• 대한화학회지
• /
• 제45권2호
• /
• pp.143-148
• /
• 2001

본 연구에서는 작은 양의 시료를 분석할 수 있는 이온 크로마토그래피용 open tubular capillary 컬럼을 개발하였다. 내경이 작은 모세관 컬럼을 사용하는 경우 이동상의 유속은 보통 1~10㎕/min 정도 되고 컬럽의 길이는 1.0~5.0m 정도이다. 컬럼은 fused silica 모세관(내경 : 50㎛)과 DMEOHA latex particles를 이용하여 만들었다. 또한 이런 모세관 컬럼에 맞는 새로운 전도도 셀과 억압장치도 함께 개발하여 사용하였다. 이 모세관 컬럼을 이용하여 실제 음이온들(fluoride, nitrite, chlorate, phosphate, sulfate)을 분석한 결과재현성 있고 좋은 크로마토그램을 얻었다.

• Bulletin of the Korean Chemical Society
• /
• 제27권9호
• /
• pp.1459-1462
• /
• 2006

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1664-1668
• /
• 2012

In this study, we have expanded the applicability of the pre-established generalized preparation protocol to MIPs with a neutral template. The ($4S,5R$hyl-5-phenyl-2-oxazolidinone MIP layer was formed inside a pretreated and silanized fused silica capillary, and its chiral separation performance was examined. Optimization of chiral separation was also carried out. This is the very first report of somewhat successful application of the generalized preparation protocol to a MIP with a genuine neutral template.

• Korean Chemical Engineering Research
• /
• 제45권6호
• /
• pp.677-679
• /
• 2007

$SiCl_4$ 증기를 수증기에 의해 처음으로 2단계 가수분해시키는 방식에 의해 200~300 nm 크기의 단분산에 가까운 구형 실리카 분말을 건식으로 제조하였다. 1단계로 회분식 반응기를 사용하여 $150^{\circ}C$ 정도의 저온에서 부분 가수분해에 의해 단분산에 가까운 silicon oxychloride 구형 입자를 형성시킨 후 2단계로 관형반응기를 사용하여 $1,000^{\circ}C$에서 가수분해 반응을 완료시킴으로써 1단계 이후의 입자 형상이 거의 그대로 보존된 실리카 분말을 제조하였다.

• 분석과학
• /
• 제19권3호
• /
• pp.211-217
• /
• 2006

Diphenyl amine (DPA) was polymerized inside the channels of the mesoporous silica (MCM-41). MCM-41 (C) and MCM-41 (D) were prepared with cetyltrimethyl ammonium bromide (CTAB) and dodecyltrimethyl ammonium bromide (DTAB), respectively and used as hosts. Initially, the self assembly of DPA inside the pores of MCM-41 was made in ${\beta}$-naphthalene sulfonic acid (NSA) medium and subsequently poly (diphenylamine), PDPA was formed by oxidative polymerization. $N_2$ adsorption-desorption measurements of PDPA loaded MCM-41 (C) and MCM-41 (D) show variations in pore volume and surface area between them. A tubular form of poly (diphenylamine), PDPA was envisaged to form in the pores of MCM-41 and supported by high resolution transmission microscopy. The presence of PDPA inside the channel of MCM-41 was further confirmed by FTIR spectroscopy, thermogravimetric analysis (TGA), X-ray diffraction.

• Bulletin of the Korean Chemical Society
• /
• 제29권8호
• /
• pp.1630-1632
• /
• 2008

• Steel and Composite Structures
• /
• 제27권2호
• /
• pp.193-200
• /
• 2018

This paper presents an experimental work for short circular steel tube columns filled with normal concrete (NAC), recycled aggregate concrete (RAC), and RAC with silica fume and steel fiber. Ten specimens were tested under axial compression to research the effect of silica fume and steel fiber volume percentage on the behavior of recycled aggregate concrete-filled steel tube columns (RACFST). The failure modes, ultimate loads and axial load- strain relationships are presented. The test results indicate that silica fume and steel fiber would not change the failure mode of the RACFST column, but can increase the mechanical performances of the RACFST column because of the filling effect and pozzolanic action of silica fume and the confinement effect of steel fiber. The ultimate load, ductility and energy dissipation capacity of RACFST columns can exceed that of corresponding natural aggregate concrete-filled steel tube (NACFST) column. Design formulas EC4 for the load capacity NACFST and RACFST columns are proposed, and the predictions agree well with the experimental results from this study.

• Bulletin of the Korean Chemical Society
• /
• 제31권10호
• /
• pp.2934-2938
• /
• 2010

Some open tubular (OT) molecule imprinted polymer (MIP) silica capillary columns with templates of camphor derivatives such as 10-camphorsulfonic acid (10-CSA), 10-camphorsulfonamide (10-CS) and camphor-p-tosyl hydrazone (CTH) have been successfully prepared by the prior generalized preparation protocol. The three MIP thin layers of different templates showed quite different morphologies. The chiral selectivity of each MIP column for the template enantiomers was optimized by changing eluent composition and pH. The optimization conditions were found to be different for the three MIPs. This work suggests prospective successful extension of the generalized preparation protocol for OT-MIP silica capillary columns toward templates of a variety of chemical groups.

• Korean Membrane Journal
• /
• 제5권1호
• /
• pp.68-74
• /
• 2003

Methane steam reforming (MSR) reaction for hydrogen production was studied in a membrane reactor (MR) using two tubular membranes, one Pd-based and one of porous alumina. A higher methane conversion than the thermodynamic equilibrium for a traditional reactor (TR) was achieved using MRs. The experimental temperature range was 350-500$^{\circ}C$; no sweep-gas was employed during reaction tests to avoid its back-permeation through the membrane and the steam/methane molar feed ratio (m) varied in the range 3.5-5.9. The best results (the difference between the MR conversion and the thermodynamic equilibrium was of about 7%) were achieved with the alumina membrane, working with the highest steam/methane ratio and at 450$^{\circ}C$. Silica membranes prepared at KRICT laboratories were characterized with permeation tests on single gases (N$_2$, H$_2$ and CH$_4$). These membranes are suited for H$_2$ separation at high temperature.

• 한국광물학회지
• /
• 제5권2호
• /
• pp.93-101
• /
• 1992

경남 밀양 일대의 화산암에는 열수변질대가 상당히 넓게 발달하고 있으며, 여러 개의 점토광상이 분포한다. 납석광상은 주로 안산암질 응회암에서 배태된다. 납석광석의 주구성광물은 엽납석과 딕카이트이며, 그외에 일라이트, 토수다이트, 듀모티에라이트, 석영 등의 규산염광물들이 소량 수반되며, 디이아스포아, 황철석, 웨이브라이트 등이 산출된다. 본 지역의 엽잡석은 단지 2M 다형만 산출된다. 엽납석은 약 750${\circ}C$에서 OH가 빠져나감에 따라서 $d_{001}$ 간격이 증간한다. 할로이사이트는 튜브형태로 나타난다. 웨이브라이트는 열수변질작용 말기의 낮은 온도에서 틈을 따라 침천된 것이다. 본 지역의 5개의 변질대로 구분되는데, 주광체로부터 멀어질수록 엽납석-딕카이트대, 실리카대, 일라이트대, 할로이사이트대, 녹니석-알바이트대로 대상분포를 보인다. 점토광물은 모암으로부터 Si와 알카리이온의 용탈에 의해서 형성되었다. 광물조합과 엽납석 다형 및 기존의 열역학적 자료를 밀양광산의 형성온도는 270∼350${\circ}C$ 내외인 것으로 추정된다.