• 제목/요약/키워드: Transmission X-ray

검색결과 1,287건 처리시간 0.024초

알코올-물 혼합용액을 이용하는 Solvothermal 법에 의한 나노크기의 TiO2 제조 (Solvothermal Preparation of Nanocrystalline TiO2 Using Alcohol-water Mixed Solvent)

  • 이상근;박성수;홍성수;박종명;이승호;김대성;이근대
    • 공업화학
    • /
    • 제22권6호
    • /
    • pp.685-690
    • /
    • 2011
  • 본 연구에서는 $TiCl_4$ 출발물질 및 알코올과 물의 혼합용액을 이용한 solvothermal 법을 통하여 나노 크기의 $TiO_2$를 제조하였다. 이 때 혼합용액 중의 알코올의 종류 및 그 조성이 생성되는 $TiO_2$ 입자들의 결정상 혹은 응집상태에 미치는 영향에 대해 조사하였다. 생성물들의 물성은 X-선 회절법과 투과 및 주사전자 현미경을 이용하여 분석하였다. 1-부탄올/물의 부피 비가 각각 다른 혼합용매(1-부탄올/물; 100/0, 75/25, 50/50, 25/75, 0/100)를 이용한 solvothermal 법에 있어서 얻어진 루틸상의 $TiO_2$ 입자들의 응집상태는 1-부탄올/물의 비에 따라 변하였으며, 1-부탄올/물의 75/25 부피 비에서 잘 분산된 $TiO_2$ 나노 입자가 얻어졌다. 알코올과 물의 비를 75/25로 고정시킨 혼합 용매를 이용한 solvothermal 법에 있어서 알코올의 종류에 따라 생성되는 $TiO_2$ 입자들의 결정상이 변함을 확인하였다. 즉 메탄올, 에탄올 및 이소프로필 알코올의 혼합용액을 사용한 경우에는 아나타제상의 입자가 얻어지며 1-부탄올 혼합용액을 사용하면 루틸상의 $TiO_2$ 입자가 생성되었다. 이상의 결과들로부터 출발물질로는 $TiCl_4$를 그리고 반응용매로 알코올과 물의 혼합용액을 이용하며 더 이상의 첨가제를 사용하지 않는 solvothermal 법에 있어서는, 단순히 혼합용액의 조성 또는 알코올의 종류를 변화시킴으로써 생성되는 $TiO_2$ 입자들의 분산성 향상 및 결정상 조절이 가능한 것을 확인할 수 있었다.

장티브스에 관한 임상적 관찰 (Clinical review of Typhoid Fever Patients)

  • 최정신
    • 대한간호학회지
    • /
    • 제6권1호
    • /
    • pp.60-71
    • /
    • 1976
  • The author reviewed the medical records of 96 typhoid fever patients who were diagnosed, admitted, and treated at Sea grave Memorial Hospital from January 1 , 1973 through August 31, 1975. Diagnosis was determined by clinical observation, aerology and bacteriology, eighty patients were treated medically, the remaining 16 patients required surgical intervention. The following results were obtained: 1) The age distribution of the patients revealed that 33.3% wert between 10 and 19 years old 21.9% were between 20 and 29, and 19.8% were between 30 and 39. The majority of patients were from these more active age groups. Male to female sex ratio was 1.3 : 1 2) Seasonal distribution was observed. Most illness occurred in the summer and autumn month 5. 3) 84. 3%of the patients came from farm families. 4) Duration between onset and admission averaged 16.0 days. The group without compilations was admitted after an average of 15. 1 days; The group with complications was ad-matted after an average of 19.4 days. 5) Methods of treatment before admission were as follows: 10.4% at medical clinics, 61, 5% at pharmacies (antibiotics 47.9%, other. drugs 13.5%), 7.3% by herb medications, 20.8% had no treatment. 6) Main clinical symptoms were as follows: fever 93.8%, headache 47.9%, abdominal pain 47.9%, chills 38.5%, cough 36.5%, general weakness 26.0%, nausea e vomiting 24.0% and generalized pain 21.9%. 7) Temperature of patients on admission: 22.9% were 39f or more, 67.6% were between 37℃ and 38℃, and 9.4% were 37℃ or less. 8) Occurrence of intensional bleeding after onset of disease averaged 9.3 days; perforation occurred at an average of 19. 1 days. 9) Interval between onset of major complication and surgical intervention averaged 2.8 days. 10) Among the 68 patients who underwent the bacteriological test the positive rate was 44.1% (30). The positive ,ales to, each separate culture method were as follows: 20.4% in the blood culture, 40.4% in the stool culture and 6.7% in the urine culture. Among these bacteriological positive patients 15 patients had a negative results or less than 160 titer of vidal reaction. 11) The initial vidal test of the total group showed a counts of 160 titer or more in 60.4% and less than 160 titer in 39.6%, 12) W. B. C. Counts in the uncomplicated group indicated that 32.5% were 6,000/㎣ or less, 47.5% were between 6,000 and 10,000, arid 20.0% were 10,000/㎣ or more. In the complicated group, 37.6% were 6,000/㎣ or less, 25,0% were 6,000-10,000/㎣ and 37.6% were 10,000/㎣ or more. 13) Duration of hospital stay of the patients averaged 6.4 days in the uncomplicated group and 12.7 days in the complicated group. 14) Subdiaphragmatic free air simple X-ray was found in 91.7% of the perforated cases. 15) Duration of antibiotic therapy until an febrile state was attained averaged 4.8 days in the uncomplicated group and 6.5 days in the complicated group. 16) Operative procedures were as follows: one layer simple closure of their perforation with or without debasement in 56.3%, drainage only in 6.3%, small bowel resection with primary anastomosis in 18.8% , externalization in 6.3%, cholecystectomy in 6.3%, The clinical findings of this study suggest the following recommendations. According to Top's report; 1% of typhoid fever patients treated with chlorarnphenicol and 2% of patients treated with other drugs become chronic carriers. Therefore, importance should be given to the strict control of these carriers. Immunization, improvement of sanitation and living standards are all needed for the prevention and treatment of disease, but a more serious problem is a lack of knowledge on the part of patients and their families. Thus it is most urgent to enlighten the citizens about the transmission and hygiene related to contagious disease. Legal restriction of sale of antibiotics at drug stores without a physician's prescription is an urgent matter for public health administrators. An even more important nursing responsibility is the reemphasis on health education both in the clinical setting and in the home.

  • PDF

영아의 결핵 (Tuberculosis in Infants)

  • 김이경;나송이;박진영;최은화;이환종
    • Pediatric Infection and Vaccine
    • /
    • 제5권1호
    • /
    • pp.69-78
    • /
    • 1998
  • 목 적 : 1세 미만 영아들은 결핵에 이환될 경우 뇌막염이나 속립성 결핵 등의 심한 질환으로 진행할 위험이 다른 연령군에 비하여 높으므로 이들에서 결핵의 조기 진단에 의한 신속한 치료가 매우 중요하다. 본 연구는 1세 미만 영아 결핵 환아들의 임상적인 특징을 관찰하여 향후 진단, 치료 및 예방에 도움을 얻고자 하였다. 방 법 : 1985년 7월부터 1997년 4월까지 서울대학교 어린이병원 소아과에 입원했던 1세 미만의 결핵 환아 29명의 의무 기록을 검토하여 후향적으로 분석하였다. 결핵의 진단은 각종 가검물에서 M. tuberculosis가 분리되거나(13례) 병리학적으로 결핵과 부합하는 소견을 보이는 경우(1례)를 포함하였으며, 미생물학적 병리학적 증거를 얻지 못한 예들에서는 성인결핵 환자에의 노출력, 임상 양상, 흉부 방사선 소견, 5 투베르쿨린 단위로 시행한 망토우 반응 결과 및 치료에 대한 반응 등을 종합하여 개별적으로 판단하였다. 결 과 : 질환의 형태는 단독 폐결핵으로 나타난 경우가 12례로 가장 많았고, 뇌막염이 동반된 폐결핵 5례, 폐결핵과 림프절염 3례, 뇌막염 3례 및 속립 결핵 6례 등이었다. 환아들의 평균 나이는 7개월이었다. 감염원을 찾을 수 있었던 경우가 19례였으며, 이 중 환아에서 결핵이 의심되어 주변 어른을 검사한 결과 결핵이 발견된 경우가 7례였다. 처음 방문시 증상이 있었던 경우가 27례였으며 주소는 호흡기 증상이 12례, 중추신경계 증상이 10례였다. 호흡기 증상은 기침, 가래 외에도 빈호흡, 천명 등의 호흡 곤란 증상이 7례에서 있었다. 폐 청진상 수포음이 6례, 천명이 7례, 호흡음의 감소가 9례에서 있었고, 간비종대가 흔하였다. 흉부 방사선 검사상 이상이 26례에서 있었고 이 중 폐문부 림프절을 동반한 폐실질의 병변을 보였던 경우가 18례로 가장 많았다. 국소적 또는 전반적인 기종성 변화가 7례에서 있었다. 결 론 : 영아들은 결핵 진단시 증상을 갖고 있는 경우가 대부분이었고, 폐결핵의 발병시 천명, 기종성 변화, 호흡음 감소 등의 기관지 폐쇄의 징후가 흔하며 호흡 부전으로 진행할 수 있으므로 진단 및 치료에 주의를 요한다. 성인 결핵 환자 발생시 노출된 영아에 대한 예방 요법을 철저히 시행하여야 하며, 영아에서 결핵이 의심될 때 감염원을 찾음으로써 진단에 도움을 줄 수 있다는 사실을 재확인하였다.

  • PDF

A bilayer diffusion barrier of atomic layer deposited (ALD)-Ru/ALD-TaCN for direct plating of Cu

  • Kim, Soo-Hyun;Yim, Sung-Soo;Lee, Do-Joong;Kim, Ki-Su;Kim, Hyun-Mi;Kim, Ki-Bum;Sohn, Hyun-Chul
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
    • /
    • pp.239-240
    • /
    • 2008
  • As semiconductor devices are scaled down for better performance and more functionality, the Cu-based interconnects suffer from the increase of the resistivity of the Cu wires. The resistivity increase, which is attributed to the electron scattering from grain boundaries and interfaces, needs to be addressed in order to further scale down semiconductor devices [1]. The increase in the resistivity of the interconnect can be alleviated by increasing the grain size of electroplating (EP)-Cu or by modifying the Cu surface [1]. Another possible solution is to maximize the portion of the EP-Cu volume in the vias or damascene structures with the conformal diffusion barrier and seed layer by optimizing their deposition processes during Cu interconnect fabrication, which are currently ionized physical vapor deposition (IPVD)-based Ta/TaN bilayer and IPVD-Cu, respectively. The use of in-situ etching, during IPVD of the barrier or the seed layer, has been effective in enlarging the trench volume where the Cu is filled, resulting in improved reliability and performance of the Cu-based interconnect. However, the application of IPVD technology is expected to be limited eventually because of poor sidewall step coverage and the narrow top part of the damascene structures. Recently, Ru has been suggested as a diffusion barrier that is compatible with the direct plating of Cu [2-3]. A single-layer diffusion barrier for the direct plating of Cu is desirable to optimize the resistance of the Cu interconnects because it eliminates the Cu-seed layer. However, previous studies have shown that the Ru by itself is not a suitable diffusion barrier for Cu metallization [4-6]. Thus, the diffusion barrier performance of the Ru film should be improved in order for it to be successfully incorporated as a seed layer/barrier layer for the direct plating of Cu. The improvement of its barrier performance, by modifying the Ru microstructure from columnar to amorphous (by incorporating the N into Ru during PVD), has been previously reported [7]. Another approach for improving the barrier performance of the Ru film is to use Ru as a just seed layer and combine it with superior materials to function as a diffusion barrier against the Cu. A RulTaN bilayer prepared by PVD has recently been suggested as a seed layer/diffusion barrier for Cu. This bilayer was stable between the Cu and Si after annealing at $700^{\circ}C$ for I min [8]. Although these reports dealt with the possible applications of Ru for Cu metallization, cases where the Ru film was prepared by atomic layer deposition (ALD) have not been identified. These are important because of ALD's excellent conformality. In this study, a bilayer diffusion barrier of Ru/TaCN prepared by ALD was investigated. As the addition of the third element into the transition metal nitride disrupts the crystal lattice and leads to the formation of a stable ternary amorphous material, as indicated by Nicolet [9], ALD-TaCN is expected to improve the diffusion barrier performance of the ALD-Ru against Cu. Ru was deposited by a sequential supply of bis(ethylcyclopentadienyl)ruthenium [Ru$(EtCp)_2$] and $NH_3$plasma and TaCN by a sequential supply of $(NEt_2)_3Ta=Nbu^t$ (tert-butylimido-trisdiethylamido-tantalum, TBTDET) and $H_2$ plasma. Sheet resistance measurements, X-ray diffractometry (XRD), and Auger electron spectroscopy (AES) analysis showed that the bilayer diffusion barriers of ALD-Ru (12 nm)/ALD-TaCN (2 nm) and ALD-Ru (4nm)/ALD-TaCN (2 nm) prevented the Cu diffusion up to annealing temperatures of 600 and $550^{\circ}C$ for 30 min, respectively. This is found to be due to the excellent diffusion barrier performance of the ALD-TaCN film against the Cu, due to it having an amorphous structure. A 5-nm-thick ALD-TaCN film was even stable up to annealing at $650^{\circ}C$ between Cu and Si. Transmission electron microscopy (TEM) investigation combined with energy dispersive spectroscopy (EDS) analysis revealed that the ALD-Ru/ALD-TaCN diffusion barrier failed by the Cu diffusion through the bilayer into the Si substrate. This is due to the ALD-TaCN interlayer preventing the interfacial reaction between the Ru and Si.

  • PDF

Ti-Getter가 Ti0.96Co0.02Fe0.02O2의 자기적 특성에 미치는 영향 (Ti-Getter Effects on Magnetic Properties of Ti0.96Co0.02Fe0.02O2)

  • 남효덕;김성진;백종근;이상률;박철수;김응찬
    • 한국자기학회지
    • /
    • 제18권3호
    • /
    • pp.109-114
    • /
    • 2008
  • Solid State Reaction법으로 $Ti_{0.96}Co_{0.02}Fe_{0.02}O_2$ 시료를 제조하였다. 각각의 시료를 $870^{\circ}C$, $900^{\circ}C$, $930^{\circ}C$로 24시간 열처리하였다. 이 때 Ti-getter의 유무를 통해 각각의 온도에서 Ti-getter에 따라 시료의 특성이 어떻게 변화하는지 관찰하고자 한다. 제작된 시료의 구조분석을 위해 시료의 분말 회절실험을 실시하였다. VSM을 이용하여 시료의 자성을 측정하고, 금속이온의 형태와 시료 내에서 cluster로 존재하는지 여부를 조사하기 위해 TEM과 SEM, EDS실험을 하였다. XRD pattern 분석결과, 결정구조는 tetragonal구조로써, 순수한 Rutil-$TiO_2$상이 주를 이루며, 2차상으로는 getter가 없을 때는 $Fe_2TiO_5$, 있을 때는 Fe가 관측되었다. 시료의 자성을 측정한 결과, getter가 없을 때는 $870^{\circ}C$일 때 자화값은 약 $0.025{\mu}B$/CoFe 정도로 강자성을 보이지만, $900^{\circ}C$$930^{\circ}C$에서는 강자성을 보이지 않는다. Ti-getter가 있을 때의 자화값은 $870^{\circ}C$에서는 약 $1.1\;{\mu}B$/CoFe, $900^{\circ}C$$930^{\circ}C$일 때는 $1.5\;{\mu}B$/CoFe 정도로 강자성을 보인다. 이러한 자성의 차이는 Ti-getter의 유무에 따른 2차상의 차이로 결정된 것으로 보인다. Titanium이 고온에서 산소와 질소, 공기 속의 수분과 쉽게 결합하는 성질을 가지고 있기 때문에 이것을 이용하면 좀 더 낮은 산소분압을 얻을 수 있다. 시료의 산소분압에 따라 자화값이나 원자 구조의 변화에 상당한 영향을 받게 되어 시료의 특성이 다르게 나타나는 것을 확인 할 수 있다. TEM과 SEM, EDS실험결과에서는 Co와 Fe가 골고루 분포하는 영역이 있는가 하면 Ti만 관측되는 부분도 존재했다. 시료의 Co와 Fe가 시료전체에 골고루 퍼져있는 것이 아니라 부분적으로 분포하고 있음을 확인 할 수 있다.

60 nm 와 20 nm 두께의 수소화된 비정질 실리콘에 따른 저온 니켈실리사이드의 물성 변화 (Property of Nickel Silicide with 60 nm and 20 nm Hydrogenated Amorphous Silicon Prepared by Low Temperature Process)

  • 김종률;박종성;최용윤;송오성
    • 한국진공학회지
    • /
    • 제17권6호
    • /
    • pp.528-537
    • /
    • 2008
  • ICP-CVD를 사용하여 수소화된 비정질 실리콘(a-Si:H)을 60 nm 또는 20 nm 두께로 성막 시키고, 그 위에 전자총증착장치(e-beam evaporator)를 이용하여 30 nm Ni 증착 후, 최종적으로 30 nm Ni/(60 또는 20 nm a-Si:H)/200 nm $SiO_2$/single-Si 구조의 시편을 만들고 $200{\sim}500^{\circ}C$ 사이에서 $50^{\circ}C$간격으로 40초간 진공열처리를 실시하여 실리사이드화 처리하였다. 완성된 니켈실리사이드의 처리온도에 따른 면저항값, 상구조, 미세구조, 표면조도 변화를 각각 사점면저항측정기, HRXRD, FE-SEM과 TEM, SPM을 활용하여 확인하였다. 60 nm a-Si:H 기판 위에 생성된 니켈실리사이드는 $400^{\circ}C$이후부터 저온공정이 가능한 면저항값을 보였다. 반면 20 nm a-Si:H 기판 위에 생성된 니켈실리사이드는 $300^{\circ}C$이후부터 저온공정이 가능한 면저항값을 보였다. HRXRD 결과 60 nm 와 20 nm a-Si:H 기판 위에 생성된 니켈실리사이드는 열처리온도에 따라서 동일한 상변화를 보였다. FE-SEM과 TEM 관찰결과, 60 nm a-Si:H 기판 위에 생성된 니켈실리사이드는 저온에서 고저항의 미반응 실리콘이 잔류하고 60 nm 두께의 니켈실리사이드를 가지는 미세구조를 보였다. 20 nm a-Si:H 기판위에 형성되는 니켈실리사이드는 20 nm 두께의 균일한 결정질 실리사이드가 생성됨을 확인하였다. SPM 결과 모든 시편은 열처리온도가 증가하면서 RMS값이 증가하였고 특히 20 nm a-Si:H 기판 위에 생성된 니켈실리사이드는 $300^{\circ}C$에서 0.75 nm의 가장 낮은 RMS 값을 보였다.

주성분분석을 이용한 C[11]-PIB imaging 영상분석 (Principal component analysis in C[11]-PIB imaging)

  • 김남범;신귀순;안성민
    • 핵의학기술
    • /
    • 제19권1호
    • /
    • pp.12-16
    • /
    • 2015
  • 주성분분석(Principal component analysis, PCA)은 고차원 변수들 사이의 복잡한 상관성 구조를 더 낮은 차원으로 단순화하여 상관성의 구조를 쉽게 설명하기 위한 다변량분석기법으로 뇌영상 분석에서 자주 사용되는 방법이다. 주성분분석의 기본개념은 서로 직교하는 변수들의 선형결합을 통해서 원래의 뇌영상 자료가 가지고 있는 전체정보를 최대한 설명할 수 있는 서로 독립적인 새로운 변수들을 유도하는 것이다. 뇌영상분석에서 주성분분석의 효율성과 유용성을 알아보기 위해서 C[11]-PIB 영상을 이용하여 분석하였다. 대상 및 방법으로는 평균나이가 같은 9명의 정상인, 10명의 알츠하이머/경도인지장애환자들의 C[11]-PIB 영상을 이용하였다. PET-CT 장비로는 Biograph 6 Hi-Rez (Siemens-CTI, Knoxville, TN)를 영상을 획득하였고 9.6 MBq/kg C[11]-PIB를 정맥주사 한 후 40분 후에 20분 동안 3D acquisition mode로 방출영상을 얻었다. Attenuation map은 X-ray CT scan을 이용하여 재구성하였다(130 kVp, 240 mA). PIB template을 만들기 위해서 정상인에서 3T MRI T1-weighted 영상을 동시에 얻었다. 주성분분석을 위한전처리과정으로서 공간정규화 및 공간편평화를 SPM8을 이용하여 실시하였고 주성분분석은 Matlab2012b를 이용하여 분석하다. 결과는 주성분분석을 통해서 서로 독립적인 주성분영상들을 얻을 수 있었다. 주성분분석을 통해서 얻어진주성분영상은 C[11]-PIB brain PET 영상의 패턴을 몇 개의 주성분으로 단순화 할 수 있었으며 주로는 neocortex를 변동 나타내는 영상, white matter의 변동을 나타내는 영상 그리고 pons등 deep brain의 변동을 나타내는 영상 등으로 단순화되었다. 결론으로는 주성분분석은 C[11]-PIB brain 영상을 단순화하여 영상의 패턴을 해석하는데 매우 유용하였다. 이러한 주성분분석은C[11]-PIB영상 분석뿐만 아니라 뇌의 포도당 대사를 측정하는 FDG-PET 또는 뇌기능영상등의 다변량분석 방법으로서 그 적용범위가 클 것으로 기대된다.

  • PDF