• 한국건설순환자원학회논문집
• /
• 제5권2호
• /
• pp.130-136
• /
• 2017

본 연구에서는 UV 폭로 및 동결융해 환경이 FRP Hybrid Bar의 인장거동 및 표면 열화에 미치는 영향을 평가하기 위해 FRP Hybrid Bar를 대상으로 UV 폭로 및 동결융해 시험을 실시하였다. FRP Hybrid Bar의 경우 UV 폭로 및 동결융해 180cycle 시험 전/후 외관적인 열화가 거의 발생하지 않았다. 또한 FRP Hybrid Bar의 주요 장점 중 하나인 인장경화특성은 동결융해 시험을 거친 이후에도 유지되었는데, 이는 UV 폭로시험을 거친 FRP Hybrid Bar에도 유효하게 평가되었다. UV 폭로시험을 거친 FRP Hybrid Bar는 일반 FRP Hybrid Bar와 거의 비슷한 인장거동을 나타내었으며, 동결융해 180cycle의 진행에도 불구하고 일반철근, FRP Hybrid Bar, UV 폭로를 거친 FRP Hybrid Bar의 인장거동은 큰 변화를 나타내지 않았다. 본 연구에서는 UV 폭로 및 동결융해 환경이 FRP Hybrid Bar의 외관 및 인장 특성에 큰 영향을 미치지 못하는 것으로 판단되지만, 충격에 따른 규사코팅의 박락은 콘크리트와의 부착력에 영향을 미치므로 이에 대한 고려가 필요하다.

• 동의생리병리학회지
• /
• 제28권1호
• /
• pp.94-101
• /
• 2014

We studied to investigate the erythema reduction effects generated by Gagam-Jawoonaek(GJ) application(appl.) after UV exposure. Twenty women in their twenties to fifties with no skin diseases were recruited. We exposed UV as a 6 subsites on the left upper arm of subjects using multi-port solar simulator. After setting Gagam-Jawoonaek(GJ) application(appl.) subsites and non-appl. subsites, we measured erythema degrees($a^*$ values) of the subsites using spectrophotometer. We measured $a^*$ values four times(before UV exposure, before application of GJ, twenty-four and forty-eight hours after first application of GJ). We analyzed data using student's t-test. After UV exposure, $a^*$ values on the left upper arm increased. Twenty-four hours after first GJ treat., the changes of $a^*$ value on GJ treat. subsites($1.22{\pm}0.13AU$) were bigger than GJ non-treat. subsites($1.04{\pm}0.12AU$), but there was no statistically significance. Forty-eight hours after first GJ treat., the changes of $a^*$ value on GJ treat. subsites($1.95{\pm}0.11AU$) were bigger than GJ non-treat. subsites($1.58{\pm}0.13AU$), a statistically significance. Gagam-Jawoonaek could decrease erythema by UV exposure.

• Current Photovoltaic Research
• /
• 제6권3호
• /
• pp.81-85
• /
• 2018

The photovoltaic modules installed in the actual field are affected by various external environments and the electrical performance output value is generally lowered compared to initial output value. The most of photovoltaic modules consists of low iron glass, encapsulant (EVA), back sheet, frame and junction box assembly based on the solar cells. In this paper, the characteristics of encapsulant which is an important constituent material of photovoltaic module were verified by maximum power determination, electro luminescence images, yellowness index measurement, and gel content measurement after ultraviolet (UV) irradiation exposure. The most commonly installed 72 cells crystalline photovoltaic modules were tested after various UV exposure of 0, 15, 30, and $60kWh/m^2$ and compared with the reference module. After UV exposure of $15kWh/m^2$, which is the current international test condition, a small amount of change was observed in yellowness index and electroluminescence, while a gell content rapidly increased. At a cumulative dose of $60kWh/m^2$, which will be a new international test condition in the near future, however, the yellowness index increased sharply and showed the greatest output power drop.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.214-217
• /
• 1999

Polymeric composite insulators have been in use for outdoor insulation. However, our knowledge about their long-term performance in a outdoor environment is still very limited. Especially, these insulator are subjected to the environmental stress such as ultraviolet radiation. Hence, in this paper. the influence of UV radiation on the aging of the shed materials was evaluated. For the aging evaluation, these insulators studied by experiment methods such as contact angle measurement. oxidation induced time. SEM/EDX, FTRI-ATR, tracking test for the different insulator samples. With the increased UV exposure time, samples are shown to exhibit degradation comparable to those of new ones

• 한국세라믹학회지
• /
• 제45권6호
• /
• pp.345-349
• /
• 2008

$TiO_2$ coating ceramic tile for self-cleaning purpose was prepared by the precipitant dropping method using $TiCl_4$ as a precursor. $TiO_2$ film was formed on the ceramic tile by spray-coating technique and heat-treated at $500^{\circ}C$ for 1 h. The size and crystalline structure of $TiO_2$ particles were 15.3 nm and anatase phase. The outdoor exposure tests were conducted and the effects of outdoor exposure test conditions, such as exhaust concentration of contamination materials (test places), the UV light intensity (irradiation direction) and coating amounts of $TiO_2$ on the self-cleaning properties were investigated by the brightness measurements. As a results, self-cleaning property of $TiO_2$ coating tile was affected by the coating amount of $TiO_2$ however, not affected by the UV light intensity included in sun's ray (irradiation direction). $TiO_2$ coating ceramic tile can be utilized for exterior finishing materials because of self-cleaning property of $TiO_2$ coating tile.

• 대한물리치료과학회지
• /
• 제21권1호
• /
• pp.37-43
• /
• 2014

Background : The purpose of this study is to verify the type of influence on the skin color according to the photoaging symptoms depending on the degree of external activities among the factors that influence the skin due to UV exposure and to obtain the basic study data on the physical therapy of the skin. Methods : In this study, in order to investigate the type of influence on the skin color according to the photoaging symptoms when the body is exposed to the UV rays having various effects on our body, a study was conducted using questionnaires and skin color measurement tool targeting 20 male college soccer students with many external activities and the senior high school students who has relatively less external activities due to the preparation for college entrance. The skin color was measured and the results were compared. Result : In the test group having relatively higher external activities, while they had less use of the sunscreen, they had more degree of UV exposure, and for the recognition of ultraviolet hazard, more were aware that it was harmful. In addition, in the skin color measurement test conducted targeting the son and the father in order to investigate the association between the skin color and the genetic factors, the experimental group showed a significant difference(p<.05) but the control group did not show any significant difference(p>.05). Conclusion : Based on such study results, the UV exposure time and the use of sunscreen are thought to be an important factor in the skin care.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.455-460
• /
• 2009

A number of factors combine to make ultraviolet radiation a superior means of water purification for ground water, rainwater harvesting systems and so on. Ultraviolet radiation is capable of destroying all types of bacteria. Additionally, ultraviolet radiation disinfects rapidly without the use of heat or chemical additives which may undesirably alter the composition of water. In a typical operation, water enters the inlet of a UV lamp and flows through the annular space between the quartz sleeve and the outside chamber wall. The irradiated water leaves through the outlet nozzle. Several design features are combined to determine the dosage delivered. The first is Wavelength output of the lamp, the Second is Length of the lamp - when the lamp is mounted parallel to the direction of water flow, the exposure time is proportional to the length of the lamp, the third is Design water flow rate - exposure time is inversely related to the linear flow rate, the forth is Diameter of the purification chamber - since the water itself absorbs UV energy, the delivered dosage diminishes logarithmically with the distance from the lamp. In this paper, It describe the how to design optimal UV disinfection device for ground water and rainwater. To search the optimal design method, it was performed computer simulation with 3D-CFD discrete ordinates model and manufactured prototype. Using proposed design method manufactured prototype applied to disinfection test and proved satisfied performance.

• Smart Structures and Systems
• /
• 제22권2호
• /
• pp.161-166
• /
• 2018

In the last decade, there has been an exponential increase of scientific interest in smart additive manufacturing (AM) technology. Among the different AM techniques, one of the most commonly applied processes is digital light processing (DLP). DLP uses a digital projector screen to flash an ultraviolet light which cures photopolymer resins. The resin is cured to form a solid to produce parts with precise high dimensional accuracy. During the curing process, there are several process parameters that need to be optimized. Among these, the exposure time affects the quality of the 3D printed specimen such as mechanical strength and dimensional accuracy. This study examines optimal exposure times and their impact on printed part. It was found that there is optimal exposure time for printed part to have appropriate mechanical strength and accurate dimensions. The gel fraction and TGA test results confirmed that the improvement of mechanical properties with the increasing UV exposure time was due to the increase of crosslinked network formation with UV exposure time in acrylic resins. In addition, gel fraction and thermogravimetric analysis were employed to microscopically investigate how this process parameter impacts mechanical performance.

• 보존과학회지
• /
• 제21권
• /
• pp.41-48
• /
• 2007

본 연구에서는 현재 철기 유물의 복원에 일반적으로 사용되고 있는 5종의 상용 에폭시 수지(Araldite rapid, Araldite AW 106, Araldite SV 427, Devcon, CDK)를 선택하여 온도, 자외선, 그리고 철기 유물의 부식인자 중 하나인 수분에 대한 내후성을 조사하였다. 각각의 에폭시 수지는 온도 상승에 따라 일정하게 부피가 변화되는 것을 알 수 있었으며, 특히 $40^{\circ}C$와 $70^{\circ}C$ 사이에서 급격한 변형이 일어나는 것을 확인하였다. UV에 노출시켰던 에폭시 수지는 모두 표면의 색상이 큰 폭으로 변화되었다. 실내조건의 경우는 모든 시험편의 색차(${\Delta}E$)가 2미만으로 색상의 변화가 약하였다. 에폭시 수지 시료 표면의 수분에 대한 평형 접촉각은 Araldite rapid>AW 106>Devcon>SV 427>CDK의 순서로 나타났다. 에폭시 수지를 UV에 노출시킨 경우 평형접촉각은 전반적으로 모두 감소하였으나, SV 427이 가장 안정적인 것으로 나타났다.

• 한국표면공학회지
• /
• 제46권3호
• /
• pp.99-104
• /
• 2013

The simple and cost-effective microfabrication method of photosensitive glass (PSG) using metal patterning and blank exposure was proposed. Conventional photolithography for micromachining of PSG needs a costly quartz mask which has high transmittance as an optical property. However, in this study the process was improved through the combination of micro-patterned Ti thin film and blank UV exposure without quartz mask. The effect of UV exposure time as well as the DHF etching condition was investigated. UV exposure test was performed within the range from 3 min to 9 min. The color and etch result of PSG exposed for 5 min were the most clear and effective to etch more precisely, respectively. The etching results of PSG in diluted hydrofluoric acid (DHF) with a concentration of 5, 10, 15 vol% were compared. The effect on the side etch was insignificant while the etch rate was proportional as the concentration increased. 10 vol% DHF results not only high etch rate of 75 ${\mu}m/min$ also lower side etch value after PSG etching. This method facilitates the microfabrication of PSG with various patterns and high aspect ratio for applying to advanced applications.