• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1523-1528
• /
• 2014

Silicon quantum dots (Si QDs) were synthesized by etching silicon nanopowder with aqueous hydrofluoric acid (HF) and nitric acid ($HNO_3$). Then, the hydride-terminated Si QDs (H-Si QDs) were functionalized by 1- octadecene (ODE). By only controlling the etching time, the maximum luminescence peak of octadecylterminated Si QDs (ODE-Si QDs) was tuned from 404 nm to 507 nm. The average optical gap was increased from 2.60 eV (ODE-Si QDs-5 min) for 5 min of etching to 3.20 eV (ODE-Si QDs-15 min) for 15 min of etching, and to 3.40 eV (ODE-Si QDs-30 min) for 30 min of etching. The electron affinities (EA), ionization potentials (IP), and quasi-particle gap (${\varepsilon}^{qp}_{gap}$) of the Si QDs were determined by cyclic voltammetry (CV). The quasi-particle gaps obtained from the CV were in good agreement with the average optical gap values from UV-vis absorption. In the case of the ODE-Si QDs-30 min sample, the difference between the quasi-particle gap and the average optical gap gives the electron-hole Coulombic interaction energy. The additional electronic levels of the ODE-Si QDs-30 min and ODE-Si QDs-15 min samples determined by the CV results are interpreted to have originated from the Si=O bond terminating Si QD.

• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.1990-1994
• /
• 2013

A novel multi-cationic borane, tri-N-methylpyridinium substituted triarylborane, $[BAr^N_3]I_3$ ($[2]I_3$) ($Ar^N=4-(4-C_5H_4N-Me)-2,6-Me_2-C_6H_2$) was prepared from the corresponding neutral tris-pyridyl borane, $BAr_3$ (2a) ($Ar=4-(4-C_5H_4N)-2,6-Me_2-C_6H_2$). The crystal structure of 2a determined by X-ray diffraction study reveals the presence of tri-coordinate boron center with peripheral pyridyl moieties. The fluoride ion affinity of the cationic borane, $[2]I_3$ was investigated by UV-vis absorption titrations and was compared with that of neutral 2a. While 2a binds fluoride with the binding constant of $1.9{\times}10^2\;M^{-1}$ in $THF/H_2O$ (9:1 v/v) mixture, $[2]I_3$ shows a very high binding constant ($K=1.0{\times}10^8\;M^{-1}$) that is greater by six orders of magnitude than that of 2a in the same medium. This result indicates that the fluorophilicity of triarylborane can be drastically enhanced by multiple pyridinium substitutions.

• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1779-1782
• /
• 2013

N-type ZnO nanorods were grown on p-type porous silicon using a chemical bath deposition (CBD) method (p-n diode). The structure and geometry of the device were examined by field-emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) while the optoelectronic properties were investigated by UV/Vis absorption spectrometry as well as photoluminescence and electroluminescence measurements. The field emission (FE) properties of the device were also measured and its turn-on field and current at 6 $V/{\mu}m$ were determined. In principle, the growth of ZnO nanorods on porous siicon for optoelectronic applications is possible.

• 대한화학회지
• /
• 제61권4호
• /
• pp.185-190
• /
• 2017

One-dimensional CdTe nanorods (NRs) are obtained by the reaction of various Cd precursors with single crystalline Te nanorod templates, which are pre-synthesized from Te precursors by a simple and reproducible solvothermal method. Throughout the process, the diffraction intensity of different crystal facets of single crystalline Te NRs varied with reaction times. Finally, by alloying Cd ions along the axial direction of Te NRs, polycrystalline cubic phase CdTe NRs with diameters of 80-150 nm and length up to $1.2-2.4{\mu}m$ are obtained. The nucleation and growth processes of Te and CdTe NRs are discussed in details, and their properties are characterized by XRD, SEM, TEM, Raman scattering, and UV-vis absorption spectra. It was found that the key elements of synthesizing CdTe NRs such as reaction temperatures and Cd sources will strongly influence the final shape of CdTe NRs.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.334.2-334.2
• /
• 2016

Silicon nitride (SiNx:H) films are generally used as passivation layer on solar cell and they are usually made by plasma enhanced chemical vapor deposition (PECVD). In this study, we investigated the properties of silicon nitride (SiNx:H) films made by PECVD. Effects of mixture ratio of process gases with silane (SiH4) and ammonia (NH3) on the passivation qualities of silicon nitride film are evaluated. Passivation properties of SiNx:H are focused by making antireflection properties identical with thickness and refractive index controlled. The absorption coefficient of each film was evaluated by spectrometric ellipsometery and the minority carrier lifetimes were evaluated by quasi-steady-state photo-conductance (QSSPC) measurement. The optical properties were obtained by UV-visible spectrophotometer. The interface properties were measured by capacitance-voltage (C-V) measurement and the film components were identified by Fourier transform infrared spectroscopy (FT-IR) and Rutherford backscattering spectroscopy detection (RBS) - elastic recoil detection (ERD).

• International Journal of Industrial Entomology and Biomaterials
• /
• 제33권2호
• /
• pp.96-102
• /
• 2016

Recently silk polymer produced by Bombyx mori silkworm has been considered as biological macromolecules. Silk polymer was extracted in PBS solution at $37^{\circ}C$ for 72 h or $72^{\circ}C$ for 24 h. The effect of EtOH treatment on the cocoon extraction was also examined. The extraction yield of cocoon was less than 1 wt% regardless of extraction conditions. UV spectroscopy showed that the experimental extracts have absorption bands at 280 nm. There is no cytotoxicity effect on the mouse fibroblast L929 cell. The phenotype of L929 cell was not changed under the experimental conditions. The proliferation behavior of L929 cell was not affected by the addition of cocoon extract. Therefore, cocoon extract might be cytocompatible and can be used as promising biomaterials.

• Bulletin of the Korean Chemical Society
• /
• 제25권7호
• /
• pp.983-985
• /
• 2004

PMMA-coated CdS nanorod was prepared by encapsulation of CdS nanorod through the polymerization process of PMMA on the surface of CdS nanorod. PMMA organic nanotube was then obtained from the elimination of the CdS nanorod by the photocorrosion. For the photocorrosion reaction of the CdS nanorod, monochromatic light was irradiated to the oxygen-saturated aqueous methyl viologen solution with PMMAcoated CdS nanorod. Photocorrosion reactions of PMMA-coated CdS nanorod were investigated and characterized by utilizing UV-Vis absorption, X-ray diffraction (XRD) and scanning electron microscopic (SEM) and transmission electron microscopic (TEM) images.

• 한국세라믹학회지
• /
• 제44권3호
• /
• pp.137-141
• /
• 2007

$La_{2}O_{3}-TiO_{2}-SiO_{2}$ glass, a type that could not obtained so far by the conventional melting method, was prepared successfully using a sol gel process. Glass derived with the sol-gel process has compositions of $5La_{2}O_{3}-5TiO_{2}-90SiO_{2},\;5La_{2}O_{3}-10TiO_{2}-85SiO_{2}$, and $5La_{2}O_{3}-20TiO_{2}75SiO_{2}$. The UV-visible absorption edge of all glass compositions was below 400 nm. The measured density is in the range of 2.55-2.89, and was nearly identical to the calculated density and the refractive index of the glasses derived from the sol-gel ranges from 1.545 to 1.645. The molar additive coefficient of $TiO_{2}$ measured in this ternary system is lower than the calculated value, while the value of $La_{2}O_{3}$ is higher.

• Bulletin of the Korean Chemical Society
• /
• 제23권2호
• /
• pp.184-188
• /
• 2002

Unsaturated $Cr(CO)_x(1{\leq}x{\leq}5)$molecules were generated in the gas phase from photolysis of $Cr(CO)_6$vapor in He using an unfocussed weak UV laser pulse and their reactions with $O_2$ and $N_2O$ have been studied. The formation and disappearance of the ground state CrO molecules were identified by monitoring laser-induced fluorescence(LIF) intensities vs delay time between the photolysis and probe pulses. The photolysis laser power dependence as well as the delay time dependence of LIF intensities from the CrO orange system showed different behavior as those from ground state Cr atoms, suggesting that the ground state CrO molecules were generated from the reaction between $O_2/N_2O$ and photo-fragments of $Cr(CO)_6$ by one photon absorption. The depletion rate constants for the ground state CrO by $O_2$ and $N_2O$ are $5.4{\pm}0.2{\times}10^{-11}$ and $6.5{\pm}0.4{\times}10^{-12}cm^3molecule^{-1}s^{-1}$, respectively.

• 분석과학
• /
• 제11권2호
• /
• pp.96-104
• /
• 1998

수 많은 광검출기들이 직선으로 집적된 광다이오드 어레이를 이용한 모세관 전기영동장치용 다채널 검출기를 개발하였다. 본 연구에서 사용된 광다이오드 어레이는 1024개의 광검출소자를 가지고 있으며 275~675 nm 파장범위에서 시료의 흡수분광스펙트럼을 검출할 수 있다. 이 장치는 30 ms내에 전 파장영역의 스펙트럼을 얻을 수 있으며, PC에 의하여 시료분석에 필요한 여러 가지 조건들을 제어할 수 있도록 설계하였다. 개발된 검출기의 성능을 L-ascorbic acid와 alizarin yellow GG를 사용하여 시험하였다. 본 연구에서 개발한 모세관 전기영동장치용 다채널 검출기의 재현성 실험결과 상대 표준편차는 5.6%이었다.