• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.6
• /
• pp.546-551
• /
• 2002

In this paper, a triple controlled type DDFS-driven PLL frequency synthesizer with reduced complexity is used to show its applications for broadband wireless communication systems by frequency synthesis control. Since the proposed DDFS-driven PLL synthesizer is very simplified to use only phase accumulator in DDFS, it improves the switching speed and power consumption than the conventional DDFS-driven PLL frequency synthesizer. It is appropriate for applications with requirements of broadband, low-power consumption and high switching speed, since the proposed synthesizer can cover a wide range of frequency bands by the triple frequency control parameters. Method and results of frequency control parameters assignment are shown for the several frequency bands applications such as GSM, IMT-2000, Bluetooth and PCS system.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.589-590
• /
• 2006

A novel Triple-Well P-type Triggered Silicon Controlled Rectifier (TWPTSCR) for on-chip ESD protection implemented with a triple-well CMOS technology is presented. Unlike conventional SCR devices, the proposed TWPTSCR offers a reduced triggering voltage level as well as the enhanced ESD performance of the SCR devices. From the experimental results, the TWPTSCR with a device width of 20um has the triggering voltage of 1.1V.

• Journal of Biosystems Engineering
• /
• v.41 no.1
• /
• pp.12-20
• /
• 2016

Purpose: Pepper prices have risen continuously because of a decrease in cultivation area; therefore, mechanical harvesting systems for peppers should be developed to reduce cost, time, and labor during harvest. In this study, a screw type picking head for a self-propelled pepper harvester was developed, and the optimal working conditions were evaluated considering helix types, winding directions of helix, and rotational speeds of the helix. Methods: The screw type was selected for the picking head after analyzing previous studies, and the device consisted of helices and a feed chain mechanism for conveying pepper branches. A double helix and a triple helix were manufactured, and rotational speeds of 200, 300, and 400 rpm were tested. The device was controlled by a variable speed (VS) motor and an inverter. Both the forward and reverse directions were tested for the winding and rotating directions of the helix. An experiment crop (cultivar: Longgreenmat) was cultivated in a plastic greenhouse. The test results were analyzed using the SAS program with ANOVA to examine the relationship between each factor and the performance of the picking head. Results: The results of the double and triple helix tests in the reverse direction showed gross harvest efficiency levels of 60-95%, mechanical damage rates of 8-20%, and net marketable portion rates of 50-80%. The dividing ratio was highest at a rotational speed of 400 rpm. Gross harvest efficiency was influenced by the types of helix and rotational speed. Net marketable portion was influenced by rotational speed but not influenced by the type of helix. Mechanical damage was not influenced by the type of helix or rotational speed. Conclusions: Best gross harvest efficiency was obtained at a rotational speed of 400 rpm; however, operating the device at that speed resulted in vibration, which should be reduced.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.147-148
• /
• 1998

In this paper, we developed the process for depth-probe type silicon microelectrode arrays. The process consists of four mask steps only. The steps are for defining sites, windows, and for shaping probe using plasma etch from above, and for shaping using wet etch from below, respectively. The probe thickness is controlled by dry etching, not by impurity diffusion. We used gold electrodes with a triple dielectric system consisting of oxide/nitride/oxide. The shank of the probe taper from 200um to tens of urn tip and has 30 um thickness.

• Journal of ILASS-Korea
• /
• v.18 no.4
• /
• pp.176-181
• /
• 2013

In this study, injection quantity, rate and spray image of multiple injections which are important design parameters for a piezo type injector have been investigated. Interval of injections and a number of injections in multiple injection strategy has been controlled to verify interaction of each injection. Spray characteristics of multiple injections have been researched through optical process with a high speed camera in a high pressure chamber. In addition, a method of RMS(Root Mean Square) process has been used for comprehending the distribution of injection easily. As a result, in case of piezo type injector, characteristics of injection quantity according to charging voltage and the difference of injection quantity between single and triple injection were confirmed. Also, injection rate for increasing injection duration was confirmed. And spray characteristics of multiple injections were improved; multiple injections were possible in a shorter time interval between each injection. With this study, a possibilities of more accurate multiple injection control would be expected.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.3
• /
• pp.29-34
• /
• 2008

A large diameter sampler was developed to take undisturbed samples from not only soft ground but also sandy and weathered ground. The large diameter sampler which was developed in Korea Institute of Construction Technology(KICT-type large diameter sampler) was manufactured based on the principle of triple core barrel sampling. A specially designed cutting device was used to cut and contain various kinds of samples in the sampler during a sampling and retrieval procedure. By adjusting the stiffness of the spring located at the top of the sampler, the distance between the cutting shoe and auger can be controlled in accordance with the ground condition. In order to investigate the applicability of the developed sampler and compare the quality of the samples taken by the sampler with that by the traditional thin-walled tube sampler, samples were taken at various sites according to the ground condition. And a series of laboratory tests such as the unconfined compress ion test, triaxial compression test, oedometer test, large diameter Rowe cell consolidation test (D: 150 mm) were performed. The test results showed that the samples by the KICT-type large diameter sampler show higher quality than the samples by the thin-walled tube sampler. And the validity and applicability of the developed KICT-type large diameter sampler was confirmed accordingly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.243-253
• /
• 2018

This study aimed to investigate the effects of DCI on glucose control, quality of life(SF-36 Version 2.0, Korean) and SDSCA(Summary of Diabetes Self-Care Activities) in patients with type 2 diabetes mellitus. A randomized, double-blind, placebo-controlled study was performed on 46 patients with HbA1c 7.0% taking triple anti-diabetic drug regimen who visited the department of Endocrinology and Metabolism in Chungnam National University Hospital between March 2015 and May 2016. As a result, DCI treatment in the intervention group resulted in significantly reduced HbA1c levels $8.75{\pm}0.79%$(baseline), $8.36{\pm}1.03%$(after 12weeks), and $8.65{\pm}0.81%$(after 24weeks). However, patients in the control group did not show any significant change. Interestingly, both DCI treatment group and the control group significantly showed improvements in SDSCA. Participants in the intervention group showed a small yet significant improvement in their only fasting blood glucose test in SDSCA and revealed significant increase in the quantitative levels of quality of life, from $73.05{\pm}16.85$ to $82.74{\pm}10.68$. By using pathway analysis, improvement of SDSCA scores(${\beta}=-0.505$, t=-2.743) was the most influential factor to the fasting blood glucose. The quality of life of patients with type 2 diabetes mellitus was affected by changes of SDSCA scores(${\beta}=0.411$, t=2.024) and fasting c-peptide(${\beta}=-0.445$, t=-2.668) in DCI treatment group. In conclusion, treatment of DCI effectively improved glucose control in patients with type 2 DM(HbA1c level>7.0%) after 12 weeks of treatment, although it had no impact on glucose control after 24 weeks of treatment. Improved glucose control may encourage diabetic patients to conduct self-care activities and improve the quality of life. Based on the present study, we suggest that diabetes self-management, as well as consideration of comprehensive laboratory findings, may be important factor in regulating the quality of life in type 2 DM patients.