• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.31-35
• /
• 2011

Photovoltaic modules are well known to be one of the most eco generation of electricity. But usually study solar cell. Otherwise, PV modules are also important in power generation. We have to check other subsidiary materials. In this work benefit of using optically superior encapsulation materials(EVA) in generation temperature is demonstrated. Optical characterization of three EVA products demonstrates reduced transmission in the visible ray region of the solar spectrum. It will have a decisive effect to the module efficiency. Test is shown reduction of reflectance and transmittance. Reflections is dependent on the low iron glass. It can be seen between a specific wave length(240~350mm) about 1%. Transmittance in the entire ray region of light is markedly reduced to depending on the temperature rise. The graph is shown optical properties on EVA. Transmission was reduced. about 1%.

• Journal of Biosystems Engineering
• /
• 제35권6호
• /
• pp.450-457
• /
• 2010

Although cherry tomato is one of major vegetables consumed in fresh vegetable market, the quality grading method is mostly dependant on size measurement using drum shape sorting machines. Using Visible/Near-infrared spectroscopy, apparatus to be able to acquire transmittance spectrum data was made and used to estimate firmness, sugar content, and acidity of cherry tomatoes grown at hydroponic and soil culture. Partial least square (PLS) models were performed to predict firmness, sugar content, and acidity for the acquired transmittance spectra. To enhance accuracy of the PLS models, several preprocessing methods were carried out, such as normalization, multiplicative scatter correction (MSC), standard normal variate (SNV), and derivatives, etc. The coefficient of determination ($R^2_p$) and standard error of prediction (SEP) for the prediction of firmness, sugar, and acidity of cherry tomatoes from green to red ripening stages were 0.859 and 1.899 kgf, with a preprocessing of normalization, 0.790 and $0.434^{\circ}Brix$ with a preprocessing of the 1st derivative of Savitzky Golay, and 0.518 and 0.229% with a preprocessing normalization, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.397-397
• /
• 2007

Multilayer transparent electrodes, having a much lower electrical resistance than the widely used transparent conducting oxide electrodes, were prepared by using radio frequency magnetron sputtering. The multilayer structure consisted of five layers, indium tin oxided(ITO)/zinc oxide(ZnO)/Ag/oxide(ZnO)/ITO. With about 50nm thick ITO films, the multilayer showed a high optical transmittance in the visible range of the spectrum and had color neutrality. The electrical and optical properties of ITO/ZnO/Ag/ZnO/ITO multilayer were changed mainly by Ag film properties, which were affected by the deposition process of the upper layer. Especially ZnO layer was improved to adhesion of Ag and ITO. A high quality transparent electrode, having a resistance as low as and a high optical transmittance of 91% at 550nm, was obtained. It could satisfy the requirement for the flexible OLED and LCD.

• 한국표면공학회지
• /
• 제39권1호
• /
• pp.9-12
• /
• 2006

Al-doped ZnO(AZO)/Ag/AZO multi-layer films deposited on PET substrate by RF magnetron sputtering have a much better electrical properties than Al-doped ZnO single-layer films. The multi-layer structure consisted of three layers, AZO/Ag/AZO, the optimum thickness of Ag layers was determined to be $112{\AA}$ for high optical transmittance and good electrical conductivity. With about $1800{\AA}$ thick AZO films, the multi-layer showed a high optical transmittance in the visible range of the spectrum. The electrical and optical properties of AZO/Ag/AZO were changed mainly by thickness of Ag layers. A high quality transparent electrode, having a resistance as low as $6\;W/{\square}$ and a high optical transmittance of 87% at 550 nm, was obtained by controlling Ag deposition parameters.

• 한국정보전자통신기술학회논문지
• /
• 제11권6호
• /
• pp.671-677
• /
• 2018

In this paper, we investigated the vertical alignment characteristics of liquid crystals (LCs) on fluorinated self-assembled monolayers (FSAMs). For comparison, a commercialized homeotropic polyimide (PI) layer was used as an LC alignment layer. We confirmed the successful deposition of FSAMs and the change of FSAMs before and after rubbing treatment through contact angle measurement and atomic force microscopy. The optical transmittance spectrum of the FSAMs is similar to that of the homeotropic PI layer, which is a superior optical characteristic applicable to LC devices. When FSAMs were applied to the vertically aligned (VA) LC cell, uniform and vertical LC alignments were achieved. In addition, the voltage-transmittance characteristic of VA LC cell with FSAMs was superior to that of VA LC cell with the conventional homeotropic PI layers. These results indicate that the FSAMs are suitable as the homeotropic LC alignment layer for enhanced LC devices.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.95-98
• /
• 2003

Tin doped indium oxide(ITO) films, which is widely used as a transparent conductor in optoelectronic devices such as solar cell, liquid crystal display, plasma display panel, thermal heater, and other sensors, were prepared by using the capacitively coupled DC magnetron sputtering method. The influence of the substrate temperature, working gas pressure and deposition time on the electrical, optical and morphological properties were investigated experimentally. ITO films with the optimum growth conditions showed resistivity of $2.36{\times}10^{-4}(\Omega}-cm$ and transmittance of 86.28% for a film 680nm thick in the wavelength range of the visible spectrum.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.78-82
• /
• 2021

The Ga₂O₃ single crystal was grown through a floating zone method, and its structural and optical properties were instigated. It has a monoclinic crystal structure with a (100) crystal orientation and an optical band gap energy of 4.6 eV. It showed an average transmittance of 70% in the visible region. At room temperature, its photoluminescent spectrum showed three different peaks: the ultraviolet at 360 nm, the blue-green at 500 nm, and the red peaks at 700 nm. Especially, at liquid nitrogen temperature, the ultraviolet peak was optically active while the others were quenched.

• 비파괴검사학회지
• /
• 제35권1호
• /
• pp.1-11
• /
• 2015

본 연구에서는 온라인 감염 씨감자 비파괴선별 시스템을 구축하고 감염 씨감자 선별을 위한 통계적 모델을 개발하여 적용함으로써 선별시스템의 성능을 평가하였다. 선별모델 개발을 위해 토양병 및 잠복 감염의 대표적인 병원성 세균인 pectobacteruim atrosepticum을 인위적으로 씨감자에 감염시켜 씨감자 내부에 병징이 발현되도록 하여 실험하였다. 구축된 선별시스템을 통해 감염 및 정상 씨감자의 투과스펙트럼을 획득한 후 최소자승판별법(partial least square-discriminant analysis)을 이용하여 감염 씨감자 검출모델을 개발하였다. 개발된 모델의 검정결정계수는($R^2$) 0.943이었고 분류의 정확도는 99%(n=80) 이상으로 우수한 선별성능을 보였다. 개발된 온라인 감염 씨감자 선별시스템은 씨감자 선별뿐만 아니라 다양한 농산물의 감염을 검출하는 기반기술로 응용이 가능할 것으로 판단된다.

• 한국정보통신학회논문지
• /
• 제14권4호
• /
• pp.935-938
• /
• 2010

현재까지 개발된 투명전극재료 중에는 ITO가 가장 투명하면서 전기도 잘 통하고 생산성도 좋다. 투명전극은 비저항이 $1{\times}10^{-3}{\Omega}/cm$이하, 면저항이 $10^3{\Omega}/sq$이하로 전기전도성이 우수하고 380에서 780nm의 가시광선 영역에서의 투과율이 80%이상이라는 두 가지 성질을 만족시키는 박막이다. 본 연구에서는 스퍼터링 진공 증착 장치를 이용하여 투명 도전막(ITO: Indium Tin Oxide)을 제작하고 제작된 ITO 박막의 광 및 전기 그리고 물성적 특성을 조사하여 최상의 공정 조건을 확립하였다. 본 실험에서는 $In_2O_3:SnO_2$ 의 조성비는 90:10 wt% 인 타겟의 특성이 우수하였고, Ar:$O_2$의 분압비는 100:1 및 42:8의 조건이 적당하였으며, 온도는 $200^{\circ}C$ 가장 우수한 특성을 얻을 수 있었다. 본 연구에서 제작한 박막은 광 투과도가 90% 이상, 비저항이 $300\;{\mu}{\Omega}cm$ 이하의 특성을 갖게되어 이미지센서, 태양전지, 액정 텔레비젼등 빛의 통과와 전도성등 두가지 특성에 동시에 만족 될만한 성능을 가질 수 있음을 확인하였다.

• Journal of the Optical Society of Korea
• /
• 제2권1호
• /
• pp.30-33
• /
• 1998

We present the analysis of phase-shifted fiber Bragg gratings by coupled-mode equations. The transmission is expressed as that of a Fabry-Perot resonator with complex reflectance and complex transmittance. The transmission spectrum, the effective cavity length, and the behaviors with different phase-shifts are investigated. A very flattered transmission peak is obtained by introducing three phase-shifts in a grating.