• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.161-168
• /
• 2009

Ubiquitous application is in need of high-level technology to meet various requests for ubiquitous service. In order to adopt ubiquitous technology in not only pilot projects but also regional services, many projects like u-City are implemented in and outside the country. RFID has been known as one of the important technology to provide with core benefits of Ubiquitous services. Because each band of RFID technology has merits and demerits concurrently, single-band RFID system has limitations for various RFID services. Thus, we developed dual-band RFID system enable to provide with 13.56MHz and 2.45GHz RFID service at the same time to compensate the shortage of single-band RFID system. Also we have considered the way that the firmware would control signals without collision, studied battery life and range for tag, and made hardware for dual-band RFID service.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.645-648
• /
• 2009

유비쿼터스 기술을 활용한 U-city와 같은 지역적인 서비스들이 다양한 분야에서 응용되고 있다. 유비쿼터스 기술 중 하나인 RFID는 사용하는 주파수에 따라 장 단점을 가지고 있기 때문에 단일 대역 주파수를 활용한 RFID 시스템은 다양해지는 사용자의 요구를 충족시키기에 명확한 한계를 가지고 있다. 따라서 연구를 통해 13.56MHz와 2.45GHz를 동시에 지원하는 Dual-Band RFID시스템을 개발하여 단일대역 RFID 서비스의 단점을 보완한다. 이를 위해 두 대역의 주파수를 지원하는 하드웨어와 소프트웨어를 개발하고, 능동형 태그의 배터리 수명에 관한 연구를 통해 보다 효율적으로 Dual-Band RFID 시스템을 구성한다.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.574-580
• /
• 2009

This study is investigate the bending behavior of real size RC beams strengthened with carbon fiber sheets. For experimental study, 1 control beam and 8 strengthened beams of real size(4 NU-beams and 4 U-beams) are tested and compared. NU-beam has not a V-shaped band and V-beam has a V-shaped band. The variables of experiment are composed of the number of carbon fiber sheets, the existence of U-shaped band, and four point loading, etc. The experimental results showed that the strengthening system with U-shaped band controls the premature debonding and provides a more ductile failure mode than the strengthening system without V-shaped band. It can be found from the load-deflection curves that as the number of fiber sheets is increased, the maximum strength and the flexural rigidity is increased. For the strengthening method with carbon fiber sheets of the real size RC beams, it is required the finding a solution to the bonding problem.

• Fashion & Textile Research Journal
• /
• v.10 no.5
• /
• pp.676-682
• /
• 2008

In this study a guideline of the 3D-fit pattern for the ECG(electrocardiogram) measurement of elderly's u-healthcare clothes was proposed. In the screening test of the ECG measurement band, ECG peak band was observable at the band pressure of 0.20 kPa. By employing a 3D body image, tight-fit 3D patterns were made at two different reduction rates of 21%(pattern 1) and 33%(pattern 2), and corresponding pressure of both of the clothes were 0.25 kPa and 0.54 kPa, respectively. Typical waves of ECG were found in both stationary and moving position. In terms of the subjective evaluation of the u-healthcare clothes when worn, it was confirmed that reduction pattern 1(0.25 kPa) conveyed comfortable clothing pressure and pleasantness, which is very close to the result of screening test of ECG band experiment. As results, it is recommended that reduction rate should be adjusted, so that clothing pressure is about 0.2 kPa for the elderly's comfortable and efficient u-healthcare clothes.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.7
• /
• pp.827-834
• /
• 2014

In this paper, a triple-band U-shaped monopole antenna with T-shaped stub for WLAN(Wireless Local Area Networks)/WiMAX(World interoperability for Microwave Access) applications. The proposed antenna is based on a planar monopole design, and composed of U-shaped of radiating patch, T-shaped strip in U-shaped, for triple-band operation. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is fabricated. The numerical and experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. And characteristics of gain and radiation patterns are determined for WLAN/WiMAX application.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2518-2525
• /
• 2015

In this paper, we propose a UWB(Ultra Wide Band) antenna with CPW(Coplanar Waveguide) structure notched the 802.11a(5.15 ~ 5.825 GHz) band by using the U shaped slot. The proposed antenna not only shows Ultra-Wideband characteristic(3.1 ~ 10.6 GHz) suitable for UWB communications but has partially notched-band characteristic to reject 5 GHz WLAN band(5.15 ~ 5.825 GHz). The antenna is designed on an FR-4 substrate of which the dielectric constant is 4.4, and its overall size is $30mm(W){\times}20mm(L){\times}1mm(t)$. Fabricated antenna satisfied $VSWR{\leq}2$ in 3.1 ~ 10.6 GHz except for the band rejection of 5.15 ~ 5.825 GHz. And measured results of gain and radiation patterns characteristics displayed determined for operating bands.

• Journal of Advanced Navigation Technology
• /
• v.10 no.4
• /
• pp.342-347
• /
• 2006

In this paper, we have designed 800[MHz] broad band antenna that is improves a narrow bandwidth problem of microstrip antenna and it will be able to integrate GSM, TRS band including the CDMA band. It had L-shaped feeding structure and added the U-slot it used a duplex resonance effect. Also for the improvement of profit the stack it did with the perpendicular. It seems to be good quality that design and manufactured antenna frequency bandwidth(VSWR 2:1) is 789~1086[MHz] with 297[MHz](33%). Also the E-plan and H-plan all profit 9.4[dBi] above, 3[dB] beam width was visible the quality which above $61^{\circ}$ is improved.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.7
• /
• pp.2188-2195
• /
• 2000

This paper deals with the problem of determining small-bands enclosing a given set of points on the sphere. The small-band is a spherical region, whose boundary is composed of two circles, and which does not contain any great circle. It is a kind of domains that is derived from formalizing the local accessibility problems for 3-axis NC machining into sperical containment problems so as to avoid the grouping. It also can be generated in 4- and 5-axis machine. When a set of points U and the size of a great-band are given, the methods for computing a feasible band and all feasible bands enclosing U in O(n) and O(n log n) time have been suggested, respectively. The methods can be applied into the cases of small bands since the solution region may contain holes. In this paper, we concentrate on the method for determining the smallest small-band enclosing U and suggest an O(n long n) time algorithm, where n is the number of points on the sphere.

• ETRI Journal
• /
• v.27 no.4
• /
• pp.411-417
• /
• 2005

$Pr^{3+}-doped$ selenide glass optical fiber, which guarantees single-mode propagation of above at least 1310 nm, has been successfully fabricated using a Ge-Ga-Sb-Se glass system. Thermal properties such as glass transition temperature and viscosity of the glasses have been analyzed to find optimum conditions for fiber drawing. Attenuation loss incorporating the effects of an electronic band gap transition, Rayleigh scattering, and multiphonon absorption has also been theoretically estimated for the Ge-Ga-Sb-Se fiber. A conventional double crucible technique has been applied to fabricate the selenide fiber. The background loss of the fiber was estimated to be approximately 0.64 dB/m at 1650 nm, which can be considered fairly good. When excited at approximately 1470 nm, $Pr^{3+}-doped$ selenide fiber resulted in amplified spontaneous emission and saturation behavior with increasing pump power in a U-band wavelength range of 1625 to 1675 nm.

• The Journal of Korean Physical Therapy
• /
• v.16 no.3
• /
• pp.152-160
• /
• 2004

The purpose of this study was to investigate the effect of elastic band based of PNF pattern on the U/E function in the spinal cord injury patient. 11 subjects with spinal cord injury participated in this study. They took elastic band excercise 5 times per week for 8 weeks. One time excercise spent 35minutes. The therapeutic effect was evaluated by Cybex 6000, BTE Work Simulator, how many seconds they needed to walk 100 meters. 11 cases were examined before, after 8 week, elastic band excercise. The results of this study are as follows; 1. Isokinetic power by Cybex 6000 : The elbow flexion, shoulder flexion and extension were significant difference between test-retest(p<.05). but elbow extension were not significant difference between test-retest. 2. BTE Work Simulator : Wheelchair Propulsion and Steering Torque were significant difference between test-retest(p<.05). 3. Wheelchair Propulsion velocity : There were significant difference between test-retest(p<.05). The findings suggest that SCI patients can improve their Isokinetic power on shoulder and elbow joint, wheelchair propulsion and Steering Torque by BTE Work Simulator, Wheelchair Propulsion velocity through elastic band based of PNF pattern.