• 한국안광학회지
• /
• 제8권2호
• /
• pp.111-117
• /
• 2003

국내외 썬글라스 반미러 코팅렌즈의 광학적 특성을 파악하기 위해, 분광광도계를 이용하여 반미러 코팅렌즈의 반사율을 측정하였으며, Macleod 프로그램을 이용해 계산한 결과와 비교 분석하였다. 또한 황금 색깔이 나는 TiN을 이용한 반미러 코팅렌즈를 설계하였고, 광학특성을 조사하였다. 반미러 코팅렌즈의 분석결과, 은색 투톤(two tone) 반미러 코팅은 금속 크롬(Cr)을 사용하였으며 경도를 증가시키기 위하여 크롬위에 $SiO_2$(또는 $Al_2O_3$)를 증착하여 사용하였다. 크롬 위에 증착되는 $SiO_2$의 두께는 10nm 정도가 적정한 것으로 판단된다. 칼라 반미러 코팅의 경우 디자인 결과는 각각 다음과 같다 ; blue 계열은 [air|$SiO_2$(66.3)|$TiO_2$(129.0)|$SiO_2$(62.9)|$SiO_2$(26.0)|$TiO_2$(120.3)|$SiO_2$(9.1)|glass]이며, gold 계열은 [air|$SiO_2$(60.6)|$TiO_2$(86.2)|$SiO_2$(13.5)|$TiO_2$(86.8)|$SiO_2$(214.38)|glass]이며, green 계열은 [air|$SiO_2$(74.3)|$TiO_2$(75.8)|$SiO_2$(44.3)|$TiO_2$(11.6)|$SiO_2$(160.8)|$TiO_2$(12.9)|$SiO_2$(183.3)|$TiO_2$(143.8)|glass]이며, silver 계열은 [air|$SiO_2$(21.2)|$TiO_2$(49.7)|$SiO_2$(149.3)|glass]이다. white 반미러 코팅인 경우는 [air|$SiO_2$(17nm)|$TiO_2$(43nm)(또는 $ZrO_2$)|$SiO_2$(87nm) polysiloxane($4.46{\mu}m$)|glass or CR-39]이며, 가시광선 영역(400~700 nm)에서 평균 19%의 반사율을 가지며 흡수가 적기 때문에 약 80%의 투과율을 보이는 white 타입의 반미러가 되게 된다. 황금빛 색깔을 띠는 반미러 코팅렌즈의 설계에 있어서 [air|$SiO_2$(170nm)|TiN(15nm)|glass]가 되면 CIE 좌표값은 거의 [air|Au(150nm)|glass]의 좌표값과 유사해지는 것을 볼 수 있었다.

• 대한전자공학회논문지SD
• /
• 제42권9호
• /
• pp.29-34
• /
• 2005

본 논문에서는 duty cycle-corrected analog synchronous mirror delay(DCC-ASMD)라고 불리는 새로운 구조의 내부 클럭 생성기를 제안한다. 제안된 회로는 임의의 duty ratio를 가진 외부 클럭에 대하여 duty ratio가 $50\%$로 보정된 내부 클럭을 2클럭 주기 만에 생성할 수 있다. 그러므로, 본 내부 클럭 생성기는 double data-rate (DDR) synchronous DRAM (SDRAM)과 같은 듀얼 에지 동기형 시스템(dual edge-triggered system)에 효율적으로 이용될 수 있다. 제안된 기술의 타당성을 평가하기 위하여, $0.35\mu$m CMOS 공정기술을 이용하여 제안된 내부 클럭 생성기를 구현하여 모사실험을 실행하였다. 실험 결과, 제안된 내부 클럭 생성기는, $40\~60$의 duty ratio를 갖는 외부 클럭 신호에 대하여, 50$\%$ duty ratio를 갖는 내부 클럭 신호를 2 클럭 주기 만에 발생시킬 수 있음을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1080-1081
• /
• 2015

CPV system in the desert areas or areas near the equator, as is suitable for high-temperature region. As compared to silicon solar cells, CPV system have a high proportion of a BOS (balance of system). Solar cells because of its low proportion when designing a module technology is applied in a variety of ways. Applied to the CPV system is classified into two kinds of optical technology. One of those using fresnel lens uses refraction of light energy. The other is a mirror reflection of the structure using sprays. Both of these two ways to condense the sun to collect solar cell is a form of light. And goals by using a small solar cell materials is to produce more energy. This research proposes rational design approach to calculate proper system capacity in consideration of the aforementioned factors in CPV system.

• Journal of the Optical Society of Korea
• /
• 제7권4호
• /
• pp.230-233
• /
• 2003

This study describes the conceptual design of a soft x-ray microscope system based on a laserbased source for biomedical application with high resolution (${\leq}$50nm). The laboratory scale soft x-ray microscope consists of high power laser plasma x-ray source and grazing incidence mirrors with high reflectivity. The laser plasma source used for developing this system employs Q-switched Nd-YAG pulsed laser. The laser beam is focused on a tantalum (Ta) target. The Wolter type I mirror was used as condenser optics for sample illumination and as objective mirror for focusing on a detector. The fabrication of the Wolter type I mirror was direct internal cutting using ultraprecision DTM. A hydrated biological specimen was put between the two silicon wafers, the center of which was $Si_3N_4$ windows of 100㎚ thickness. The main issues in the future development work are to make a stable, reliable and reproducible x-ray microscope system.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.37.1-37.1
• /
• 2008

Space Science and Technology Laboratory at Kyung Hee University developed an 80cm Nasmyth telescope with the joint work of Space & Astronomy, Inc. It was set up at Muju county public astronomical observatory in Jeonlabuk-Do. Nasmyth focus system was selected for the telescope to use two focal points by a rotatable tertiary mirror. Focal ratios of the telescope are f10, f5 respectively. Support of the main mirror is made with Lasalle-system. This system uses 24-points in the back side of the mirror that are all resting on small counter-weights and side support is 10-points Boll link Flexible type with 2 Lasalle type. The mount is wheel & disk type Alt-Azimuth design using DC-servo motors. External high accuracy encoder has 47,600 sine-waves/rot. These encoders are used to make real-time corrections on all gearing errors.

• 한국위성정보통신학회논문지
• /
• 제3권2호
• /
• pp.26-31
• /
• 2008

As a multi-mission GEO satellite, Communication, Ocean, and Meteorological Satellite (COMS) is scheduled to be launched in the year 2009. COMS has three different payloads: Ka-band communication payload, Geostationary Ocean Color Imager (GOCI) and Meteorological Imager (MI). Among the three payloads, MI and GOCI have several conflict relationships; one of them is that if MI mirror moves vertically larger than 4 Line Of Sight (LOS) angle while GOCI is imaging, image quality of GOCI becomes degraded. In this paper, MI scheduling algorithm to prevent GOCI's image quality degradation will be presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.102-105
• /
• 2000

A simple digital control system has been developed for the frequency stabilization of an internal mirror He-Ne laser. The system is based on one chip microprocessor with embedded Basic interpreter. To stabilize the laser output frequency, the signal such as power difference or beat frequency between two modes is supplied and processed by a microprocessor, and control signal is fed to the heating coil would round the laser tube for adjusting the spacing of the laser cavity mirror. Newly developed frequency stabilization system is totally digitized. The system and the frequency stability performance are briefly described.

• 조명전기설비학회논문지
• /
• 제25권11호
• /
• pp.83-90
• /
• 2011

There are two main types of concentrating optical systems in use today: refractive types that use Fresnel lenses, and reflective systems that use one or more mirrors. Regardless of the chosen optical system, the result is concentrated sunlight being aimed at the sensitive face of the cell, to produce more energy from less photovoltaic material. In this paper, for the achieve trackerless CPV system, CPV module included that the spherical lens with reflect mirror makes it possible to achieve high and stable power generation performance for the high concentration photovoltaic power generation system and cope with the needs for a variety of shapes and sizes in flexible manners and that the multiple cavity assemble method greatly reduces costs. Development of these high performance multi-junction CPV module promises to accelerate growth in photovoltaic power generation.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.100-101
• /
• 2002

This paper show lens design and simulation for microdisplay system with two mirror, Lens design optimized consider to spherical aberration, astigmatism, distortion, and chromatic aberration.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.380-384
• /
• 2010

A micromirror for a laser display system actuated by the electromagnetic force induced by the surface coil and the permanent magnet was designed and analyzed through the coupled physics analyses incorporating the electromagnetics, mechanics, and electrothermal analysis because the mechanical rotation of the micromirror is driven by the electromagnetic driving force. The proposed micromirror has two torsion beams to sustain the mirror plate which has surface coils on the top and the two permanent magnets exists on both sides of the micromirror for an external magnetic field source. The designed micromirror has the resonant frequency of 3.82kHz. When the magnetic field of the permanent magnet is 0.4T, the coil has 4 turns, and the current density of coil is 3.6A/$mm^2$, the estimated z axis displacement of the mirror plate edge is 0.23mm which corresponds to the rotation angle of $14.2^{\circ}$. When considering the joule heating in the current-carrying coil, the maximum temperature of the mirror plate is obtained as 300.045K, which induces the negligible changes in the rotation angle and the resistance of the coil.