• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.2
• /
• pp.31-42
• /
• 1975

In this paper is introduced a new method of constructing a grounded.ungrounded FDNR (Frequency Dependent Negative Resistance) pair. Open circuit village transfer functions of any order are readily realized using the pairs with RC elements and CGIC's whose admittance ronversion functions are proportional to s3. This method simplifies the realization of transfer functions of higher order, The transfer function of fifth order haying low- pass filter characteristics is realized by this method. The measured frequency characteristics show satisfactory results.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.3
• /
• pp.36-41
• /
• 1974

Two realigation procedures of any open-circuit transfer functions are presented through the use of genera1ized immitance converters composed of two operational amplifiers and passive elements. The fast precedure is to select the admittance conversion, h(s), to be k/s , and the second one to be k/s. The merit of the second procedure is the elimination of capacitors in passive networks, however, requires more CGIC's than the first. The second-order transfer function is realiged in the two methods under discussion to find that the sensitivity of Q factor and the undamped oscillation frequency to the variation of circuit elements. The first procedure proved to be favorable from the view point of sensitivities.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1352-1355
• /
• 1996

The control of diamond turning is usually achieved through a laser-interferometer feedback of slide position. If the tool post is rigid and the material removal process is relatively static, then such a non-collocated position feedback control scheme may surface. However, as the accuracy requirement gets tighter and desired surface contours become more complex, the need for a direct tool-tip sensing becomes inevitable. The physical constraints of the machining process prohibit any reasonable implementation of a tool-tip motion measurement. It is proposed that the measured force normal to the face of the workpiece can be filtered through an appropriate admittance transfer function to result in the estimated depth of cut. This can be compared to the desired depth of cut to generate the adjustment control action in addition to position feedback control. In this work, the design methodology on the admittance model-based control with a conventional controller is presented. The recursive least-squares algorithm with forgetting factor is proposed to identify the parameters and update the cutting process in real time. The normal cutting forces are measured to identify the cutting dynamics in the real diamond turning process using the precision dynamometer. Based on the parameter estimation of cutting dynamics and the admittance model-based nanodynamic control scheme, simulation results are shown.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.49-52
• /
• 1996

The control of diamond turning is usually achieved through a laser-interferometer feedback of slide position. The limitation of this control scheme is that the feedback signal does not account for additional dynamics of the tool post and the material removal process. If the tool post is rigid and the material removal process is relatively static, then such a non-collocated position feedback control scheme may surfice. However, as the accuracy requirement gets tighter and desired surface contours become more complex, the need for a direct tool-tip sensing becomes inevitable. The physical constraints of the machining processprohibit any reasonable implementation of a tool-tip motion measurement. It is proposed that the measured force normalto the face of the workpice can be filterd through an appropriate admittance transfer function to result in the estimated depth of cut. This can be compared to the desired depth of cut to generate the adjustment cotnrol action in addition to position feedback control. In this work, the design methodology on the admittance model-based control with a conventional controller is presented. Based on the empirical data of the cutting dynamics, simulation results are shown.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.6
• /
• pp.67-79
• /
• 1982

The stability of general pulse-width modulation system with Gaussian random disturbance was discussed . General system is divided into nonlinear and linear elements using the conventional describing function method. The concept of the equivalent admittance was used to find the transfer characteristic of the nonlinear element of the system. In this paper the self-sustained oscillation condition in the autonomous system was derived and the results was analyzed with computer simulation.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.154-160
• /
• 1996

The control of diamond turning is usually achieved through a laser-interferometer feedback of slide position. The limitation of this control scheme is that the feedback signal does not account for additional dynamics of the tool post and the material removal process. If the tool post is rigid and the material removal process is relatively static, then such a non-collocated position feedback control scheme may surfice. However, as the accuracy requirement gets tighter and desired surface cnotours become more complex, the need for a direct tool-tip sensing becomes inevitable. The physical constraints of the machining process prohibit any reasonable implementation of a tool-tip motion measurement. It is proposed that the measured force normal to the face of the workpiece can be filtered through an appropriate admittance transfer function to result in the estimated dapth of cut. This can be compared to the desired depth of cut to generate the adjustment control action in additn to position feedback control. In this work, the design methodology on the admittance model-based control with a conventional controller is presented. The recursive least-squares algorithm with forgetting factor is proposed to identify the parameters and update the cutting process in real time. The normal cutting forces are measured to identify the cutting dynamics in the real diamond turning process using the precision dynamoneter. Based on the parameter estimation of cutting dynamics and the admitance model-based nanodynamic control scheme, simulation results are shown.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.6
• /
• pp.1-8
• /
• 1982

In this paper a new analytic method for Ladder networks by weighted tree is proposed. In contrast to conventional tree concept that represents only information structure, in this paper, a tree with hierarchical structure is established by giving wei체t of impedance Z and admittance Y to branch and representing each node of its branch as a pair of voltage and current. Then, by defining generation level from tree structure and by parsing between standand level and arbitrary level, driving point impedance, transfer function and transfer impedance are simultaneously obtained instead of complex calculation method by inspection. The validity of this method is proved by the reciprocal theorem and this method is applied to four-terminal constants and the feedback network.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.4
• /
• pp.935-946
• /
• 2014

This paper investigates the noise transmission performance of industrial mufflers widely used in ships based on the CAE modeling and simulation. Since the industrial mufflers have very complicated internal structures, the conventional Transfer Matrix Method (TMM) is of limited use. The CAE modeling and simulation is therefore required to incorporate commercial softwares: CATIA for geometry modeling, MSC/PATRAN for FE meshing and LMS/SYSNOISE for analysis. Main sources of difficulties in this study are led by complicated arrangement of reactive elements, perforated walls and absorption materials. The reactive elements and absorbent materials are modeled by applying boundary conditions given by impedance. The perforated walls are modeled by applying the transfer impedance on the duplicated node mesh. The CAE approach presented in this paper is verified by comparing with the theoretical solution of a concentric-tube resonator and is applied for industrial mufflers.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.11
• /
• pp.88-98
• /
• 1993

In this paper, the effective permittivity in the piezoelectric material is numerically obtained and greens function is derived from that. It is shown that the admittance and the transfer function of an interdigital transducer is represented by electrostatic charge distribution using Quasi-static approximation. To prove the validity of the quasi-static approximation, numerical results for the uniform IDT of a filter mounted on 128 $^{\circ}$ rotated Y-cut X-propagating Lithium Niobate are compared with the measured ones.

• Journal of KSNVE
• /
• v.8 no.5
• /
• pp.807-813
• /
• 1998

Transmission loss of the simple expansion chamber with multiple inlet and outlet ports is obtained. Transfer matrices which represent the relation between the power variables(pressure and velocity) of inlets and outlets depend on the input relatons as well as the acoustic system parameters(i.e. geometry of the chamber, wall admittance, etc.). The analysis has been performed analytically, including the effects of higher order modes for the 2-inlet/1-outlet, 1-inlet/2-outlet and 2-inlet/2-outlet systems. This study yeilds that phase difference between the inlet ports can significantly increase the transmission loss in low frequency range.