• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2172-2194
• /
• 2023

A variational nodal method (VNM) with unstructured-mesh is presented for solving steady-state and dynamic neutron diffusion equations. Orthogonal polynomials are employed for spatial discretization, and the stiffness confinement method (SCM) is implemented for temporal discretization. Coordinate transformation relations are derived to map unstructured triangular nodes to a standard node. Methods for constructing triangular prism space trial functions and identifying unique nodes are elaborated. Additionally, the partitioned matrix (PM) and generalized partitioned matrix (GPM) methods are proposed to accelerate the within-group and power iterations. Neutron diffusion problems with different fuel assembly geometries validate the method. With less than 5 pcm eigenvalue (k_eff) error and 1% relative power error, the accuracy is comparable to reference methods. In addition, a test case based on the kilowatt heat pipe reactor, KRUSTY, is created, simulated, and evaluated to illustrate the method's precision and geometrical flexibility. The Dodds problem with a step transient perturbation proves that the SCM allows for sufficiently accurate power predictions even with a large time-step of approximately 0.1 s. In addition, combining the PM and GPM results in a speedup ratio of 2-3.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.305-314
• /
• 2017

Ocean wave energy harvesting is still too expensive despite developing a variety of wave energy converter (WEC) devices. For the cost-effective wave energy harvesting, it can be an effective measure to use existing breakwaters or newly installed breakwaters for both wave control and energy harvesting purposes. In this study, we investigated the functionality of both breakwater and wave-power generator for the oscillating water column (OWC)-type wave energy converter (WEC) installed in a pneumatic floating breakwater, which was originally developed as a floating breakwater. In order to verify the performance of the breakwater as a WEC, the air flow velocity from air-chamber to WEC has to be evaluated properly. Therefore, air flow velocity, wave transformation and motion of floating structure was numerically implemented based on BEM from linear velocity potential theory without considering the compressibility of air within the chamber. Air pressure, meanwhile, was assumed to be fluctuated by the motions of structure and the water level change within air-chamber. The validity of the obtained values can be determined by comparing the previous results from the numerical analysis for different shapes. Based on numerical model results, wave transformation characteristics around OWC system mounted on the fixed and floating breakwaters, and motions of the structure with air flow velocities are investigated. In summary, all numerical results are almost identical to the previous research considering air compressibility. Therefore, it can be concluded that this analysis not considering air compressibility in the air chamber is more efficient and practical method.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.18
• /
• pp.7757-7761
• /
• 2014

Aim: To report long term outcomes of laser conization for high grade cervical intraepithelial neoplasia (CIN) in Thai women. Materials and Methods: A retrospective cohort study was conducted in patients undergoing laser conization due to abnormal cervical cytology suggesting neoplasia during 1989 to 1994 and having follow-up data until December 2010. Conization was performed under colposcopy using a 0.5-mm $CO_2$ laser beam with power density of $18,000-20,000watts/cm^2$, and the surgical base was vaporized using a low power defocused beam. The follow-up protocol included cervical cytology and colposcopy. Long term outcome measures were failure rate (persistence and recurrence), post-conization status of transformation zone, and obstetric outcomes. Results: Of 104 patients undergoing conization, 71 had therapeutic conization for high grade CIN and were followed up for a median time of 115 (range 12-260) months. There was one case of persistent and one of recurrent disease comprising a failure rate of 2.8%. The post treatment transformation zone was well visualized in 68.3% of 63 patients with an intact uterus. Sixteen patients achieved 25 pregnancies; none had second trimester miscarriage. The obstetric outcomes were unremarkable. Conclusions: Laser conization under colposcopic visualization for the treatment of high grade CIN in Thai women has a low failure rate of 2.8%. The post-conization transformation zone could not be evaluated completely in approximately 30% of cases; therefore the follow-up protocol should include both cytology and colposcopy. Obstetric outcomes are not adversely affected by this therapeutic procedure.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.804-810
• /
• 2002

The code division multiple access(CDMA) system capacity is limited by the amount of interference of the system. To reduce the unnecessary interference, this paper proposes optimized cell identification codes for site selection diversity transmission(SSDT) power control in wideband code division multiple access system of third generation partnership project(3GPP). The main objective of SSDT power control is to transmit on the downlink from the primary cell, and thus reducing the interference caused by the multiple transmission. In order to select a primary cell, each cell is assigned a temporary identification(ID) and user equipment(UE) periodically informs a primary cell ID to the connecting cells during soft handover. The non-primary cells selected by UE do not transmit the dedicated physical data channel(DPDCH) to reduce the interference. A major issue with the SSDT technology is the impact of uplink symbol errors on its performance. These errors can corrupt the primary ID code and this may lead to wrong decoding in the base station receivers. The proposed SSDT cell ID codes are designed to minimize the problem and to be easily decoded using simple fast Hadamard transformation(FHT) decoder.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.5
• /
• pp.383-390
• /
• 2008

The SCR in Static Transfer Switch (STS) is used for reliability improvement of important load's power supply in industry field. However an average of 2% fault in thyristor(SCR) occurs, so that the attached mechanical switch is paralleled with SCR's both end points and SCR operates only during the $12{\sim}208$[mS] before operation of the mechanical switch. Also, an ISC (Ideal State Conditioning Interlock Device) - STS system that two power supply paths may not be thrown at the same time is developed to remove the overlap section perfectly when a short or earth fault is generated in one system. This method has reduced the fault rate remarkably through the reduction of SCR's fatigue degree by using SCR in conversion operation corresponding to 0.89 times a year. Also, in case of fault generations, it does not affect to supply power to the load, therefore it contributes to the promotion of reliability in the power supply.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.6
• /
• pp.128-134
• /
• 2009

In this paper, we propose a new lumped Wilkinson power divider which is designed to have lower quality-factors in the impedance transformation. Therefore, it can provide wider bandwidth than the conventional one. Moreover, the proposed power divider consists of fewer number of elements so that the circuit size can be further reduced. Simulation results show that the proposed lumped power divider allows a 50% wider bandwidth in the return loss and isolation performance. The conventional and new Wilkinson power was designed and fabricated based on the derived equations at 2.0 GHz. In the measurement, the proposed divider achieved a good performance with an input return loss ($S_{11}$) of -23.0 dB, an isolation ($S_{23}$) of -29.0 dB and an insertion loss ($S_{21}$) of -3.12 dB at the design frequency with wider bandwidth than the conventional one.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.6
• /
• pp.43-48
• /
• 2008

Power consumption during test can be much higher than that during normal operation since test vectors are determined independently. In order to reduce the power consumption during test process, a new BIST(Built-In Self Test) architecture is proposed. In the proposed architecture, test vectors generated by an LFSR(Linear Feedback Shift Resister) are transformed into the new patterns with low transitions using Bit Generator and Bit Dropper. Experiments performed on ISCAS'89 benchmark circuits show that transition reduction during scan testing can be achieved by 62% without loss of fault coverage. Therefore the new architecture is a viable solution for reducing both peak and average power consumption.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.1972-1981
• /
• 2022

A typical ferritic/martensitic (F/M) steel sheet was subjected to pulsed laser surface remelting (LSR) and corrosion test in lead-bismuth eutectic (LBE) at 550 ℃. There present two modification zones with distinct microstructures in the LSRed specimen: (1) remelted zone (RZ) consisting of both bulk δ-ferrite grains and martensitic plates and (2) heat-affected zone (HAZ) below the RZ, mainly composed of martensitic plates and high-density precipitates. Martensitic transformation occurs in both the RZ and the HAZ with the Kurdjumov-Sachs and Nishiyama-Wassermann orientation relationships followed concurrently, resulting in scattered orientations and specific misorientation characteristics. Hardnesses of the RZ and the HAZ are 364 ± 7 HV and 451 ± 15 HV, respectively, considerably higher than that of the matrix (267 ± 3 HV). In oxygen-saturated and oxygen-depleted LBE, thicknesses of oxide layers developed on both the as-received and the LSRed specimens increase with prolonging corrosion time (oxide layers always thinner under the oxygen-depleted condition). The corrosion resistance of the LSRed F/M steel in oxygen-saturated LBE is improved, which can be attributed to the grain-refinement accelerated formation of dense Fe-Cr spinel. In oxygen-depleted LBE, the growth of oxide layers is very low with both types of specimens showing similar corrosion resistance.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.6
• /
• pp.282-287
• /
• 2009

$Ni_xFe_{100-x}$ films with a thickness of about 100nm were deposited on Si(100) substrates at room temperature by a DC magnetron co-sputtering using Fe and Ni targets. Compositional, structural, electrical and magnetic properties of the films were investigated. $Ni_{67}Fe_{33}$, $Ni_{55}Fe_{45}$, $Ni_{50}Fe_{50}$, $Ni_{45}Fe_{55}$, $Ni_{40}Fe_{60}$ films are obtained by increasing the sputtering power of the Fe target. The films of x < 55 have BCC structure and show the phase transformation after annealing at the range of $300{\sim}450^{\circ}C$ for 2 h. On the other hand, the films of x < 50 have the mixed crystalline phases of BCC and FCC after the annealing treatment. The saturation magnetization was decreased initially by the phase transformation effect but then increased again after annealing at $450^{\circ}C$ due to the grain growth and crystallization of BCC phases.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.4
• /
• pp.124-139
• /
• 2015

Unlike other mountains in Korea, Seoul Namsan(南山), which is one of the landmarks that represent the country's capital city, is perceived as a city park. This article aims to study the process that Namsan became a park and the transformation of its place in Korean Emperor and Japanese colonial period. The serial changes in Namsan, in early modern era, mean that is associated with the colonial urbanization and the rule of space by Japan. The stages of Waeseongdae Park(倭城臺公園), Gyeongseong Park(京城公園) and Hanyang Park(漢陽公園) under the leadership of Japan, due to the extension of Japan's power, Namsan has became the park. Here, the park has become a strategic tool of other's occupying Hanseongbu(漢城府), a capital city. The process that Namsan became a park dose not mean making the space for recreation and rest, but is an excuse for using the land. Since then, Namsan's parks barely fulfilled its original function as park as it was transformed into a shrine, Gyeongseong Jinjya(京城神社), for Japanese warriors or was incurred upon by Joseon Singung(朝鮮神宮), which was established as a facility to govern Korea, sometimes is gradually and sometimes is mercilessly. The fact, transplantation of Japanese culture and replacement as ruler space, is another aspect of occupying and govern place. In other words, while the process that Namsan became a park is the way of establishing Japanese force, the transformation of its place show a colonial rule as an aspect of space. Meanwhile, in spite of transformation to shrine, Namsan became accepted as a park for a long time, because of the forest of Namsan. Japan managed forest as a sacred place. It is also a result of the Japanese rule of space.