• The Journal of Korean Physical Therapy
• /
• v.19 no.5
• /
• pp.21-28
• /
• 2007

Purpose: The aims of this study was to evaluate the effects of shoulder lateral rotation and trunk extension exercises on standing posture improvement exercises using turning round in the patients with Parkinson's disease. Methods: For twenty-one patients with Parkinson's disease, shoulder lateral rotation and trunk extension exercises were performed for a total of three sets, ten times a set, three days a week for twelve weeks. To measure turning round, ink foot-print method was used. The number of steps and time were measured every week for before and after study (twelve weeks). Results: The results are as follows: Changes in steps and time on each week during twelve weeks showed significant differences, compared with before test(p<0.05). Conclusion: Standing posture improvement exercises can help perform turning round in the patients with Parkinson's disease.

• Journal of Korean Port Research
• /
• v.8 no.1
• /
• pp.65-74
• /
• 1994

There are some turn maneuvers, such as hard Round Turn, Turning Short Round, Williamson Turn and Single Turn, of effectively returning a ship back close to the original track in case of emergency situations of man-overboard and intentional delay of port entrance time, and so forth. But the author developed the new turn maneuvers of Double 30 (woo) Turn originally by means of simulation experiments of Full-Mission Shiphandling Simulator. The conclusions of this study are as follows: 1) By comparison of existing Williamson Turn and Turning Short Round this Double 30(woo) Turn is all-weather multipurpose turn maneuvers in some respects, 2) According to simulation experiments this Double 30 (woo) Turn saved approximately 20-35% of total turning time to the original position and reduced maximum advances by 8-10% approximately in comparison to that of Williamson Turn, 3) Except for emergency men-overboard the Reverse Williamson Turn was proposed as a new reverse maneuver of returning a ship back to the original track.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.3
• /
• pp.405-413
• /
• 2001

The present study investigates convective heat/mass transfer and flow characteristics inside a rotating two-pass rectangular duct. A naphthalene sublimation technique is employed to determine the detailed local heat transfer coefficients using the heat and mass transfer analogy. The objective of this study is to determine the effects of turning geometry with rotation for 0.0$\leq$Ro$\leq$0.24. The results reveal that the sharp-turn corner has the larger pressure drop and lower heat transfer in the post-turn region than those of the round-turn corner. The strong secondary flow enhances heat transfer for the round-turn corner. Coriolis force induced by the rotation pushes the high momentum core flow toward the trailing wall in the first passage with radially outward flow and toward the leading wall in the second passage with radially inward flow. Consequently, the high heat transfer rates are generated on the trailing surface and the leading surface in the first and second passage, respectively. However, the strong secondary flow due to the turning dominates the flow pattern in the second passage, thus the heat transfer differences between the leading and trailing surfaces are small with the rotation.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.659-664
• /
• 2000

In this paper, We have discussed on the modeling of machined outer geometry which was established for the case of round shape machining, also the effects of externally machined profile are analyzed and its modeling realiability was verified by the experiments of roundness testing, especially in lathe operation. In this study, we established harmonic geometric model with the parameter harmonic function. In general, we can calculate the theoretical roundness profile with arbitrary multilobe parameter. But in real experiments, only 2-5 lobe profile was frequently measured. the most frequently ones are 3 and 5 lobe profile in experiments. With this results, we can predict that these results may be applies to round shape machining such as turning, drilling, boring, ball screw and cylindrical grinding operation in bearing and shaft making operation with the same method. In this study, simulation and experimental work were performed to show the profile behaviors. we can apply these new modeling method in real process for the prediction of part profile behaviors machined such as in round shape machining operation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.55-61
• /
• 2000

In this paper we have discussed on the characteristics and modeling of machined geometry which was established for the case of round shape machining also the effects of externally machined profile are analyzed and its modeling realia-bility was verified by the experiments of roundness testing especially in lathe operation. In this study we established a harmonic geometric model with the parameter harmonic function. In general we can calculate the theoretical roundness profile with an arbitrary multilobe parameter. But in real experiments only 2-5 lobe profile was frequently measured, The most frequently measured ones are 3 and 5 lobe profile in experiments. With these results we can predict that these results may be applied to round shape machining such as turning drilling boring ball screw and cylindrical grinding operation in bearing and shaft making operation with the same method. in this study simulation and experimental work were performed to show the profile behaviors. we can apply these new modeling methods in real process for the predic-tion of part profile behaviors machined such as in round shape machining operation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.3
• /
• pp.42-51
• /
• 1999

An experimental modeling of cutting and structural dynamics and the on-line detection of malfunction process is substantial not only for the investigation of the static and dynamic characteristics of cutting process but also for the analytic realization of diagnostic systems. In this regard, We have discussed on the comparative assessment of two recursive time series modeling algorithms that can represent the machining process and detect the abnormal machining behaviors in precision round shape machining such as turning, drilling and boring in mold and die making. In this study, simulation and experimental work were performed to show the malfunctioned behaviors. For this purpose, two new recursive approach (REIVM, RLSM) were adopted fur the on-line system identification and monitoring of a machining process, we can apply these new algorithm in real process for the detection of abnormal machining behaviors such as chipping, chatter, wear and round shape lobe waviness.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.203-208
• /
• 2002

This paper deals with turning experiments of aluminium alloy using a single crystal diamond with round cutting edge. A face cutting was conducted using a special precision machine to study the characteristic phenomena in heavy cutting of aluminium alloy. In many cases, one of the most important matter on the surface integrity is about a damaged layer remaining just under the surface after machining. A machined surface roughness can be improved at a small geometrical surface roughness under special cutting conditions, even if a steady vibration exists between a tool and a workpiece.

• Journal of Korea Multimedia Society
• /
• v.15 no.11
• /
• pp.1358-1368
• /
• 2012

A tag sequence estimation scheme is to estimate the physical sequence of passive RFID tags that are linearly spread using the movement of a RFID reader. Since RFID readers communicate with the passive tags by very weak radio waves, scanning passive tags are unstable. In this paper, we applied round-trip scanning of a reader to enhance the tag sequence estimation. Proposed scheme first determines the turning point of the reader movement, and then estimates the sequence of the tags using the tag sets scanned in each read cycles. Test experiments show that the proposed scheme can improve the estimation accuracy.

• Journal of Fashion Business
• /
• v.6 no.4
• /
• pp.32-45
• /
• 2002

The purpose of this study is, to renew understanding the aesthetic value of a ruff collar and to expand the border of creation in designing as the source of inspiration being applied to an retro style by inquiring various ruff collars re-illuminated in the present-day fashion trend. The ruff collar investigated through the above historical contemplation became the source of inspirations in the current retro trend and was variously modified in modern fashion. In the 1980s, we can find a dignified and feminine image in graceful and exquisite suits or dresses. Especially, the spanish round ruff of the 2st period appeared on works by a lot of designers. From the application by designers like John Galliano in the latter half of the 80s, we can be well aware that the meaning of decoration was newly altered. In the 1990s, the ruff collar was shown in various fashion style, but it was what was reborn as a factor of modern fashion through a liberal compromise and harmony. Various style was shown from exaggeratedly swelling one to smaller one, which were more diversely applied than that of the 80s. A Medici collar and a Queen Elizabeth collar were also displayed being fitted to a modern sense by Vivienne Westwood and Louis F raud. A ruff in the 2000s was settled as a factor of modern fashion, exposing on works of designers more often than in the 1980s and 90s. The spanish round ruff appeared on garments, while a Medici collar and a Queen Elizabeth collar went out of sight. A new form of the ruff was regenerated by extreme magnification and simplification, and several designers like Issey Miyake and Alexander Mcqueen brought forward a new way in materials and technical skills. According to this research, a ruff collar developed as a fashion factor which characterizes a certain period of time, reflecting the aesthetical sense of Renaissance and turning into various and distinct forms. Afterwards, it exerted influence on modern fashion. This is offering the source of inspiration to contemporary designers.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.2
• /
• pp.107-120
• /
• 2005

To study the development of solid waste compost to use sewage sludge and paper mill sludge for reclaiming damage soil in forest, the changes of temperature, moisture, chemical properties, heavy metals and harmful compound during the aerobic decomposition were investigated, and the compost decomposition of final products investigated the round paper chromatography method and G.I(Germination index) value. The results were summarized as follows. Temperature was changed a little during early 5days because of air temperature too low. That was rapidly increased to over $50^{\circ}C$ at 4days after first turning and then decreased gradually fallen to $40{\sim}50^{\circ}C$ at 15days after aerobic decomposition in A and C treatments. The second turning was conducted at 18 days after aerobic decomposition, and then the temperature was little changed. At the compare first with terminal product, The moisture content was decreased all treatments but the change was little in A and B treatments. pH was decreased to below 1 in all treatments. EC was increased to below 5dS/m. The content of total carbon, C/N ratio, $NH_4{^+}-N$ were decreased with 4~7%, below 8 and below 500mg/kg in all treatments, respectively. The content of total nitrogen, $NO_3{^-}-N$, CEC were increased with below 0.5%, below 173mg/kg and over $30cmol^+/kg$ in all treatments, respectively. The content of heavy metals and harmful compound were similar during aerobic decomposition and suited to standard of 가 grade in all treatments. The result of round paper chromatography method and G.I. value, The C treatment concluded well aerobic decomposition. Especially, the G.I. value in C treatment was 64.1 and 66.2 at cabbage and grass, respectively.