• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.223-229
• /
• 1997

A source code is developed on the basis of Berreman's 4$\times$4 matrix formalism for the analysis of polarization transmission characteristics of twisted nematic liquid crystal display. By using the program, the polarization transmission characteristics of liquid crystal cells and polarizers are analyzed. For a normally white twisted nematic liquid crystal cell, we obtained a family of iso-contrast contours which helps to understand the viewing angle characteristics of the liquid crystal display device by using the cell. The program also help us to understand the variation of the degree of polarization as well as the deviation of the state of polarization of the light transmitted through the polarizer commonly used in the LCD according to the change in incidence angle. This result suggests the contrast of the images appearing on the LCD can be limited by the characteristics of the polarizer in addition to the liquid crystal cell.

• Journal of Biomedical Engineering Research
• /
• v.39 no.6
• /
• pp.250-255
• /
• 2018

Accurate blood typing is the crucial factor for safe and successful blood transfusion and plays a very important role in organ transplantation and genetic information of forensic medicine. Microfluidic devices have been developed to overcome the limitations of the conventional blood typing methods. In this study, we demonstrate a Lamb wave-based device for simple blood typing in a sample droplet and we propose new indices for quantitative and accurate blood typing. Using Lamb wave-induced acoustic streaming in the droplet, the blood sample and the reagent can be mixed rapidly and red blood cells start to form clumps, which is agglutination. Based on the recorded image and video, the intensity of transmitted light through the sample droplet is evaluated to determine the blood type. Effect of the concentration of suspended red blood cells was evaluated and we found that 10% concentration of suspended red blood cells was suitable to observe the difference between aggregated and non-aggregated samples. Finally, sample with blood type A could be determined using anti-A reagent in our Lamb wave-based device. Our device enables simple and accurate blood typing, which can be applied to resource-limited environments.

• Journal of Sensor Science and Technology
• /
• v.30 no.2
• /
• pp.114-118
• /
• 2021

In this study, the sensitivity of an active pixel sensor (APS) was adjusted by employing a gate/body-tied (GBT) p-channel metal-oxide semiconductor field-effect transistor (PMOSFET)-type photodetector with a transfer gate. A GBT PMOSFET-type photodetector can amplify the photocurrent generated by light. Consequently, APSs that incorporate GBT PMOSFET-type photodetectors are more sensitive than those APSs that are based on p-n junctions. In this study, a transfer gate was added to the conventional GBT PMOSFET-type photodetector. Such a photodetector can adjust the sensitivity of the APS by controlling the amount of charge transmitted from the drain to the floating diffusion node according to the voltage of the transfer gate. The results obtained from conducted simulations and measurements corroborate that, the sensitivity of an APS, which incorporates a GBT PMOSFET-type photodetector with a built-in transfer gate, can be adjusted according to the voltage of the transfer gate. Furthermore, the chip was fabricated by employing the standard 0.35 ㎛ complementary metal-oxide semiconductor (CMOS) technology, and the variable sensitivity of the APS was thereby experimentally verified.

• International Journal of Computer Science & Network Security
• /
• v.22 no.7
• /
• pp.91-102
• /
• 2022

With the evolution of wireless sensor network (WSN) technology, the routing policy has foremost importance in the Internet of Things (IoT). A systematic routing policy is one of the primary mechanics to make certain the precise and robust transmission of wireless sensor networks in an energy-efficient manner. In an IoT environment, WSN is utilized for controlling services concerning data like, data gathering, sensing and transmission. With the advantages of IoT potentialities, the traditional routing in a WSN are augmented with decision-making in an energy efficient manner to concur finer optimization. In this paper, we study how to combine IoT-based deep learning classifier with routing called, Kriging Regressive Deep Belief Neural Learning (KR-DBNL) to propose an efficient data packet routing to cope with scalability issues and therefore ensure robust data packet transmission. The KR-DBNL method includes four layers, namely input layer, two hidden layers and one output layer for performing data transmission between source and destination sensor node. Initially, the KR-DBNL method acquires the patient data from different location. Followed by which, the input layer transmits sensor nodes to first hidden layer where analysis of energy consumption, bandwidth consumption and light intensity are made using kriging regression function to perform classification. According to classified results, sensor nodes are classified into higher performance and lower performance sensor nodes. The higher performance sensor nodes are then transmitted to second hidden layer. Here high performance sensor nodes neighbouring sensor with higher signal strength and frequency are selected and sent to the output layer where the actual data packet transmission is performed. Experimental evaluation is carried out on factors such as energy consumption, packet delivery ratio, packet loss rate and end-to-end delay with respect to number of patient data packets and sensor nodes.

• Korean Journal of Optics and Photonics
• /
• v.33 no.4
• /
• pp.159-166
• /
• 2022

We measured the thickness and refractive index of a thin film using a double-slit diffraction experiment. The amount of phase step in the transmitted light generated by the thin film on the transparent substrate was measured by analyzing the diffraction pattern from the double slits. Experiments were conducted not only in air but also in distilled water, to determine thickness and refractive index simultaneously. To verify the validity of this method, we compared our values for thickness and refractive index to those measured using the well-established waveguide-coupling method. The suggested method is expected to be applied as a new method to simultaneously measure the thickness and refractive index of thin films, along with existing methods.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.96-105
• /
• 2002

Shear wall is the most important component resisting lateral loads imposed to a building by wind or earthquake. In shear walls, lateral load applied to framing is transmitted to sheathing panel through nailed joints between sheathing and framing so that the load is resisted by in-plane shear strength of sheathing. Therefore, nailed joints are the most basic and important component in the viewpoint of stiffness and strength of shear walls. In this study, stiffness and strength of single nailed joint were measured by single shear tests of nailed joints and used as input for theoretical models developed to estimate racking behavior of shear walls. And shear walls were tested to check the accuracy of theoretical models estimating racking resistance of shear walls. Stiffness of nailed joint was affected by grain direction of stud but direction of sheathing panel had little effect. Behavior of nailed joint and shear walls under lateral loads could be represented by three lines. Theoretical model II was more accurate than theoretical model I in estimating racking behavior of shear wall under loads.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.1
• /
• pp.9-17
• /
• 2022

As the COVID-19 pandemic situation worsens, the time spent indoors increases, and the exposure to indoor environmental pollution such as indoor air pollution and noise also increases, causing problems such as deterioration of human health, stress, and discord between neighbors. This paper designs and implements a system that measures and monitors indoor air quality and noise, which are representative evaluation criteria of the indoor environment. The system proposed in this paper consists of a particulate matter measurement subsystem that measures and corrects the concentration of particulate matters to monitor indoor air quality, and a noise measurement subsystem that detects changes in sound and converts it to a sound pressure level. The concentration of indoor particulate matters is measured using a laser-based light scattering method, and an error caused by temperature and humidity is compensated in this paper. For indoor noise measurement, the voltage measured through a microphone is basically measured, Fourier transform is performed to classify it by frequency, and then A-weighting is performed to correct loudness equality. Then, the RMS value is obtained, high-frequency noise is removed by performing time-weighting, and then SPL is obtained. Finally, the equivalent noise level for 1 minute and 5 minutes are calculated to show the indoor noise level. In order to classify noise into direct impact sound and air transmission noise, a piezo vibration sensors is mounted to determine the presence or absence of direct impact transmitted through the wall. For performance evaluation, the error of particulate matter measurement is analyzed through TSI's AM510 instrument. and compare the noise error with CEM's noise measurement system.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.6
• /
• pp.671-677
• /
• 2021

The present study aims to investigate the influence of the water to binder ratio of finishing mortar on the floor impact sound of apartments. For this, same resilient materials Expanded Polystyrene (EPS) with constant dynamic stiffness and different mortar layers with 52 %, 66 % and 72 % water to binder ratio respectively were used to build floating floor structures on which floor impact sounds were measured in standard testing facilities. As a result, it was found that light-weight floor impact sound was transmitted well when the water to binder ratio was 52% due to the high density. In case of heavy-weight floor impact sounds, since water to binder ratio of finishing mortar becomes higher as the weight of upper layer of resilient material lighter, it was shown that the natural frequency of floating floor structure moves to 63 Hz bandwidth which eventually cause a higher sound pressure level of floor impact sound. Thus, effect of water to binder ratio of mortar on the heavy-weight floor impact sounds was investigated.

• Journal of Digital Convergence
• /
• v.20 no.5
• /
• pp.317-322
• /
• 2022

In general, life jackets are worn by people in critical situations on the water to rise to the surface without falling into water, and life jackets simply serve to prevent sinking, but do not actively help rescue disaster areas in critical situations early. In order to solve this problem, a device that automatically generates a distress signal in an emergency situation was developed. When the survivor is in hand for a while, the distress signal generator is automatically separated from the life jacket, allowing information such as location values and other information to be transmitted wirelessly and a rescue signal using LED light. As a result of the experiment, when submerged in water, the life jacket and the distress signal generator were automatically separated, and the result of wireless transmission of the coordinate value of the location received by the GPS was confirmed. By using this, the location of the distress or missing person can be identified, which can be quickly replaced in case of an emergency

• International Journal of Computer Science & Network Security
• /
• v.22 no.6
• /
• pp.57-62
• /
• 2022

The recent past has seen a tremendous amount of advancement in the field of Internet of Things (IoT), allowing the influx of a variety of devices into the market. IoT devices are present in almost every aspect of our daily lives. While this increase in usage has many advantages, it also comes with many problems, including and not limited to, the problem of security. There is a need for better measures to be put in place to ensure that the users' data is protected. In particular, fitness trackers used by a vast number of people, transmit important data regarding the health and location of the user. This data is transmitted from the fitness device to the phone and from the phone onto a cloud server. The transmission from device to phone is done over Bluetooth and the latest version of Bluetooth Light Energy (BLE) is fairly advanced in terms of security, it is susceptible to attacks such as Man-in-the-Middle attack and Denial of Service attack. Additionally, the data must be stored in an encrypted form on the cloud server; however, this proves to be a problem when the data must be decrypted to use for running computations. In order to ensure protection of data, measures such as end-to-end encryption may be used. Homomorphic encryption is a class of encryption schemes that allow computations on encrypted data. This paper explores the application of homomorphic encryption for fitness trackers.