• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.3
• /
• pp.1-8
• /
• 1996

This paper proposes a novel transversal filter and an optimal LMS algorithm, and show how these can be realized as an adaptive equalizer. The transversal filter consists of a walsh and block pulse functions. in the LMS algorithm with equalizers, the convergence factor is an improtant design parameter because it governs stability and convergence speed. The conventional adaptation techniques use a fixed time constant convergence factor by the trial and error method. In this paper, an optimal method in the choice of the convergence factor is proposed. The proposed algorithm is obtrained that is tailored for each filter tap and is updated at each iteration. The performance of the proposed algorithm is compared iwth those of the conventional TDL and DFT equalizers by computer simulations.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.1
• /
• pp.67-79
• /
• 1992

For effective on-line ARMA parameter estimation, a covariance type ARMA fast transversal filter (FTF) algorithm is presented. The proposed algorithm is a covariance type implementation of ELS(Extended Least Squares) estimator and it is a fast time update recursion which is based on the fact that the correlation matrix of ARMA model satisfies the shift invariance property in each sub-block. The geometric approach is used in the derivation of the proposed algorithm. It takes small computational burden of 13N+37 MADPR(Multiplication And Division Per Recursion). Also, AR and MA orders can be independetly and arbitrarily specified.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.105-111
• /
• 2000

To realize a desired characteristics of an optical transversal fitters, The number of optical amplifiers as same as the lentgh of a given transfer function is needed In this paper, we consider an optical transversal filter that uses only one fiber amplifier, which can realize a constant(=$\alpha$) times of a given transfer function with e as large as possible in order to make use of optical signal energy. We also present some applications using this optical fiber filter.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.3
• /
• pp.25-34
• /
• 1981

Aluminum anodization method has been investigated for fabricating charge coupled device(CCD) with two-level aluminum gate structure. Al2O3 films were formed to a thickness of 400-500A, by anodizing aluminum with 30-35V of anode voltage for 2 hours using 2 % ammonium tartrate solution as an electrolyte. Breakdown voltage of these films were about 30 volts. Using above mentioned Al2O3 film as an insulator between two aluminum electrodes, CCD transversal low pass filter has been fabricated. CCD transversal low pass filter with 17 tap coefficients has shown 22 dB stop-band attenuation. The operating clock frequency range of the fabricated device was from 3 KHz to 100 KHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.120-127
• /
• 2005

The design method of the transversal filter using continuously cascaded directional couplers is presented. The coupler can be treated for a continuously varying nonuniform coupled transmission line. The design method is based on the optimum extraction of desired coupling factor by the control of null positions which are inherent to the coupling spectra pattern. In the optimization process, the improved Woodward-Lawson sampling method is applied to easily synthesize the distributed delay and weighting elements for transversal filter properties. For application, the microstrip transversal filter is fabricated and optimum dielectric overlay is introduced for the mode phase velocity compensation for non-TEM coupler nodes by using SDA(Spectral Domain Approach). Experiment results confirm the validity of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1189-1191
• /
• 2005

This paper introduces the least-squares order-recursive lattice (LSORL) Laguerre smoother that has order-recursive smoothing structure based on the Laguerre signal representation. The LSORL Laguerre smoother gives excellent performance for a channel equalization problem with smaller order of tap-weights than its counterpart algorithm based on the transversal filter structure. Simulation results show that the LSORL Laguerre smoother gives better performance than the LSORL transversal smoother.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.3
• /
• pp.224-229
• /
• 2009

In this paper, an efficient signal interference control technique to improve the convergence speed of Adaptive transversal filter with LMS algorithm is introduced. The convergence characteristics of the proposed algorithm, whose coefficients are multiply adapted in a symbol time period by recycling the received data, are analyzed to prove theoretically the improvement of convergence speed. According as the step-size parameter ${\mu}$ is increased, the rate of convergence of the algorithm is controlled. Increasing the eigenvalue spread has the effect of controlling down the rate of convergence of the adaptive equalizer and also increasing the steady-state value of the average squared error and also demonstrate the superiority of signal interference control to the filter algorithm increasing convergence speed by (B+1) times due to the data-recycling LMS Algorithms.

• ETRI Journal
• /
• v.43 no.1
• /
• pp.133-140
• /
• 2021

Herein, we present a compact transversal bandpass filter (BPF) with an extremely wide upper stopband and multiple transmission zeros (TZ). Three signal transmission paths with shorted stubs and open-coupled lines allow signal transmission from input port to output port. Two resonant modes can be excited simultaneously and managed easily for bandpass response. Eleven TZs are achieved via transmission path cancelation; an extremely wide upper stopband with an attenuation level better than -12 dB is achieved up to 11.7 f0, where f0 is the center frequency (CF). In addition, bandwidth and CF can be controlled by adjusting electrical lengths. For proof of concept, a wideband BPF centered at 1.04 GHz with 3 dB fractional bandwidths of 49.2% was designed, fabricated, and evaluated. The overall circuit measures 0.045λg × 0.117λg; good agreement was observed between the measured and simulated results.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.1-9
• /
• 1989

In binary digital transmission system the band-limiting is required for the better transmission efficiency. But in the case of band-limiting the intersymbol-interference (ISI) usually takes place. In this paper, in an attempt to design band-limiting filter which has minimum ISI and maximum stop-band loss, first, making use of analog filter by combining Binary Transversal Filter (BTF) and analog filter (4th Butterworhfilter), we found the value that minimizes ISI phenomenon by getting step response of rectangular pulse resulting from BTF in time domain. Second, we found filter characteristic we want to in frequency domain for band-limiting and minimized the error. And then we obtained resistor value (Tap coefficient) in order to design algorithm for optimum filter. Also we showed the example of simulation in case we established the resistors with 3,5 and 7 respectively. With 7 resistors set, we identified that the ripple of about minus 30dB was taken place.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6A
• /
• pp.627-633
• /
• 2006

In spite of many advantages of Meteor Burst Communications(MBC) on its transmission channel, the fact that its duty rate is less than 10 percents is a considerable deficiency of MBC. To overcome with this deficiency without paying large cost, we use a direct sequence(DS) simple reception system. This method doesn't need to add the components for acquisition or tracking the signal so that it keeps the cost efficiency of the MBC. But it has a disadvantage that its duty rate shows a large decline by noise. For this problem we adopt the proposed system applying a transversal filter circuit. The improvement by this method is more significant when the received signal is weak Simulation results show as t1 is 100ms, then the burst length would be increased by 35% when the initial value of the received signal power increases by 3 dB, t2 is 135ms. If the power increases by 6dB the burst length would be 170ms thus increased by 70%, which shows a great enhancement. Suppose now that t1 is 50ms and the power is increased by 3dB, then t2 would be increased by 70% to 85ms, and increasing the power by 6dB it would be increased by 130% to 115ms.