• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.228.2-228.2
• /
• 2016

The triggered vacuum switch (TVS) discharges high current through two processes. In the first process, an igniting plasma is generated at a trigger system, and the next process that a main discharge is taken place sequentially at a six-gap rod electrode within a few microsecond. In general, a triggered voltage producing the igniting plasma is increased. However, after several hundred shots, it goes down and stable, in our experiment the trigger voltage is about 5 kV after 250 shots. This triggered characteristics comes from the ceramic insulator which is covered by an electrode material, therefore we have focused on the first igniting plasma process. The igniting plasma has been generated at the surface of a ceramic insulator under a strong electric field. The electric field can be increased through modifying geometries of trigger components which compose of a trigger pin, a ceramic insulator and an enclosed holder. We fabricated not only two types of trigger pin which are a plane head and an umbrella head type, but two different holders which are a concave and a convex type. In this paper the result that the dependency of geometries for these four combined types is included, but the study of the ceramic insulator is not. The research of the ceramic insulator will be announced in the other paper.

• 대한전자공학회논문지
• /
• 제18권5호
• /
• pp.10-14
• /
• 1981

This paper deals with design of circuit that gives a linear relationship between the voltage controlling the Phase delay an인e of thrysistor trigger pulse and the average voltage in the load. The design is based an the method of linear triggering of thrysistion. It is shown that method is also effective with the input signal how variable frequencies.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권7호
• /
• pp.359-364
• /
• 2000

This paper is introducing a newly developed spark-gap switch with dual trigger system, into which the current from the voltage source is injected along with the test sequence during the synthetic testing of high voltage circuit-breaker. The currently-used spark gap switch is narrow in operating range due to the use of the method of triggering energy being injected by single way. As a result, the frequent happening of misoperation has greatly reduced the test quality and test efficiency and has required the cost of maintenance excessively. In this study, accordingly, in order to basically remove these problems, another triggering system is installed to the opposite direction on the existing triggering system; attaching the same time and the same rising time of pulse wave as on the existing system, so that at a comparatively trigger gap distance from the main electrode(the gap can be operated at 60% of self-break voltage, while at 80% in the current system), the main electrode has been enabled to be closed by the development of spark gap switch with dual trigger system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.138-139
• /
• 2017

This paper describes the design and implementation of a trigger circuit which can be series connected with main pulse circuit for a xenon flash lamp driver. For generating high voltage, the trigger circuit is designed as an inductive energy storage pulsed power modulator with 2 state step-up circuit consisting of a boost converter and a flyback circuit. In order to guarantee pulse width, a resonant capacitor on the output side of the flyback circuit is designed. This capacitor limits the output voltage to protect the flyback switch. In addition, to protect another power supply of xenon flash lamp driver from trigger pulse, the high voltage transformer which can carry the full current of main pulse is designed. To verify the proposed design, the trigger circuit is developed with the specification of maximum 23 kV, 0.6 J/pulse output and tested with a xenon flash lamp driver consisting of a main pulse circuit and a simmer circuit.

• 대한전자공학회논문지SD
• /
• 제40권4호
• /
• pp.42-50
• /
• 2003

본 논문에서는 시스템의 클럭을 안정적으로 공급하는 집적화 한 내장형 RC oscillator의 구현에 관한 논문이다. 기존의 RC oscillator는 온도에 따라 주파수변화가 약 15%정도 변화가 있는데 이는 온도에 따른 저항값의 변화와 schmit trigger의 기준전압이 온도에 따라 변화하기 때문이다. 본 연구에서는 온도에 따른 주파수 변화를 최소화하는 방법으로 CMOS bandgap과 온도에 따른 전류의 변화를 이용하였다. CMOS bandgap으로 기준 전압을 얻고 온도에 따라 증가하는 전류원과 온도에 따라 감소 하는 전류원을 서로 합하면 온도에 따라 일정한 전류를 얻어 주파수의 변화를 약 3%이내로 유지하는 회로를 제안한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1816-1818
• /
• 1997

A triggered sparkp gap switch was fabricater and its high-voltage discharge characteristics were studied. The switch is composed of two main electrodes and one trigger electrode which is placed perpendicular to the main one. Spark gap distance was fixed by 25 mm. This device has been operated without self firing at the pulse repetition frequency from 1 to 20 Hz limited by the charging current, and the hold-off voltage from 10 to 30kV. An IGBT switch and igniter coil (originally used in a car) were adopted for a trigger circuit. In this article preliminary switch characteristics of the spark gap switch are reported with the emphasis on the description of the trigger circuit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1333-1335
• /
• 2000

In order to turn on the SCR gate, trigger signal source have to provide appropriate gate current and voltage under the gate rating based on the characteristic of SCR, the nature of load and power. It will be essential design factors such as trigger source impedance, trigger signal occurring, signal time width and turn off conditions. Also minimum gate trigger current is changed with the deterioration of SCR. SCR, which is needed large gate trigger current absolutely, is very important for SCR characteristic test because it causes unstable output in the misfile or makes a trouble to pulse trigger circuits. This paper shows scheme to test the performance of SCR with the precision analyzing mechanism and the changing trend of minimum gate current under the trigger conditions.

• 한국전자파학회논문지
• /
• 제27권10호
• /
• pp.917-925
• /
• 2016

슈미트 트리거 로직(Schmitt Trigger Logic)은 디지털 회로의 노이즈에 대한 내성을 향상시키기 위해 히스테리시스 특성을 보이는 게이트를 제안한 설계 방법이다. 슈미트 트리거 특성을 보이는 설계 방법 중 최근에 제안된 substrate bias를 조정하여 구현하는 Dynamic Threshold voltage MOS(DTMOS) 방법을 사용할 경우, 게이트 수를 늘이지 않고 내성을 향상 시킬 수 있는 설계방법이나, 범용 CMOS 공정에서 구현하여 시뮬레이션으로 예상하는 성능을 얻을 수 있는지는 검증되지 않았다. 본 연구에서는 $0.18{\mu}m$ CMOS 공정에서 DTMOS 설계 방법을 구현하여 히스테리시스 특성을 측정하여 검증하였다. DTMOS 슈미트 트리거 버퍼, 인버터, 낸드, 노어 게이트 및 간단한 디지털 로직 회로를 제작하였으며, 히스테리시스 특성, 전력 소모, 딜레이 등의 특성들을 관찰하고, 일반적인 CMOS 게이트로 구현된 회로와 비교하였다. 노이즈에 대한 내성이 향상되는 것을 Direct Power Injection(DPI) 실험을 통해 확인하였다. 본 논문을 통해 제작된 DTMOS 슈미트 트리거 로직은 10 M~1 GHz 영역에서 전자파 내성이 향상된 것을 확인할 수 있었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.51-53
• /
• 2018

This paper describes the design and implementation of a circuit consisting of a simmer power supply unit and a series trigger unit that can be applicable to xenon lamp driving. An LCC resonant converter based on the continuous conduction mode (CCM) is applied to the simmer circuit and by using the current output control it is possible to maintain the ionization of the lamp which has the negative resistance load characteristic. At the same time, in order to generate a high voltage, a series trigger circuit which has a number of capacitors and diodes is designed. The generated high trigger output voltage could ionize the xenon gas. This paper explains the configuration and features of the integrated circuit system, and verifies the proposed design and stable operation of the xenon lamp. The experimental and simulation results show the not only rationality but also stability of the proposed circuit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1145-1148
• /
• 1999

This paper is introducing a newly developed spark gap switch with dual trigger system, into which the current from the voltage source is injected along wi th the test sequence during the synthetic testing of high voltage circuit-breaker.