Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

Ammonium uranate hydrate wet reconversion process for the production of nuclear-grade UO2 powder from uranyl nitrate hexahydrate solution

  • Received : 2022.12.06
  • Accepted : 2023.02.13
  • Published : 2023.06.25
Download PDF
⟨ Previous Next ⟩

Abstract

The existing wet reconversion processes for the recovery of scraps generated in manufacturing of nuclear fuel are complex and require several unit operation steps. In this study, it is attempted to simplify the recovery process of high-quality fuel-grade UO2 powder. A novel wet reconversion process for uranyl nitrate hexahydrate solution is suggested by using a newly developed pulsed fluidized bed reactor, and the resultant chemical characteristics are evaluated for the intermediate ammonium uranate hydrate product and subsequently converted UO2 powder, as well as the compliance with nuclear fuel specifications and advantages over existing wet processes. The UO2 powder obtained by the suggested process improved fuel pellet properties compared to those derived from the existing wet conversion processes. Powder performance tests revealed that the produced UO2 powder satisfies all specifications required for fuel pellets, including the sintered density, increase in re-sintered density, and grain size. Therefore, the processes described herein can aid realizing a simplified manufacturing process for nuclear-grade UO2 powders that can be used for nuclear power generation.

Keywords

Acknowledgement

This work was supported by a research grant provided by KEPCO Nuclear Fuel (No. 12116).

References

  1. J.H. Park, Nuclear Chemical Engineering, first ed., Hans House, Seoul, 2012, p. 373. 
  2. J.A. Seneda, F.F. Figueiredo, A. Abrao, F.M.S. Carvalho, E.U.C. Frajndlich, Recovery of uranium from the filtrate of 'ammonium diuranate' prepared from uranium hexafluoride, J. Alloys. Compd. 323-324 (2001) 838-841.  https://doi.org/10.1016/S0925-8388(01)01156-2
  3. K.C. Jeong, T.J. Kim, J.H. Choi, J.H. Park, S.T. Hwang, A study on the waste treatment from a nuclear fuel powder conversion plant, J. Korean Ind. Eng. Chem. 7 (1996) 1167-1168. 
  4. L.K. Felker, R.J. Vedder, E.A. Walker, E.D. Collins, in: Montpellier Atalante (Ed.), Product Conversion: The Link between Separations and Fuel Fabrication, 2008. France, May 19-22. 
  5. W.H. Hedley, R.J. Roehrs, W.T. Trask Jr., Production of uranium dioxide by flame denitration, Ind. Eng. Chem. Process. Des. Dev. 3 (1964) 11-14.  https://doi.org/10.1021/i260009a005
  6. K. Dvoeglazov, Y. Kulyako, S. Vinokurov, B. Myasoedov, M. Dmitriev, O. Ushakov, Y. Mochalov, A. Shadrin, P. Smolkin, Synthesis of mixed actinide oxides using microwave radiation, Energies 15 (2022) 1-9.  https://doi.org/10.3390/en15186618
  7. S.A. El-Fekey, M.N.A. El-Hakim, N.H. Rofail, Solid phase decomposition of ammonium uranate, Thermochim. Acta 54 (1982) 329-332.  https://doi.org/10.1016/0040-6031(82)80023-3
  8. P.G. Alfredson, Pilot Plant Development of Processes for the Production of Nuclear Grade Uranium Oxide, E245, Australian Atomic Energy Commission (AAEC), 1972, pp. 10-11. 
  9. J.L. Woolfrey, The effect of pH on the properties of ammonium uranate precipitated with gaseous ammonia, Aust. At. Energy Comm. (AAEC) E397 (1976) 4. 
  10. S. Manna, S.B. Roy, J.B. Joshi, Study of crystallization and morphology of ammonium diuranate and uranium oxide, J. Nucl. Mater. 424 (2012) 94-100.  https://doi.org/10.1016/j.jnucmat.2012.02.012
  11. S.H. Na, S.H. Kim, Y.W. Lee, D.S. Sohn, Effect of ball-mill treatment on powder characteristics, compaction and sintering behaviors of ex-AUC and ex-ADU UO2 powder, J. Korean Nucl. Soc. 34 (2002) 61-63. 
  12. E.H. Kim, C.S. Choi, J.H. Park, I.S. Chang, A study on calcination and reduction of AUC, J. Korean Ceram. Soc. 30 (1993) 284-285. 
  13. S. Manna, P. Karthik, A. Mukherjee, J. Banerjee, S.B. Roy, J.B. Joshi, Study of calcinations of ammonium diuranate at different temperatures, J. Nucl. Mater. 426 (2012) 229-232.  https://doi.org/10.1016/j.jnucmat.2012.03.035
  14. S. Paik, S. Biswas, S. Bhattacharya, S.B. Roy, Effect of ammonium nitrate on precipitation of ammonium di-uranate (ADU) and its characteristics, J. Nucl. Mater. 440 (2013) 34-38.  https://doi.org/10.1016/j.jnucmat.2013.04.011
  15. J. Ceder, Characterization of Uranium Oxide Powders and Sinterability, KTH Royal Institute of Technology, 2021, pp. 1-32. KTH-299501. 
  16. M. Setyadji, F. Aliyah, Characteristics of uranium dioxide (UO2) kernel produced by sintering process using modified sintering reactor, Mater. Sci. Eng. 553 (2019), 012040. 
  17. H.S. Yoo, S.J. Lee, H.S. Kim, J.W. Kim, Characteristic analysis of oxidized ex-DC UO2 powder according to oxidation temperature, in: Korean Nuclear Society Spring Meeting, 2001. Jeju, Korea, May 24-25. 
  18. K.S. Kim, K.W. Song, K.W. Kang, J.H. Kim, Y.M. Kim, Properties of compacts and pellets made using bimodal sized UO2 powder, J. Korean Nucl. Soc. 31 (1999) 608-609.