• Journal of the Korea Institute of Building Construction
• /
• v.10 no.1
• /
• pp.73-79
• /
• 2010

Deck plates have been widely used for steel framework due to their merits in terms of schedule reduction and work repetition. For this reason, most of the previous studies related to deck plates have focused on the development of form type and their constructability. In this study, through an actual case study and interviews with experts, a simulation model was developed using the CYCLONE method. Based on this model, this study not only analyzed the productivity of the work process of the deck plate in steel framework, but also identified the occurrence of idle time in the work process. In addition, using a sensitivity analysis, productivity and duration could be analyzed according to variation of input resources. Based on the results, this paper suggests a way to improve the productivity of deck plate work in steel frameworks. Using the model, it is expected that project managers would be able to predict the productivity and total duration of the deck plate work in the early project phase, which will enable managers to make an appropriate plan for input resources.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.23-30
• /
• 2012

In this paper, we suggested the integration between automatic enforcement system and UTIS(Urban Traffic Information System) base station. UTIS base station and automatic enforcement system are different in the height of installation and the type of communication network. UTIS base station is 25 meter high and communicate with center system by optical network. Whereas automatic enforcement system is 6.6 meter high and communicate with center system by rental network. For the purpose of suggesting the efficient method of integration, research was as in the following. We found that the number of integrated system was 1,628 through the present state of analysis and UTIS equipment was satisfied with the required specifications through field testing. Also we suggested the appropriate configuration of the integrated system and analyzed that the cost of the integrated system installment is 1/5 lower than that of the legacy system installment.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.345-352
• /
• 2022

The existing NATM (New Austrian Tunneling Method) has induced civil compliants due to blasting vibration and noise. Machanized excavation methods such as TBM (Tunnel Boring Machine) are being adopted in the planning and construction of tunneling projects. Shield TBM method is composed of repetition processes of TBM excavation and segment installation, the machine has to be stopped during the later process. Consecutive excavation technology using helical segment is under developing to minimize the stoppage time. The modification of thrust jacks and module are planned to ensure the advance force acting on the inclined surface of helical segment. Also, the integrated system design of hydraulic circuit will be remodeled. This means that the system deactivate the jacks on the installing segment while the others automatically act the thrusting forces on the existing segments. This report briefly introduces the mechanical research part of the current consecutive excavation technological development project of TBM.

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.49-57
• /
• 2020

The KC-100 has completed civil type certification with the Ministry of Land, Infrastructure, and Transport, and is currently under development as an unmanned aerial vehicle as part of the Ministry of Land, Infrastructure, and Transport. The Certification Technology of small Unmanned Airplane system (CTsUA system), which is an unmanned KC-100, is being developed to enable the installation of heavy-duty mission equipment and long-time flight missions. This study investigated the process and results of analyzing various parameters such as aircraft weight, airspeed, flight altitude, required horsepower, and fuel consumption at each stage to construct a mission profile based on the operational concept of the CTsUA system. To maintain a maximum take-off weight of 3,600 lbs (1,633 kg), the analysis determined that the weight of the application equipment for the unmanned system should be kept below 80 lbs (36 kg).

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.269-276
• /
• 2009

South Korea having military power within the $10^{th}$ in world ranking is the biggest single institution among public institutions in Korea and comprises force of over seven hundred thousand soldiers. However, outworn equipments and efficiency problem have issued. So, this study is to search the distribution state of new-renewable energy and to analyze application plan on the basis of interview with a official in charge in military. Analysis process is the first, classify surveyed military facilities into troops and the geographical factor. Second, classify a scale and type of facilities that new-renewable energy is supplied. Third, find consideration facts on the basis of interview with a official in charge. On the results of the survey, new-renewable energy applied to the military facility is photovoltaic, solar heat, wind power and geo-thermal energy. Also, divide military into the army, navy, air force and marine, visit 14 units and analyze the official's opinion. This study will deduce LCCA(Life cycle cost analysis) considered expenses for the installation and maintenance, and will be basic research that suggest an appropriate new-renewable energy model in military.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.11
• /
• pp.5-10
• /
• 2020

Although pile driver overturning accidents at construction site are not frequent, most leads to serious disasters. The main cause of accidents is uneven settlement of the ground. To prevent this, related guidelines such as KOSHA-C-101-2014, KOSH-A-GUIDE-71-2012, Occupational Safety and Health Standards, and NCS stipulate the installation of steel plates over ground. However, since the required steel plate thickness considering the self-weight of pile drivers and the underlying ground condition is not quantitatively presented, it is randomly applied in the field. In this study, the required minimum steel plate thickness was analyzed based on a numerical analysis (Plaxis 2D). Settlements and soil failure were calculated according to the different type of soils (sand, clay), load distribution and steel plate thickness (10mm, 20mm, 30mm, 40mm). Under all conditions, 10mm steel plate causes soil collapse. From thickness 20mm, the ground uneven subsidence is within 2° of the allowable leader angle.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.5-13
• /
• 2017

To lunch the Korea Space Launch Vehicle-II(KSLV-II), the second launch complex will be constructed on the Naro Space Center and Kerosene Filling System (KFS) will be also installed newly. KFS of KSLV-II launch complex system is being designed based on Naro Launch Complex. But this must supply fuel to fuel tanks of the vehicle with only a supply pump because KSLV-II is a 3-stage launch vehicle unlike Naro Launch Vehicle or Test Launch Vehicle (TLV). A sudden rise of pump output pressure is recognized during fuel filling scenario selection process. This occurs because return flow can not actively deal with a lot of flow change using flow control method of orifice type. To solve this problem, it is verified that fuel can be stably supplied by installation of accumulator and an appropriate adjustment of filling mode change sequence through flow analysis of various cases.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.124-134
• /
• 2016

Research on low height noise barriers installed adjacent to railways to reduce the height of the noise barrier has actively progressed in many countries except Korea. The performance of low height noise barriers is evaluated to identify barrier acoustic characteristics using a scale model of the barrier in the present research. As shown in the experimental results, if it is considered the installation of 'ㄱ' type noise barrier, sound absorption material should be installed on both the top and the vertical surfaces of the barrier to improve insertion loss. Also, an analytical method such as the boundary element method, rather than a simple empirical equation, is required to evaluate the insertion loss of the barrier. In addition, noise level increase in passenger position is very small if a barrier with sound absorption material is installed. Finally, the two dimensional boundary element method is implemented to predict the acoustic characteristics of the low height barrier; the possibility of the application is confirmed from a comparison of the results of measurements and predictions.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.105-116
• /
• 2007

A ROUNDABOUT is more effective way to improve safety and prevent delays than signal intersection. ROUNDABOUT has been known highly safe treatment that could be used as a method to reduce conflicts between vehicles, to reduce travel speed in inner or approach of intersection, and to have no speed difference between drivers than intersection. In this study, the effective analysis on the installation of ROUNDABOUT was carried out using computer-based simulation tool VISSIM, in order to evaluate performance and safety of ROUNDABOUT and develope a warrant. In conclusion, the results indicated that there was remarkable increase of Y-intersection capacity and decrese of delay, and improvement of traffic safety. Finally, A nice feature of this study is to firstly attempt to use microscopic simulator to evaluate the effectiveness of ROUNDABOUT and suggest a passible operation boundary.

• Journal of Digital Convergence
• /
• v.17 no.6
• /
• pp.19-25
• /
• 2019

Recently a number of car sharing studies have been conducted that share vehicles from a consumer perspective. Meanwhile, Japan's MLIT had empirically implemented social experiment and policy for the installation of sharing car in order to make better use of the business forms and rapidly increasing car sharing associated with express bus as a new type of transaction from a sharing economy perspective. Therefore, this study examined the case of connecting with the express bus in Japan and analyzed and discussed the contents at the practical level. In addition, data collected for 229 car sharing users were verified empirically. The multiple liner regression analysis showed that three types of perceived values effect on the usage intention in the order of economic value, time value and psychology value. These findings suggest that car sharing users' perceived values are very important for increasing the degree of satisfaction with usage intention.