• 한국통신학회논문지
• /
• 제25권9B호
• /
• pp.1527-1533
• /
• 2000

MIS(도체-부도체-반도체) 구조로된 전송선로를 해석하기 위하여 기본적으로 특성임피던스와 전파상수의 추출에 기초한 일반적인 특성화 절차가 사용된다. 본논문에서는 Si와 Si02층 사이에 0전위를 가진 도체를 일정한 간격의 주기적인 배열로 고안된 새로운 모델의 MIS구조에 대한 유한차분법을 이용한 해석방법을 제안한다. 특히 전송선로에 대한 유전체의 영향을 줄이기 위하여 0전위를 가진 주기적인 결합의 도체로 이루어진 구조가 시간영역의 신호를 통해 시험된다. Quality factor 뿐만아니라 주파수 의존적인 추출된 전송선로 파라미터와 등가회로 파라미터가 주파수 및 0전위 도체 간격의 함수로서 나타내진다. 특히 전송선로의 Quality factor가 특성임피던스 및 유효유전 상수의 큰 변화없이 개선될수 있음을 볼 수 있다.

• 분석과 대안
• /
• 제8권2호
• /
• pp.5-30
• /
• 2024

The purpose of this paper is to study the concept of public interest in broadcasting, which has been approached only from a policy or legislative perspective in Korea, through analysis of the program content itself. To this end, this study focuses on French broadcasting, which has a long history of public service, has learned the concept of 'public interest' during its long growth process, and has specifically put this concept into practice through program production. Analysis of French TV programs that have been broadcast over the past 10 years categorizes the concept of public interest that French broadcasting has embodied into the following three categories. The first is the characteristic of 'freedom of speech: 'participation' and 'generality' in the public sphere' shown by discussion programs or talk shows. The second is the characteristic of 'transmission of cultural identity', which is shown even in entertainment programs. The third is the characteristic of 'social capital: spreading the value of social solidarity' shown in documentary or discussion programs. In addition, we examine how French broadcasting is implementing public interest at a time when digital media such as YouTube or Instagram are becoming the center of the media environment, and a digital public social media called 'Culture Prime' created by public institutions.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권3호
• /
• pp.109-113
• /
• 2005

It has been reported that the failure phenomenon and variation of electrical characteristic due to the effect of electrostatic discharge(ESD) in silicon devices. But we had fess reports about the phenomenon due to the ESD in the compound semiconductors. So there are a lot of difficulty to the phenomenon analysis and to select the protection method of main circuits or the devices. It has not been reported that the relation between the ESD stress and GaN devices, which is remarkable to apply the operation in high temperature and high voltage due to the superior material characteristic. We studied that the characteristic variation of the AlGaN/GaN HEMT current, the leakage current, the transconductance(gm) and the failure phenomenon of device due to the ESD stress. We have applied the ESD stress by transmission line pulse(TLP) method, which is widely used in ESD stress experiments, and observed the variation of the electrical characteristic before and after applying the ESD stress. The on-current trended to increase after applying the ESD stress. The leakage current and transconductance were changed slightly. The failure point of device was mainly located in middle and edge sides of the gate, was considered the increase of temperature due to a leakage current. The GaN devices have poor thermal characteristic due to usage of the sapphire substrate, so it have been shown to easily fail at low voltage compared to the conventional GaAs devices.

• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.79-89
• /
• 1995

Rattle noise occurs at manual transmission as idling and driving of a automotive. It can be solved by torsional characteristics of a clutch disc. A clutch disc consist of a region of pre-damper and main-damper. Rattle noise is affected by pre-damper and main-damper equipped for a torsional spring and friction washer. Pre-damper range covers noise radiating from manual transmission when engine is idling and main-damper range covers noise when engine is driving. The aim of this reserch is to clear transmission rattle noise by way of torsional characteristics of a clutch disc. The experiment is carried out as idling and driving of a automobile equipped for 1.5L MPI engine, dry single-disc type clutch and manual transmission. In this study, the results show for a vibration of manual transmission as idling and driving can be cleared by a clutch disc of Pre-damper type.

• 한국정보통신학회논문지
• /
• 제16권6호
• /
• pp.1229-1234
• /
• 2012

본 논문은 데이터 중심 통신 미들웨어인 DDS에서 데이터 교환 시 미리 정의된 프로토콜에 의해 고정된 패킷 전송 방식을 사용함으로써 발생하는 문제점을 분석한다. 고정된 패킷 전송 방식은 노드 및 네트워크에 가해지는 부하가 동적으로 변경되는 환경에서 필요한 노드 리소스 사용량 증가에 적절히 대처하지 못하는 문제가 있다. 만약 노드와 네트워크에 가해지는 부하가 한계점을 넘으면 패킷 전송 성능이 급격히 떨어지게 되며 DDS 미들웨어의 가장 중요한 사용 목적인 실시간성을 보장하지 못하게 된다. 이를 해결하기 위하여 본 논문에서는 패킷 전송 방식을 실시간으로 조정하기 위한 적응형 패킷 전송 기법을 제안한다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권1호
• /
• pp.36-39
• /
• 2015

Many studies are being conducted to implement wireless charging, for example, for cellular phones or electronic tooth brushes, via wireless power transmission technique. However, the magnetic induction method had a very short transmission distance. To solve this problem, the team of Professor Marin Soljacic proposed a magnetic resonance system that used two resonance coils with the same resonance frequency. It had an approximately 40% efficiency at a 2m distance. The system improved the low efficiency and short distance problems of the existing systems. So it could also widen the application range of wireless power transmission. Many studies on the subject are underway. In this paper, the superconductor coil was used to improve the efficiency of magnetic resonance wireless power transmission. The resonance wireless power transmission system had a source coil, a load coil, and resonance coils (a transmitter and a receiver). The efficiency and distance depended on the characteristics of the transmitter and receiver coils that had the same resonance frequency. Therefore, two resonance coils were fabricated by superconductors. The current density of the superconductor was higher than that of the normal conductor coil. Accordingly, it had a high quality-factor and improved efficiency.

• ETRI Journal
• /
• 제35권4호
• /
• pp.655-665
• /
• 2013

Hybrid digital multimedia broadcasting (DMB) is a next-generation mobile TV system that combines broadcasting and wireless communication networks and can provide various high-quality multimedia services. However, if a system adheres to the current standard of transmitting the DMB content in the form of MPEG2-TS through wireless networks, it results in a burden on the network due to low transmission efficiency. The reasons for the low transmission efficiency are as follows. First, due to its constant bitrate characteristic, DMB MPEG2-TS includes a considerable amount of needless information, such as NULL packets and stuffing bytes. Second, due to the inflexibility of the Real-time Transport Protocol (RTP) standard, one cannot fully utilize the maximum transmission unit of the network when converting MPEG2-TS to RTP stream for transmission. This paper proposes a new transmission scheme that resolves these problems. Experiment results show that the proposed scheme improves data bitrate transmission efficiency by 8% to 36%, compared to the standard scheme, in the streaming of various real-DMB contents.

• 한국항행학회논문지
• /
• 제15권1호
• /
• pp.97-103
• /
• 2011

본 논문은 비선형 위상 특성을 갖고 있는 CRLH 전송선로를 이용하여 이중대역 평형 믹서를 제안한 것이다. 이 메타 재질 구조의 믹서는 이중대역에서 낮은 LO 누설 전력과 높은 RF-LO 고립도를 갖고 있어, LO와 RF 경로에 추가적인 여파기가 필요하지 않는다. 이 평형 믹서는 이중대역에서 동작하는 발룬과 윌킨슨 분배기를 이용하여 구현하였으며, 이중대역 특성은 CRLH 전송선로의 비선형 위상 특성을 이용하였다. 제안한 메타 재질을 이용한 평형 믹서는 실험을 결과를 통해서 증명하였으며, 870 MHz와 1660 MHz의 주파수에서 동작하도록 제작하여, 870 MHz에서 15.2 dB, 1660 MHz에서 21.2 dB의 변환 손실을 얻었다.

• ETRI Journal
• /
• 제37권1호
• /
• pp.128-137
• /
• 2015

In this work, a fishbone-type transmission line employing a comb-type ground plane (FTLCGP) was fabricated on polyethersulfone (PES) substrate, and its RF characteristics were thoroughly investigated. According to the results, it was found that the FTLCGP on PES showed periodic capacitance values much higher than other types of transmission lines due to a coupling capacitance between the signal line and ground, which resulted in a reduction of wavelength and line width. Using the theoretical analysis, we also extracted the bandwidth characteristic of the FTLCGP on PES. According to the result, the FTLCGP structure showed a cut-off frequency of 280 GHz.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.3075-3083
• /
• 1994

The applications of the electrical transmission line theory to the pressure propagation characteristics in the volume loaded fluid transmission line with step and impulse input wave is demonstrated in this paper. The method is based on the premise that the time response is the inverse Fourier transform of frequency spectrum of the wave which spectrum is a product of frequency spectrum of input pressure wave and system transfer function. The frequency response and transient response of step and impulse input wave in the volume loaded fluid transmission line is analysed by the Laplace transform and inverse Laplace transform with FFT numerical algorithm. The numerical solution of the distributed friction model is compared with the average friction model and the infinite product model. And the result is showed that FFT method may have major advantages for the simulation of fluid circuitary.