• 한국ITS학회 논문지
• /
• 제8권1호
• /
• pp.119-126
• /
• 2009

최근 개개인의 취향이나 특성을 고려하여 자동으로 사용자에게 정보를 찾아주거나 추천해주는 추천 서비스 시스템이 많이 개발되고 있다. 하지만 사용자의 상황에 따른 선호도를 고려하지 않을 경우 정확한 추천이 힘든 단점이 있다. 따라서 본 논문에서는 사용자의 상황에 따른 선호도를 고려하여 정확한 추천을 할 수 있는 필터링 방법을 제안하였다. 이를 위해 상황에 따른 사용자 선호도를 구하고 피어슨 상관계수를 이용하여 사용자의 상황별 오브젝트 선호도를 구하였다. 실험 결과, 기존의 서비스 시스템들과 비교하여 precision은 11%, 2%, recall은 8%, 4% 향상되었으며, 전체적으로 precision은 77%, recall은 53%로 나타났다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제6권4호
• /
• pp.5-8
• /
• 2004

A low cost MOD processing using YBCO oxide powder as a starting precursor was employed for fabrication of YBCO thin films. YBCO oxide is advantageous over metal acetates or TFA salts which are popular starting precursors for conventional MOD-TFA process. YBCO thin films were prepared by oxide-precursor-based MOD process and annealing condition was optimized. The YBCO thin film annealed at 78$0^{\circ}C$ shows no transport $I_c$ and poor microstructure. However, the YBCO thin film annealed at higher temperature shows improvement in microstructure and current transport property. In order to improve critical current, YBCO thin film was prepared by double coating method. YBCO thin film prepared with double coating approach shows enhanced superconducting performance ($I_c$>100A/cm-w).

• 태양에너지
• /
• 제18권3호
• /
• pp.63-69
• /
• 1998

일반적으로 건물 단열재는 건조된 것이 사용되며 이 상태에서 열전도율을 측정하여 열 손실을 산정할 때 기초자료로 이용될 수 있다. 그러나 이러한 단열재가 흡습성 재료인 경우에는 습도평형 혹은 다른 작용에 의해 습도가 높아지기에 이에 따라 열전도율도 상승하게된다. 이처럼 재료 열전도율의 상승효과는 건축물에 흡습성 재료가 사용될 경우 그 사이에 비흡습성 단열재료가 시공됐을 때도 양쪽재료의 흡습성으로 인하여 단열재의 열전도율이 상승하게 되며 이에 따른 열손실 또한 높아진다. 본 논문에서는 이러한 열전도율의 상승을 간단하게 계획단계에서 적용할 수 있도록 실측에 의해 검증된 약산식을 통해 산출될 수 있도록 하였다.

• Advances in nano research
• /
• 제10권4호
• /
• pp.339-347
• /
• 2021

In the framework of the density functional theory combined with the method of non-equilibrium Green functions (DFT + NEGF), the electric transport properties of a one-dimensional nanodevice consisting of telescoping polyprismanes with various types of electrical conductivity were studied. Its transmission spectra, density of state, current-voltage characteristic, and differential conductivity are determined. It was shown that C_[14,17], C_[14,11], C_[14,16], C_[14,10] show a metallic nature, and polyprismanes C_[14,5], C_[14,4] possess semiconductor properties and has a band gap of 0.4 eV and 0.6 eV, respectively. It was found that, when metal C_[14,11], C_[14,10] and semiconductor C_[14,5], C_[14,4] polyprismanes are coaxially connected, a Schottky barrier is formed and a weak diode effect is observed, i.e., manifested valve (rectifying) property of telescoping polyprismanes. The enhancement of this effect occurs in the nanodevices C_[14,17] - C_[14,11] - C_[14,5] and C_[14,16] - C_[14,10] - C_[14,4], which have the properties of nanodiode and back nanodiode, respectively. The simulation results can be useful in creating promising active one-dimensional elements of nanoelectronics.

• Advances in nano research
• /
• 제10권5호
• /
• pp.471-479
• /
• 2021

In the framework of the density functional theory combined with the method of non-equilibrium Green functions (DFT + NEGF), the electric transport properties of a one-dimensional nanodevice consisting of telescoping polyprismanes with various types of electrical conductivity were studied. Its transmission spectra, density of state, current-voltage characteristic, and differential conductivity are determined. It was shown that C_[14,17], C_[14,11], C_[14,16], C_[14,10] show a metallic nature, and polyprismanes C_[14,5], C_[14,4] possess semiconductor properties and has a band gap of 0.4 eV and 0.6 eV, respectively. It was found that, when metal C_[14,11], C_[14,10] and semiconductor C_[14,5], C_[14,4] polyprismanes are coaxially connected, a Schottky barrier is formed and a weak diode effect is observed, i.e., manifested valve (rectifying) property of telescoping polyprismanes. The enhancement of this effect occurs in the nanodevices C_[14,17] - C_[14,11] - C_[14,5] and C_[14,16] - C_[14,10] - C_[14,4], which have the properties of nanodiode and back nanodiode, respectively. The simulation results can be useful in creating promising active one-dimensional elements of nanoelectronics.

• Korean Chemical Engineering Research
• /
• 제45권6호
• /
• pp.619-626
• /
• 2007

막을 이용한 분리 공정은 상(phase) 변화가 없고 낮은 에너지 소비, 장치의 간소화, 큰 선택성, 가공의 용이성, 낮은투자 및 운용비용 등 여러 가지 장점으로 인하여 다른 방법들에 비해 분리가 간단하다는 장점 때문에 여러 분야에서 광범위하게 응용되고 있다. 여러 가지 기체 분리 방법 중 막을 이용한 기체 분리는 막 층 내에서의 기체 분자의 투과성의 차이를 이용하여 기체 분리를 할 수 있다. 이러한 기체 투과 특성을 예측하기 위해서 본 연구에서는 PDMS, ${\gamma}-radiated$ PDMS, PTFE, PTFE-X 기체 분리막을 선택하였다. 네 가지 분리막의 기체 투과 실험의 결과를 이용하여 열역학적으로 고찰, 분석 후 실험데이터의 reduction 및 regression을 통하여 온도, 압력등의 외부 조건과 기체 분자의 열역학적 특성값에 따른 기체 투과특성 예측식을 개발하였다. 이렇게 개발된 예측식으로 구한 값과 실험데이터를 비교하여 객관적 신뢰성을 확인하였다. 이로 인하여 분리막이 분리 조건과 각각의 기체의 열역학적 특성값($\sigma$, $\varepsilon/k$)으로 기체 투과특성을 알 수 있으므로 예측식을 여러 분야에서 활용할 수 있다 하겠다.

• 항공우주정책ㆍ법학회지
• /
• 제27권1호
• /
• pp.75-101
• /
• 2012

As the Reublic of Korea revised the Commercial Code including 40 articles of air transport enacted newly on May 23, 2011, so Korea became first legislative examples in the Commercial Code of the developed and developing countries. I would like to explain briefly the main contents of my paper such as (1) history of enacting newly Part VI (air transport) in the Korea's revised commercial law, (2) legal background enacting newly Part VI (air transport) in the Korea's revised commercial law and the problems on the conditions of air transport, (3) every countries' legislative examples on the civil liability of aircraft's operator, (4) unlawful Interference Convention and general risk convention of 2009, (5) main contents and prospects of the revised Commercial Code for the liability of aircraft's operator etc as the followings. Meanwhile as the Aviation Act, Commercial Code and Civil Code in Korea and Japan did not regulated at all the legal basis of solution on the disputes between victims and offender for the amount of compensation for damage due to personal or property damage caused by aircraft accidents in Korea and Japan, so it has been raised many legal problems such as protection of victims, standard of decision in trial in the event of aircraft accident's lawsuit case. But the Korean Revised Commercial Code including Part VI, air transport regulations was passed by the majority resolution of the Korean National Assembly on April 29, 2011 and then the South Korean government proclaimed it on May 23 same year. The Revised Commercial Code enforced into tothe territory of the South Korea from November 24, 2011 after six month of the proclaimed date by the Korean Government. Thus, though Korean Commercial Code regulated concretely and respectively the legal relations on the liability of compensation for damage in the contract of transport by land in it's Part II (commercial activities) and in the contract of transport by sea in its Part V (marine commerce), but the Amended Commercial Act regulated newly 40 articles in it's Part VI (air transport) relating to the air carrier's contract liability on the compensation for damage caused by aircraft accidents in the air passengers and goods transport and aircraft operator's tort liability on compensation for damage caused by the sudden falling or collision of aircraft to third parties on the surface and so it was equipped with reasonable and unified system among the transport by land, marine and air. The ICAO adopted two new air law conventions setting out international compensation and liability rules for damage caused by aircraft to third parties at a diplomatic conference hosted by it from April 20 to May 2, 2009. The fight against the effects of terrorism and the improvement of the status of victims in the event of damage to third parties that may result either from acts of unlawful interference involving aircraft or caused by ordinary operation of aircraft, forms the cornerstone of the two conventions. One legal instrument adopted by the Conference is "the Convention on Compensation for Damage to Third Parties, Resulting from Acts of Unlawful Interference Involving Aircraft" (Unlawful Interference Convention). The other instrument, "the Convention on Compensation for Damage Caused by Aircraft to Third Parties" (General Risk Convention), modernizes the current legal framework provided for under the 1952 Rome Convention and related Protocol of 1978. It is desirable for us to ratify quickly the abovementioned two conventions such as Unlawful Interference Convention and General Risk Convention in order to settle reasonably and justly as well as the protection of the South Korean peoples.

• 한국재료학회지
• /
• 제7권2호
• /
• pp.140-144
• /
• 1997

은 튜브에 장입되기 전의 초기 분말의 입자 크기가 Ag/Bi-2223초전도 선재의 미세구조와 상전이, 임계 전류 밀도등에 미치는 영향에 대해 고찰하였다. 분말의 입자 크기는 하소 분말을 볼밀을 이용하여 0-48 시간 동안 분쇄하여 조절하였다. 열처리 후 최종 초전도 선재의 전기적 성질은 초기 분말의 입자 크기에 영향을 받는 것으로 나타났으며 분말의 분쇄에 의한 반응성의 증가에 의해 열처리시 2223 상으로의 상전이가 빠르게 일어났고 이차상의 크기와 분율이 감소된 미세구조를 얻을 수 있었다. 그러나 과다한 분쇄에 의한 반응성의 증가에 의해 열처리시 2223상으로의 상전이가 빠르게 일어났고 이차상의 크기와 분율이 감소된 미세구조를 얻을 수 있었다. 그러나 과다한 분쇄는 분말의 비정질화를 유발하여 2223 상으로의 전이를 방해함으로써 선재의 임계 전류 밀도를 감소시키는 결과를 나타내었다.

• 한국의류학회지
• /
• 제41권1호
• /
• pp.28-42
• /
• 2017

Moisture transfer characteristics of high emotional garments are important to evaluate wear comfort. Wicking and drying measurement methods are also critical for perspiration absorption and quick dry fabric made of high functional fibers. In this study, the wicking and drying properties of high emotional fabrics made from hybrid composite yarns using CoolMax, Tencel, Bamboo staple fibers and PP. PET CoolMax filaments were also measured and analyzed according to various measuring methods. The wicking property of hybrid composite yarn fabrics by Bireck method was mostly influenced by the structure of hybrid yarns than the absorption rate of constituent fibers; however, both the hygroscopicity of fibers and the composite yarn structure affected the wicking property of the fabrics in the drop method. Concerning drying properties, the KSK 0815B method measuring distilled moisture weight was more relevant to explain the drying characteristics of hybrid yarn fabrics than the KSK 0815A method measuring the time to drying. This study revealed that the drying properties of hybrid yarn fabrics were influenced by the hygroscopicity of constituent fibers, wicking properties of constituent yarns and structure of composite yarns.

• 한국의류산업학회지
• /
• 제20권4호
• /
• pp.457-463
• /
• 2018

This study examined the water absorption and drying properties of the thirteen types of the knitted fabrics for sports wear. These physical properties were analysed with relation to the constituent fiber cross-sectional shape and structure parameters of the knitted fabrics by regression analysis. Absorption and drying properties of the knitted fabric specimens were increased with increasing the porosity of the constituent yarns, which was attributed to the capillary channels in the yarns. The water absorption and drying properties were increased and decreased with increasing tightness factor and stitch density of the knitted fabric. The absorption property of the knitted fabric for perspiration absorption and fast dry sport-wear clothing was mostly influenced mostly by fiber cross-sectional shape and its characteristics, whereas, drying property was dependent on the structural parameters of the knitted fabric such as tightness factor and stitch density. Therefore, superior perspiration absorption and fast drying knitted fabric could be obtained in the fabric structure with optimum tightness factor and stitch density, and constituent yarn structure with non-circular fiber crosssection and high porosity. GATS method and MMT method are used to measure sweating fast drying properties and it is necessary to carry out studies using these measurement methods in order to compare with the results of this study.