• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.1
• /
• pp.63-72
• /
• 2020

Dissolved hexavalent uranium can exist in the form of several different chemical species. Furthermore, species distributions depend on the pH value of the aqueous solution. Representatively, UO₂²⁺, UO₂OH⁺, (UO₂)₂(OH)₂²⁺, and (UO₂)₃(OH)₅⁺ species coexist in solutions at acidic and circumneutral pH values. When amorphous silica particles are suspended in an aqueous solution, the dissolved chemical species are easily adsorbed onto silica surfaces. In this study, it was examined whether the species distribution of the adsorbed U(VI) on a silica surface followed that of the dissolved U(VI) in an aqueous solution. Time-resolved luminescence spectra of three different dissolved species (UO₂²⁺, UO₂OH⁺, and (UO₂)₃(OH)₅⁺) and two different adsorbed species (≡SiO₂UO₂, ≡SiO₂(UO₂)OH^-, or ≡SiO₂(UO₂)₃(OH)^5-) were measured in the pH range 3.5-7.5. The spectral shapes of these chemical species were compared by changing the pH value; consequently, it was confirmed that the species distribution of the adsorbed U(VI) species was different from that of the dissolved U(VI) species.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2880-2886
• /
• 2020

A small leak occurring on the surface of a fuel rod due to damage exposes UO₂ to a steam atmosphere. During this time, fission gas trapped inside the fuel rod leaks out, and the gas leakage can be increased due to UO₂ oxidation. Numerous studies have focused on the steam oxidation and its thermodynamic calculation in UO₂. However, the thermodynamic calculation of the UO₂ oxidation in a pressurized water reactor (PWR) environment has not been studied extensively. Moreover, the kinetics of the oxidation of UO₂ pellet also has not been investigated. Therefore, in this study, the thermodynamics of UO₂ oxidation under steam injection due to a damaged fuel rod in a PWR environment is studied. In addition, the diminishing radius of the UO₂ pellet with time in the PWR environment was calculated through an experiment simulating the initial time of steam injection at the puncture.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.1013-1021
• /
• 2020

A combination of simultaneous thermal analysis, evolved gas analysis and non-ambient XRD techniques was used to characterise and investigate the conversion reactions of ammonium uranates into uranium oxides. Two solid phases of the ternary system NH₃ - UO₃ - H₂O were synthesised under specified conditions. Microspheres prepared by the sol-gel method via internal gelation were identified as 3UO₃·2NH₃·4H₂O, whereas the product of a typical ammonium diuranate precipitation reaction was associated to the composition 3UO₃·NH₃·5H₂O. The thermal decomposition profile of both compounds in air feature distinct reaction steps towards the conversion to U₃O₈, owing to the successive release of water and ammonia molecules. Both compounds are converted into α-U₃O₈ above 550 ℃, but the crystallographic transition occurs differently. In compound 3UO₃·NH₃·5H₂O (ADU) the transformation occurs via the crystalline β-UO₃ phase, whereas in compound 3UO₃·2NH₃·4H₂O (microspheres) an amorphous UO₃ intermediate was observed. The new insights obtained on these uranate systems improve the information base for designing and synthesising minor actinide-containing target materials in future applications.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1099-1109
• /
• 2020

The performance of gadolinium burnable absorber (GdBA) for reactivity control in UO₂ and (U, Th)O₂ fuels and its impact on spent fuel characteristics was performed. Five fuel assemblies: one without GdBA fuel rod and four each containing 16, 24, 34 and 44 GdBA fuel rods in both fuels were investigated. Reactivity swing in all the FAs with GdBA rods in UO₂ fuel was higher than their counterparts with similar GdBA fuel rods in (U, Th)O₂ fuel. The excess reactivity in all FAs with (U, Th)O₂ fuel was higher than UO₂ fuel. At the end of single discharge burn-up (~ 49.64 GWd/tHM), the excess reactivity of (U, Th) O₂ fuel remained positive (16,000 pcm) while UO₂ fuel shows a negative value (-6,000 pcm), which suggest a longer discharge burn-up in (U, Th)O₂ fuel. The concentration of plutonium isotopes and minor actinides were significantly higher in UO₂ fuel than in (U, Th)O₂ fuel except for ²³⁶Np. However, the concentration of non-actinides (gadolinium and iodine isotopes) except for ¹³⁵Xe were respectively smaller in (U, Th)O₂ fuel than in UO₂ fuel but may be two times higher in (U, Th)O₂ fuel due to its potential longer discharge burn-up.

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.4052-4059
• /
• 2021

The microstructure of the fuel pellet plays an essential role in fission gas buildup and release and is critical for the safe and continued operation of nuclear power stations. Structural analysis of uranium dioxide (UO₂)-molybdenum (Mo) composite fuel pellets prepared at a range of sintering temperatures from 1300 to 1800 ℃ was performed. Mo micro and nanoparticles were used in making the composite pellets. A systematic investigation into the influence of processing parameters during Spark Plasma Sintering (SPS) of the pellets on the microstructure, texture, grain size, and grain boundary characters of UO₂-Mo is presented. UO₂-Mo composite show significant differences in the fraction of general boundaries and also special/coincident site lattice (CSL) boundaries. EBSD orientation maps demonstrated that <111> texturing was observed in the pellets fabricated at 1500 ℃. The experimental investigations suggest that UO₂-Mo composite pellets have favorable microstructural features compared to the UO₂ pellet.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1756-1763
• /
• 2020

The paper studies spark plasma sintering (SPS) of industrially used UO₂-based fuel containing integral fuel burnable absorber (IFBA) of neutrons Gd₂O₃. Densification dynamics of pristine UO₂ powder and the one added with 2 and 8 wt% of Gd₂O₃ under ultrasonication in liquid has been studied under SPS conditions at 1050, 1250, and 1450 ℃. Effect of sintering temperature on phase composition as well as on O/U stoichiometry has been investigated for UO₂ SPS ceramics. Sintering of uranium dioxide added with Gd₂O₃ yields solid solution (U,Gd)O₂, which is isostructural to UO₂. SEM with EDX and metallography were implemented to analyze the microstructure of the obtained UO₂ ceramics and composite UO₂-Gd₂O₃ one, particularly, open porosity, defects, and Gd₂O₃ distribution were studied. Microhardness, compressive strength and density were shown to reduce after addition of Gd₂O₃. Obtained results prove the hypothesis on formation of stable pores in the system of UO₂-Gd₂O₃ due to Kirkendall effect that reduces sintering efficiency. The paper expands fundamental knowledge on pros and cons of fuel fabrication with IFBA using SPS technology.

• Korean Journal of Materials Research
• /
• v.30 no.10
• /
• pp.533-541
• /
• 2020

UO₂ kernels, a key component of fuel elements for high temperature gas cooled reactors, have usually been prepared by sol-gel methods. Sol-gel processes have a number of advantages, such as simple processes and facilities, and higher sphericity and density. In this study, to produce 900 ㎛-sized UO₂ particles using an external gelation process, contact length extension of the NH₃ gas of the broth droplets pass and the improvement of the gelation device capable of spraying 14 M-NH₄OH solution are used to form 3,000 ㎛-sized liquid droplets. To produce high-sphericity and high-density UO₂ particles, HMTA, which promotes the gelation reaction in the uranium broth solution, is added to diffuse ammonium ions from the outside of the gelation solution during the aging process and generate ammonium ions from the inside of the ADU gel particles. Sufficient gelation inside of ADU gel particles is achieved, and the density of the UO₂ spheres that undergo the subsequent treatment is 10.78 g/㎤; the sphericity is analyzed and found to be 0.948, indicating good experimental results.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.3
• /
• pp.229-233
• /
• 2015

Developing novel anode materials to replace the Pt anode currently used in electrolytic reduction is an important issue on pyroprocessing. In this study, the electrochemical behavior of TiN was investigated as the conductive ceramic anode which evolves O₂ gas during the reaction. The feasibility and stability of the TiN anode was examined during the electrolytic reduction of UO₂. The TiN anode could electrochemically convert UO₂ to metallic U in a LiCl–Li₂O molten salt electrolyte. No oxidation of TiN was observed during the reaction; however, the formation of voids in the bulk section appeared to limit the lifetime of the TiN anode.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2206-2214
• /
• 2023

The existing wet reconversion processes for the recovery of scraps generated in manufacturing of nuclear fuel are complex and require several unit operation steps. In this study, it is attempted to simplify the recovery process of high-quality fuel-grade UO₂ powder. A novel wet reconversion process for uranyl nitrate hexahydrate solution is suggested by using a newly developed pulsed fluidized bed reactor, and the resultant chemical characteristics are evaluated for the intermediate ammonium uranate hydrate product and subsequently converted UO₂ powder, as well as the compliance with nuclear fuel specifications and advantages over existing wet processes. The UO₂ powder obtained by the suggested process improved fuel pellet properties compared to those derived from the existing wet conversion processes. Powder performance tests revealed that the produced UO₂ powder satisfies all specifications required for fuel pellets, including the sintered density, increase in re-sintered density, and grain size. Therefore, the processes described herein can aid realizing a simplified manufacturing process for nuclear-grade UO₂ powders that can be used for nuclear power generation.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1541-1548
• /
• 2022

The thermal conductivity of uranium oxide (UO₂) containing pores and grain boundaries is investigated using continuum-level simulations based on the finite-difference method in two and three dimensions. Steady-state heat conduction is solved on microstructures generated from the phase-field model of the porous polycrystal to calculate the effective thermal conductivity of the domain. The effects of porosity, pore size, and grain size on the effective thermal conductivity of UO₂ are quantified. Using simulation results, a new empirical model is developed to predict the effective thermal conductivity of porous polycrystalline UO₂ fuel as a function of porosity and grain size.