emerging area of nanotechnology with a variety of applications that include piezoelectric field-effect transistors and diodes, self-powered nanogenerators and biosystems, and wireless nano/biosensors. By exploiting coupled piezoelectric and semiconducting characteristics, it is possible for nanowires, nanobelts, or nanorods to generate rectifying current and potential under external mechanical energies such as body movement (handling, winding, pushing, and bending) and muscle stretching, vibrations (acoustic and ultrasonic waves), and hydraulic forces (body fluid and blood flow). Fully transparent, flexible (TF) nanogenerators that are operated by external mechanical forces will be presented. By controlling the density of the seed layer for ZnO nanorod growth, transparent ZnO nanorod arrays were grown on ITO/PES films, and a TF conductive electrode was stacked on the ZnO nanorods. The resulting integrated TF nanodevice (having transparency exceeding 70 %) generated a noticeable current when it was pushed by application of an external load. The output current density was clearly dependent on the force applied. Furthermore, the output current density depended strongly on the morphology and the work function of the top electrode. ZnO nanorod-based nanogenerators with a PdAu, ITO, CNT, and graphene top electrodes gave output current densities of approximately $1-10\;uA/cm^2$ at a load of 0.9 kgf. Our results suggest that our TF nanogenerators are suitable for self-powered TF device applications such as flexible self-powered touch sensors, wearable artificial skins, fully rollable display mobile devices, and battery supplements for wearable cellular phones.

• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.1-7
• /
• 2017

분무식 노즐(spray nozzle)은 액체의 표면을 증가시키기 위해 에너지를 공급하여 액체를 다수의 액적으로 미립화시키는 장치로 연소과정에서의 연료의 미립화 또는 표면이나 입자의 코팅 등 여러 산업분야에 다양한 목적으로 응용된다. 초음파 미립화 노즐은 진동 발생장치로부터 고진동수의 전기에너지를 받아 같은 진동수의 기계적 에너지로 변환시키는 변환기를 갖고 있다. 변환된 에너지를 액체에 부가하여 고주파 진동에 의해 미세한 액적을 생성하여 분사한다. 코팅작업에서 가압되지 않은 저속의 분무는 액적이 튕겨나가지 않고 표면에 달라붙어 과도하게 분사되는 양을 줄일 수 있다. 초음파 미립화 노즐은 초음파 진동부 외벽에 공기를 공급해 줄 수 있는 공간을 통해 생성된 보조 공기흐름을 이용하여 저속의 액적을 운반하여 분무특성이나 분무형상을 조절할 수 있다. 따라서 주위 공기의 흐름을 이용하여 원하는 분무특성을 얻을 수 있다. 본 연구에서는 액적의 분사 운동을 모사하기 위해 라그랑지안 분산상 모델(DPM)을 적용한 상용코드 FLUENT를 사용하여 액적 주위의 공기흐름을 동반하는 초음파 미립화 노즐을 해석하였다. 노즐 수축부 형상, 액적의 크기 그리고 공기 측 압력차의 크기를 변화시키며 수치해석을 수행하여 코팅용 분무를 위한 최적 조건을 연구하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.407-409
• /
• 2017

기존에 많은 마트들이 카트를 관리하는데 있어서 분실과 사고로 인한 손해가 발생하고 있다. 그래서 카트들을 효율적으로 관리하기 위해서 기존 카트에 여러 기능을 가지는 라즈베리파이를 설치하여 이러한 문제점을 해결하고자 한다. 우선적으로 초음파 센서를 사용하여 카트와 물체간의 거리를 측정, 측정된 거리에 따라 진동 센서를 이용, 진동 수에 변화를 줘서 사용자에게 주의를 주도록하고 실내위치확인시스템(Indoor Positioning System, IPS)을 응용한 Beacon을 사용하여 실시간으로 카트의 위치를 전송 받고 또한 소비자들의 소비 패턴(이동 경로)을 파악하여 카트의 관리와 마트의 수익 창출에 이바지하게 된다. 분실에 관한 문제 또한 일정 거리가 벗어나게 되면(마트 밖, 분실우려가 있는 곳) 경고음을 발생시켜 이러한 문제를 해결한다.