• 한국대기환경학회지
• /
• 제11권2호
• /
• pp.163-170
• /
• 1995

The STEM II(Sulfur Transport Eulerian Model II) was adapted to investigate air pollutant transport phenomena between Eastern China and Korea. The movement of the high concentration region was clearly identified for the sulfate but was mot visible for SO$_{2}$. The 10.sim. 16 times more amount of SO$_{2}$ is transported to Korea compared to that of the local emission while the amount of the sulfate transported to Korea is 1 .sim. 1.3 times more than that of the sulfate produced by photo-chemical reaction in Korea. APTIs(Air Pollutant Transport Indices) for SO$_{2}$ and sulfate are approximately 0.85, which implies that the most of the SO$_{2}$ and sulfate existed in Korea are transported from Eastern China.

• 한국산업융합학회 논문집
• /
• 제4권3호
• /
• pp.329-337
• /
• 2001

This simulator is developed for the analysis of a MOSFET based on Thermally Coupled Energy Transport Model(TCETM). The simulator has the ability to calculate not only stationary characteristics but also non - stationary characteristics of a MOSFET. It solves basic semiconductor devices equations including Possion equation, current continuity equations for electrons and holes, energy balance equation for electrons and heat flow equation, using finite difference method. The conventional semiconductor device simulation technique, based on the Drift-Diffusion Model (DDM), neglects the thermal and other energy-related properties of a miniaturized device. I, therefore, developed a simulator based on the Thermally Coupled Energy Transport Model (TCETM) which treats not only steady-state but also transient phenomena of such a small-size MOSFET. In particular, the present paper investigates the breakdown characteristics in transient conditions. As a result, we found that the breakdown voltage has been largely underestimated by the DDM in transient conditions.

• Advances in nano research
• /
• 제13권1호
• /
• pp.77-86
• /
• 2022

This paper studied the peristaltic transport of upper convected Maxwell nanofluid through a porous medium in a heated (isothermal) symmetric vertical channel. The nanofluid is assumed to be electrically conducting in the presence of a uniform magnetic field. These phenomena are modeled mathematically by a differential equations system by taking low Reynolds number and long-wavelength approximation, the yield differential equations have solved analytically. A suggested new technique to display and discuss the trapping phenomenon is presented. We discussed and analyzed the pumping characteristics, heat function, flow velocity and trapping phenomena which were illustrated graphically through a set of figures for various values of parameters of the problem. The numerical results show that, there are remarkable effects on the vertical velocity, pressure gradient and trapping phenomena with the thermal change of the walls.

• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.397-397
• /
• 2012

• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.681-688
• /
• 2020

The telegrapher's theory was used to develop a new formulation for the neutron noise equation. Telegrapher's equation is supposed to demonstrate a more realistic approximation for neutron transport phenomena, especially in comparison to the diffusion theory. The physics behind such equation implies that the signal propagation speed is finite, instead of the infinite as in the case of ordinary diffusion. This paper presents the theory and results of the development of a new method for calculation of the neutron noise using the telegrapher's equation as its basis. In order to investigate the differences and strengths of the new method against the diffusion based neutron noise, a comparison was done between the behaviors of two methods. The neutron noise based on SN transport considered as a precision measuring point. The Green's function technique was used to calculate the neutron noise based on telegrapher's and diffusion methods as well as the transport. The amplitude and phase of Green's function associated with the properties of the medium and frequency of the noise source were obtained and their behavior was compared to the results of the transport. It was observed, the differences in some cases might be considerable. The effective speed of propagation for the noise perturbations were evaluated accordingly, resulting in considerable deviations in some cases.

• 분석과학
• /
• 제12권3호
• /
• pp.224-229
• /
• 1999

최근 캐리어를 이용한 액체막의 연구가 대단히 활발하다. 항생물질의 모넨신을 사용하여 옥타놀의 유기용매에 용해시켜 양이온교환막을 제조하였다. 이막의 평가를 Nernst-Planck식과 Fick식으로 막전위와 물질의 투과선택도를 분석하였다. 사용한 알카리이온의 농도에 대한 높은 투과선택성을 확인하였고, 시간에 따른 이온농도값은 선형관계를 알았다. 그러나 이온의 높은농도에서 변화량은 선형이 아니였다. 이를 위한 해석은 정지층(Stagnent Layer)을 하나 더 도입하여 업 - 힐 수송에서 직선관계를 얻었다.

• 대한화학회지
• /
• 제28권3호
• /
• pp.170-175
• /
• 1984

Dibenzo-18-crown-6(DBC) 및 dicyclohexyl-18-crown-6(DCC)를 이온의 운반체로 하는 여러 유기액체막을 통해 수소이온의 운반속도를 25$^{\circ}$C에서 측정하였다. 운반속도는 용매의 유전상수에 크게 영향을 받는데 이를 액체막 내부에서 이온 화학종이 가진 Born의 포텐셜 에너지 장벽을 들어 고찰하였다. 또한 음이온의 크기도 운반속도에 영향을 주었는데 이는 Born식으로 부터 새로이 유도된 이론적인 결과와 잘 일치하였다.

• Journal of applied mathematics & informatics
• /
• 제11권1_2호
• /
• pp.215-241
• /
• 2003

In this paper, solute transport in heterogeneous aquifers using a modified Fokker-Planck equation (MFPE) is investigated. This newly developed mathematical model is characterised with a time-, scale-dependent dispersivity. A two-dimensional finite volume quadrilateral mesh method (FVQMM) based on a quadrilateral background interpolation mesh is developed for analysing the model. The FVQMM transforms the coupled non-linear partial differential equations into a system of differential equations, which is solved using backward differentiation formulae of order one through five in order to advance the solution in time. Three examples are presented to demonstrate the model verification and utility. Henry's classic benchmark problem is used to show that the MFPE captures significant features of transport phenomena in heterogeneous porous media including enhanced transport of salt in the upper layer due to its parameters that represent the dependence of transport processes on scale and time. The time and scale effects are investigated. Numerical results are compared with published results on the some problems.

• 한국전산유체공학회지
• /
• 제12권1호
• /
• pp.9-15
• /
• 2007

A three dimensional numerical model to predict the flow and transport of mixtures and also the electrochemical reactions in polymer electrolyte membrane (PEM) fuel cells is developed. The numerical computation is base on vorticity- velocity method. Governing equations for the flow and transport of mixtures are coupled with the equations for electrochemical reactions and are solved simultaneously including production and condensation of vapor. Fuel cell performance predicted by this calculation is compared with the experimental results and resonable agreements are achieved.

• 산업기술연구
• /
• 제22권A호
• /
• pp.255-260
• /
• 2002

We prepared the nano-sized $TiO_2$ particles by the diffusion flame reactor and investigated the effects of several process variables on the generation and transport properties of $TiO_2$ particle. As the length from the tip of diffusion flame reactor increases, the size of $TiO_2$ particle increases by the coagulation between particles. The structure of $TiO_2$ particles prepared is almost found to be anatase. It was found that the $TiO_2$ particle size depends more largely on the change of reactor temperature than on the change of inlet $TiCl_4$ concentration.