• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.437-442
• /
• 2005

The high pressure jet grouting method is mainly used in the grouting. But, this method has problems that the scale and strength of improved body is not constant with ground condition. Considering these problems, triple rod MJM that results in the high-strength effect by the technology of the injected ${\phi}7mm$ cement mortar was developed. In this MJM, the unconfined strength is estimated with the various combination ratio and engineering characteristic, strength improvement effect of improved body, was checked through the field test. It is known that the application of MJM was verified with ground and construction condition.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.3
• /
• pp.132-138
• /
• 1997

Electrical characteristics of split-gate flash EEPROM with triple polysilicon is investigated in terms of effects of floating gate and offset gate. In order to search for t the effects of offset gate on programming characteristics, threshold voltage and drain current are studied with variation of control gate voltage. The programming process is believed to depend on vertical and horizontal electric field as well as offset gate length. The erase and program threshold voltage are found to be almost constant with variation of control gate voltage above 12V, while endurance test indicates degradation of program threshold voltage. With increase of offset gate length, program threshold voltage becomes smaller and the drain source voltage just after program under constant control gate voltage becomes higher.

• Journal of Veterinary Clinics
• /
• v.19 no.3
• /
• pp.375-378
• /
• 2002

A 3-year-old intact female korean pungsan dog showing chronic intermittent vomiting and anorexia was admitted to The Veterinary Medical leaching Hospital of Seoul National University. The patient had been received antiemetics, antacids or proton pump inhibitor for these symptoms but had not been recovered yet. All results of physical examination, complete blood count, serum chemical analysis, fecal test and radiography were normal. Gastric endoscopic examination was also performed and gastritis with hemorrhage on near antrum region was detected. In PCR assay of bioptic gastric tissues for detecting Helicobacter species infection, Helicobacter heilmannii infection was confirmed. After receiving triple therapy with amoxicillin, metronidazole and omeprazole for 21 days, all symptoms were recovered and had not been occurred again. Helicobacter heilmannii also were not detected.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.3
• /
• pp.201-208
• /
• 2002

The machine tool which operates by hand is replacing by CNC machine tool to improve the quality of the product and the productivity in modem mechanic industry. The precision of machine part is influenced greatly the surface roughness by cutting condition of machine tool. So this study was performed to examine the aluminium surface roughness of section according to change of strength rating, nose radius, cutting speed, using live center. The results of this study are as follows; 1. In the case of 56mm diameter of test piece(length is below triple of diameter), whether establish the live center or not, doesn't influence to the surface roughness, and it is possible to make product without the live center. 2. The average surface roughness of 42mm diameter(length is quadruple of diameter) is similar to the 56mm diameter in the cutting condition of nose radius 0.8mm and cutting speed 140mm/min, but there are increases and differences in other cutting conditions. 3. In the case of test piece length more 70m/min(140m/mm) and nose radius improved greatly using the live center. 4. In the case of test piece length is quintuple of diameter, the nose radius must choose big tool and increase the cutting speed in preference live center establishment availability to improve that is surface roughness. Conclusively, if aluminum test piece length is fewer than triple of diameter, can process without establishing live center. If aluminum test piece length is more than quintuple of diameter, cutting conditions to improve surface roughness are (1) cutting speed (2) nose radius (3) whether the live center uses or not.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.2
• /
• pp.115-123
• /
• 2022

Purpose : The hamstring is a group of three muscles, biceps femoris, semitendinosus, and semimembranosus, placed behind the thigh. The hamstring is one of the most commonly injured muscles and usually occurs during high-speed, high-intensity exercise. The purpose of this study was to investigate the effect of static stretching and eccentric exercise of hamstrings on flexibility, strength, and functional performance. Methods : This study was conducted on 28 healthy adults. Subjects were divided into a static stretching group (n=15) and an eccentric exercise group (n=13). Subjects measured hamstring flexibility (active knee extension test), hamstring strength (concentric and eccentric peak torque), and functional performance (triple hop for distance and modified 20 m sprint). The intervention was conducted three times a week for six weeks. To compare the difference between values before and after the intervention, paired t-test was used, and an independent t-test was used to compare between groups. Results : In both groups, the active knee extension test, concentric peak torque, triple hop test, and 20 m sprint significantly increased after the intervention compared to before the intervention (p<.05). However, no significant difference was found in eccentric peak torque after intervention in both groups (p>.05). No significant difference was found between the two groups in the effect on the variables (p>.05). Conclusion : Both interventions were found to be effective for flexibility, concentric strength, and functional performance. Eccentric exercise and static stretching are recommended to improve the flexibility and functional performance of the hamstring. This study's results will be considered essential data on the effectiveness of static stretching and eccentric exercise.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.3
• /
• pp.95-102
• /
• 2018

As a recent technical approach, a high-speed planing hull was tried to realize a friction reducing system by simultaneously actuating the triple streamlined step hull form in association with optimum speed of 35 knot planing for fishing boat. In this approach, the streamlined step hull form with triple structure of type was attached under the bottom of high-speed planing hull, while a friction resistance is reduced in the process of running at the speed of 35 knot. In addition, this research was to make a performance test as to the manufactured product and acquire the purposed values and the development items. Actually, after manufacturing the desired prototype of high-speed planing hull, the significant items, fuel efficiency (second) and amount of fuel consumption (degree) including maximum speed (knot) were estimated for a performance test. And tensile strength (MPa) and bend strength (MPa) as to the completed prototype like a high speed planing hull were also acquired during the test.

• Korean Journal of Veterinary Service
• /
• v.21 no.2
• /
• pp.107-115
• /
• 1998

In order to establish a rapid, sensitive and specific diagnostic method for detection of antibody to Brucella abortus, a enzyme-linked immunosorbent assay(ELISA) was adapted. The diagnostic efficacy of the established ELISA was compared with that of the standard tube agglutination test for B abortus. 1. It was found that the optimal concentration of antigen for this ELISA was 5$\mu\textrm{g}$/ml, the optimal dilution of conjugate was 1 : 2000, and the optimal dilution of serum was 1 : 200, respectively. 2. Cut off value in this ELISA was 1,102 that was determined by mean absorbance(at 492nm) of tube agglutination test negative serum added with the triple value of the standared devation. 3. The relationship between the tube agglutination test and ELISA was showen high corresponding rate with sensitivity(96.3%) and specificity(98.1%). 4. The efficacy of the ELISA for detection of B abortus antibody was compared with tube agglutination test In brucellosis outbreak farm. The sensivity of ELSIA was higher than tube agglutination test.

• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.1
• /
• pp.20-23
• /
• 2000

A general solution for determining the storage coefficient from multi-step pumping test recovery data is suggested. This solution is essentially based on the method of Banton and Bangoy (1996), which used single-step pumping test recovery data. The suggested solution can be applied to any-step pumping test recovery data. We have demonstrated the applicability of the general solution to single-, double-, and triple-step pumping and/or step-drawdown test data partially described in Lee and Lee (1999). The estimates of storage coefficient as well as transmissivity are well consistent with the values from other methods for pumping phase data.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.63-67
• /
• 2009

In this paper we propose a QoS policy, which is based on both DSCP and SPQ, appropriate to TPS users on optical subscriber network. Then we experiment and evaluate QoS policy through the test bed which emulates real optical subscriber network. In order to perform effective and real experiment on test bed we make test traffic equivalent to 400 TPS users and give it to test bed. The experimental result shows that no packet loss in real time service traffic such as voice, IPTV occurs during more than 4 hours. We think that our proposed QoS policy is a proper method which guarantees the service quality of real time services on optical subscriber network.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.8
• /
• pp.59-66
• /
• 2009

Recently, as the expectation about the IPTV (Internet Protocol TV) service quality is rapidly increased by the development of the national high-speed internet and TPS (the Triple Play Service : data + image + audio) service Therefore, the enactment of the national quality standards about the IPTV service quality guaranteeing the real time video quality of a subscriber and the international standards are hastily needed. This paper built a test bed with the network domain and the subscriber set-top box domain including the headend area and commercial network characteristic in order to test in the environment which is similar to the characteristic of the service business network. And by using the constructed environment, the characteristics required for SLA(service Level Agreement) of the IPTV service are presented as the quality test according to the service environment change.