• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.991-997
• /
• 2003

The effect of A1$_4$C$_3$ additive on the thermoelectric properties of SiC ceramics were studied. Porous SiC ceramics with 47∼59% relative density were fabricated by sintering the pressed $\alpha$-SiC powder compacts with A1$_4$C$_3$at 2100∼220$0^{\circ}C$ for 3 h in Ar atmosphere. Crystalline phases of the sintered bodies were identified by powder X-Ray Diffraction (XRD) and their microstructures were observed with a Scanning Electron Microscope (SEM). In the case of A1$_4$C$_3$ addition, the phase transformation of 6H-SiC to 4H-SiC could be observed during sintering. The Seebeck coefficient and electrical conductivity were measured at 550∼95$0^{\circ}C$ in Ar atmosphere. In the case of undoped specimens, the Seebeck coefficients were positive (p-type semiconducting) possibly due to a dominant effect of the acceptor impurities (Al, Fe) contained in the starting powder and electrical conductivity increased as increasing sintering temperature. Electrical conductivity of A1$_4$C$_3$doped specimen is larger than that of undoped specimen under the same condition, which might be due to the reverse phase transformation and increasing of carrier density. And the Seebeck coefficient of A1$_4$C$_3$ doped specimen is also larger than that of undoped specimen. The density of specimen, the amount of addition and sintering atmosphere had significant effects on the thermoelectric property.

• 기호학연구
• /
• no.56
• /
• pp.109-136
• /
• 2018

The purpose of this study is to examine the narrative correlation of nonverbal signs found in Charade. Charade, by using nonverbal signs, provides information about the character's psychological change, his or her relationship with others, and the places where they stay. The study of Charade, then, has to be approached considering not only the transmission of messages through nonverbal signs but also its signification. This study has analyzed the narrative and formation process of the subject that triggers the subject's activity by taking narrative semiotics to the film Carol (2015). As the status of women is represented by the mise-en-$sc{\grave{e}}ne$ at this time, this study aims to examine such a fact through Charade, which belongs to the realm of mise-en-$sc{\grave{e}}ne$. In this study, nonverbal signs that are used in Charade are drawn based on the nonverbal communication theory. The result of analyzing the texts showed that the use of interior decoration was outstanding in the process of expressing the status of female subjects. The use of gaze was noticeable in the process of expressing the acquisition of female subjects' power. Besides, it should be noted that the use of nonverbal signs such as accessories, territoriality, or gesture, was worthy of attention. It was confirmed that such nonverbal signs play an important role in the formation of subjects and configuration of narrative transformation.

• Korean Journal of Culture and Social Issue
• /
• v.28 no.3
• /
• pp.513-527
• /
• 2022

This study was conducted to examining the socio-cultural impact of the COVID-19 pandemic that swept the world around 2020, and the transformation of norms and social problems due to COVID-19. For this, the characteristics of changes in the socio-cultural norms of the 14th century European Black Death, a representative example of the pandemic, were derived, and based on this, the COVID-19 pandemic was analyzed. The Black Death served as an opportunity to change social norms based on the existing religious authority and the power of the feudal system to the Enlightenment. The population declination and labor shortage also promoted commercialization and mechanization. Printing, which spread during this period, led to the popularization of knowledge, which raised the level of thinking and led to epochal scientific development. This became the foundation of the Industrial Revolution. Like the recent Black Death, COVID-19 has triggered changes in social norms. The technological environment of metaverse, a mixture of virtual and reality, has changed the norm of a consistent identity into free and open identities exerting various potentials through alternate characters. In addition, meme, which are about people being friendly to those with the same worldview as him on the metaverse, weakened the sense of isolation in non-face-to-face situations. Artificial intelligence (AI), which developed during the COVID-19 pandemic, has entered the stage of being used for creative activities beyond the function of assisting humans. Discussions were held on what new social problems would be created by the social norms changed due to the COVID-19 pandemic.

• Informatization Policy
• /
• v.31 no.1
• /
• pp.53-71
• /
• 2024

Digital transformation calls for a new social contract that must transform the existing norms and paradigms of our society. Digital constitutionalism is a way of building new order through a new social contract and is an ideology that aims to establish and ensure a normative framework for the protection of fundamental rights and balance of power in the digital environment. The Internet/Digital Bill of Rights is a representative example of constitutionalization based on this ideology. Initially, it took the form of an informal, non-binding declaration led by civil society organizations or various stakeholders, setting forth normative principles adapted to the changing nature of digital society. More recently, they have taken the form of formal charters, declarations, or laws containing principles at the national or regional level. The "Digital Bill of Rights" proposed by the Korean government can be seen as an example of this trend, but it does not fully reflect the recent trend of Internet/Digital Bills of Rights in terms of substantive and procedural legitimacy. Even if the government provides a certain normative direction, it needs to be combined with a concrete action plan in each area to create a balance of norms with digital technologies and industries instead of simply being a "declaration".

• Korean Journal of Biological Psychiatry
• /
• v.3 no.2
• /
• pp.216-221
• /
• 1996

The quantitative EEGs of obsessive-compulsive disorder patients were analyzed using spectral analysis and compared to age and sex-matched controls. The subjects were 19 patients(men=15, women=4) suffering from obsessive-compulsive disorder(DSM-III-R). Absolute power, relative power and interhemispheric asymmetry of EEG were used to compare obsessive-compulsive disorder patients with controls. In order to fit the EEG data to a normal distribution, a log transformation of power values of every bandwidth in each deviation was calculated prior statistical analysis. The Wilcoxon rank test was performed to compare obsessive-compulsive group to the control group. In obsessive-compulsive disorder, abnormalities of quantitative EEGs are prominent in fronto-central. These results ore compatible with other brain imaging studies of obsessive-compulsive disorder and suggested that fronto-central area plays an important role in the pathophysiology of obsessive-compulsive disorder.

• Science of Emotion and Sensibility
• /
• v.21 no.2
• /
• pp.137-144
• /
• 2018

The study figured out the operational conditions of a two-way movement actuator made of one-way shape memory alloy (OWSMA) for versatile ventilation intelligent garments. To develop a low-power actuator that consumes energy only when a garment changes its form such as opening and closing, multiple channels of OWSMA were used, and optimum diameter of the wires was examined. For the switch device, optimum voltage application unit time was determined. Optimum diameter of OWSMA wire was determined by applying 3.7V to the pre-determined candidate diameters, which demonstrated two-way operation in previous studies. In order to evaluate the optimum voltage application time, the internal diameter of the actuator was measured while increasing and decreasing by 50 ms from the unit time of voltage application. Delay time under two-way operation of the actuator was measured to minimize interference caused by heat between channels. Power of 3.7V was applied to OWSMA for assessment of optimal time, and the whole process from heating to cooling was video-recorded with a thermal image camera to determine the point of time at which the temperature of OWSMA wire dropped below the phase transformation temperature. The results showed that $0.4{\Phi}$ was the most suitable diameter, and the optimum unit time of voltage applied to open and close the actuator was 4100ms. It was also shown that the delay time should be more than 1.8 seconds between two-way operations of the actuator.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.9-18
• /
• 2008

Curling is caused by the difference in the temperature and humidity by the depth of the slab in Jointed Plain Concrete Pavement. Slab curvature shape and size change due to curling exert a profound influence on the internal stress and roughness of the pavement, affecting structural and functional performance of the pavement. Direct measurement of the slab curvature entails many problems. Many measuring instruments have to be installed at the early-stage of the pavement construction, and the behavior of the slab curvature needs to be measured accurately from the early-stage. Moreover, the cost and technical difficulty are very formidable to measure the slab curvature. This study develops a measurement method for slab curvature in jointed concrete pavement at any given time by applying Power Spectrum Density Analysis and Inverse Fast Fourier Transformation to the profile data, that can be easily obtained at the construction field site. The effectiveness of this developed method is verified by measuring the profile data of the test road of jointed concrete pavement at an inland central expressway by the hour and by examining the result of extracting the slab curvature shape from this profile data. Additionally, the profile data of CRCP(Continuously Reinforced Concrete Pavement) sections on the same expressway were obtained and analyzed at the same time. The validity of the method developed for the slab curvature shape extraction is verified by comparing the result from the analysis of the profile data of CRCP sections with that from the analysis of the prof1Ie data of jointed concrete pavement sections.

• Clean Technology
• /
• v.29 no.4
• /
• pp.255-261
• /
• 2023

Power semiconductors are semiconductors used for power conversion, transformation, distribution, and control. Recently, the global demand for high-voltage power semiconductors is increasing across various industrial fields, and optimization research on high-voltage IGBT components is urgently needed in these industries. For high-voltage IGBT development, setting the resistance value of the wafer and optimizing key unit processes are major variables in the electrical characteristics of the finished chip. Furthermore, the securing process and optimization of the technology to support high breakdown voltage is also important. Etching is a process of transferring the pattern of the mask circuit in the photolithography process to the wafer and removing unnecessary parts at the bottom of the photoresist film. Ion implantation is a process of injecting impurities along with thermal diffusion technology into the wafer substrate during the semiconductor manufacturing process. This process helps achieve a certain conductivity. In this study, dry etching and wet etching were controlled during field ring etching, which is an important process for forming a ring structure that supports the 3.3 kV breakdown voltage of IGBT, in order to analyze four conditions and form a stable body junction depth to secure the breakdown voltage. The field ring ion implantation process was optimized based on the TEG design by dividing it into four conditions. The wet etching 1-step method was advantageous in terms of process and work efficiency, and the ring pattern ion implantation conditions showed a doping concentration of 9.0E13 and an energy of 120 keV. The p-ion implantation conditions were optimized at a doping concentration of 6.5E13 and an energy of 80 keV, and the p+ ion implantation conditions were optimized at a doping concentration of 3.0E15 and an energy of 160 keV.

• Korean Journal of Psychosomatic Medicine
• /
• v.25 no.1
• /
• pp.73-85
• /
• 2017

Objectives : In this study I made investigations how 'strange hunger' and 'compulsive overeating' threatening the ego could be resolved and healed. And I aim to present a healing model of psychotherapy and analysis as one of methods of treatment for 'eating disorder'. Methods : The analysands of this study were outpatients who visited the department of psychiatry of Yong-In Mental Hospital from March 2008 to February 2017 with 'hunger' and 'compulsive overeating' as their chief complaints. This study is based on the detailed records of the process of analysis including dreams and visions. Results : 1) Throughout the process of analysis that explore both consciousness and unconsciousness(dream, vision), hunger and compulsive overeating is improved and healed in all analysands. 2) The Imago of 'Snake' appeared in dreams and visions of all analysands. 3) By suffering impulse rather than acting it out, impulse transformes itself into 'Imago'. As impulse transforms into 'Imago' and reveals the 'meaning' of it, ego-threatening power of impulse weakens and mood is calmed. And as a result, synthesis of consciousness and unconsciousness and creative transformation of personality can be possible. Conclusions : In some people, 'hunger' and 'compulsive overeating' are 'creative impulses' that aim 'Self-realization' which can be fruited as creative transformation of personality and as creative transformation in the relation with the world. 'Creative impulses', which often can be experienced as instinctive impulse or emotional suffering unless ego realizes the meaning, reveal the meaning in dreams or visions through 'Imago' and 'Symbol'.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.4
• /
• pp.11-22
• /
• 2017

A plaza represents the identity of a city, and that reveals a plaza's importance. Gwanghwamun Plaza and Seoul Plaza are two representative plazas where the citizens can freely express their opinions. Many major plazas in the center of Seoul were built under the Japanese occupation. Among these, the plaza of Joseon Bank has different characteristics than Gwanghwamun Plaza and Seoul Plaza. Even though this plaza was built in the center of the commercial, administrational, and cultural district during the Japanese colonial period, the research on this plaza has been limited. This study was conducted to verify the features of this plaza by analyzing its construction and transformation during the Japanese colonial period. The study's results outline how the plaza was constructed by the Japanese administration. The intention of the government is shown by the fact that it purchased land parcels and held a design competition. In the 1910s, the government purchased seven parcels of land during the expansion of roads as the place for the plaza. During the late 1930s, the government accepted a traffic circle to regulate the traffic and eliminate the conflict between crossing movements. In 1939, a fountain was built in the plaza's center, and its design was selected through a design competition. It was planned as a square, but gradually turned into a rotary. Furthermore, the plaza was a landmark and symbol of the power and modernity of Japan. As the main modal point of public transportation, the plaza became surrounded with largescale Western-style buildings, commercial advertising, and neon signs. The plaza became a place where people could experience the modern city. These spectacular displays showed that Japanese imperialism was perceived as a strange and peculiar landscape to the majority of Korean citizens. This study investigates the history and characteristics of the plaza, focusing on its beginning as well as the transformation of its form. As to the limitations of the study, it does not consider political and economic contexts within the transformation of Seoul and in relation to this plaza. Instead, that research remains for a future study.