• Corrosion Science and Technology
• /
• v.11 no.3
• /
• pp.71-76
• /
• 2012

Computational fluid dynamics (CFD) is nowadays a powerful and reliable tool for simulating different flow processes and temperature. CFD is used to analyze the various pot geometries and operative variables in 55% Al-Zn pot of CGL. In this research, different strip velocities were assumed and then shown the flow pattern in the pot that was similar in the different strip velocities. Temperature distribution in the pot depended on inductors and inlet strip temperature at the steady condition. Generation of dross particles and transport models were considered to describe dross particles evolution inside the pot. In order to observe dross influence by scrap location, dross particles were generated upon the sink roll. Floating time of dross particles is different by scraper locations above the sink roll.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.702-709
• /
• 2008

In this paper, Developed u-Marketing system prototype based on location base service could offer because this treatise combines personalized and mobility. It is u-Marketing system takes advantage of u-LBS base skill to support marketing that is old Mobile more efficiently u-marketing call center. If it was marketing in spam way that marketing to be Mobile passes public information contents one-sidely to unspecificness many customers so far, u-Marketing system takes advantage of u-LBS base skill-marketing system is u-marketing system of location base that can take advantage of subscriber's location information through portable phone or GPS with transfer telegraph operator adulterating member's distinction of sex, age, residential district, profession and support satisfied article ordered style Target marketing.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.539-547
• /
• 2012

Increasing the mode transfer volume between public transportation modes has known to be necessary for efficiency improvement of public transportation system operation and it is also found to be important to have relevant transfer point selection with reflection of current travel pattern. This study is in regards to providing a selection guideline for the location of transfer point between public transport modes. This case study has been carried out for Daegu Metropolitan City especially for public transportation users behaviour by analysis of daily usage of transportation card to identify the transfer travel pattern. A cluster analysis was applied to categorize the pattern of transfer stop which induces many users and a discriminant analysis also utilized for grouping the stops by number of transfer trip. This research produces the estimation result of transfer volume for urban railway system no.3 in Daegu City which is currently under construction. In addition, the locations of transfer center has also been proposed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.12
• /
• pp.1078-1087
• /
• 2003

Kimchi refrigerator is a household electric appliance developed with the wholly domestic technology for maturing and keeping kimchi. However, the principle of keeping is not yet revealed obviously. This numerical study has been conducted to investigate the flow and heat transfer characteristics in a kimchi refrigerator. The effects of arrangement variation of a evaporation tube are examined. Also, the heat transfer characteristics through the insulation material are discussed in detail. The flow and temperature field was simulated using the commercial code of CFX-5.3. A natural convection flow is formed through about 5/6 region from the bottom within the keeping space and accordingly, the 90% region of kimchi containers satisfies the temperature requirement with 0$\pm$0.5$^{\circ}C$. The stagnant flow exists in the upper 1/6 region of the keeping space and accordingly, the stratified high temperature distributions appear in the upper region of kimchi containers. The upward shift of the start location of a evaporation tube improves the temperature concentration toward $0^{\circ}C$ but the pitch variation is of no effect. The heat fluxes on the insulation surfaces show two-dimensional distributions with being higher toward the center. Through the variation of insulation thickness, 3.5% saving of insulation material is obtained under the same heat transfer rate.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.474-478
• /
• 1992

The non-rational transfer function of a Bernoulli-Euler beam, as an important component of a flexible structure, is analyzed. The true pattern of zeros of that transfer function is investigated as a function of sensor and actuator seperation. Translational displacement sensors are used for two cases in which a force input and a moment input are seperately applied. When the displacement sensor is located at a certain point, the first pair of zeros on the real axis of the s-plane arrive at the origin and cancel the rigid-body mode. The location of the translational displacement sensors on the beamat which the rigid-body mode of the beam is unobservable is analyzed as the center of percussion and is uniquely located for each case. If sensor is moved beyond such a point, a pair of zeros appear on the imaginary axis and move away from the origin along the imaginary axis of the s-plane.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.5S
• /
• pp.1657-1665
• /
• 2000

Mobile agents based e-commerce system has many advantage than traditional e-commerce-information gathering on goods, price settlement and payment, delivery of the goods purchased, and so on. However, due to the security vulnerability that stems from mobile agent's mobility, mobile agents based e-commerce system has additional security problems. Therefore, in order to do e-commerce securely in th system, first of al the security issues on mobile agents must be addressed. It this paper, we propose a mobile agent transfer protocol that provides confidentiality and integrity of mobile agent in transit and mutual authentication for communicating hosts. We further show the security of the protocol against many possible attacks. Also, we suggest the location management mechanism of mobile agents based on the trust center. This mechanism is capable of finding their locations transparently and detecting mobile agent clones.

• Archives of Plastic Surgery
• /
• v.32 no.5
• /
• pp.573-581
• /
• 2005

Breast cancer is the second leading cause of death in woman. Unfortunately, the frequency of breast cancer and mastectomy are increasing in Korea. This paper introduces the breast reconstruction by use of pectoralis major muscle transfer with breast implant for small size defect after skin sparing mastectomy for more satisfaction. We reviewed 24 consecutive patients who underwent breast reconstruction by pectoralis major muscle transfer with implant and only breast implant in Dong-A University from April 2002 to March 2004. The patient's age ranged between 29 and 54 years with mean of 42.3 years. We used pectorals major muscle transfer with breast implant in 12 patients and breast implant alone in 12 patients as control. The follow-up period of patients ranged from 10 months to 3 years with mean of 18.5 months. The points of comparison with control group reconstructed by breast implant alone were doctor and patient satisfaction score, operation time, duration of admission, amount of drainage, complication and satisfaction according to mass location. In conclusion, there is no difference with control group in the point of operation time, mount of drainage, duration of admission. And there is higher level of doctor's and patient's satisfaction in group reconstructed by pectoralis major muscle transfer with breast implant than implant only group. Especially, pectoralis major muscle transfer with breast implant was especially necessary for the defect in upper lateral quadrant of the breast to get more satisfaction. The advantage of pectoralis major muscle transfer with breast implant is prevention of the protruding and palpability of implant and aesthetically satisfactory result by intraoperative modification of breast shape.

• Nuclear Engineering and Technology
• /
• v.31 no.5
• /
• pp.486-497
• /
• 1999

The local heat transfer coefficient is experimentally investigated for the reflux condensation in a countercurrent flow between the steam-air mixture and the condensate, A single vertical tube has a geometry which is a length of 2.4m, inner diameter of 16.56mm and outer diameter of 19.05mm and is made of stainless steel. Air is used as a noncondensible gas. The secondary side has a shape of annulus around vertical tube and the lost heat by primary condensation is transferred to the coolant water. The local temperatures are measured at 11 locations in the vertical direction and each location has 3 measurement points in the radial direction, which are installed at the tube center, at the outer wall and at the coolant side. In three different pressures, the 27 sets of data are obtained in the range of inlet steam flow rate 1.348∼3.282kg/hr, of inlet air mass fraction 11.8∼55.0%. The investigation of the flooding is preceded to find the upper limit of the reflux condensation. Onset of flooding is lower than that of Wallis' correlation. The local heat transfer coefficient increases as the increase of inlet steam flow rate and decreases as the increase of inlet air mass fraction. As an increase of the system pressure, the active condensing region is contracted and the heat transfer capability in this region is magnified. The empirical correlation is developed by 165 data of the local heat transfer. As a result, the Jacob number and film Reynolds number are dominant parameters to govern the local heat transfer coefficient. The rms error is 17.7% between the results by the experiment and by the correlation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.195-207
• /
• 2017

Since the smart phone was first introduced, the amount of mobile traffic has increased explosively. The OTT service with personal broadcasting and TV contents and the number of users have been increased in wired network, and there are needs to expand the OTT service to mobile network. In the case of the OTT service in mobile network, the relative small and finite resource may cause the overload of the network due to the massive and high transfer rate. In this paper, we consider a future situation of the OTT user services in the cellular network and propose a novel D2D communication scheme for location-based OTT service, which can reduce and distribute the amount of video traffics. To effectively handle the traffic of OTT services, we propose D2DS and LCS functional blocks in EPC network, which can provide location-based service and D2D management. And, we suggest additional procedures for the location-based service of both content provider and contents receiver UEs with the operation of the proposed D2DS and LCS function block.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2162-2173
• /
• 2021

In this paper, the coupling of fine-mesh computational fluid dynamics (CFD) thermal-hydraulics (TH) code and neutronics code is achieved using the Ansys Fluent User Defined Function (UDF) for code development, including parallel meshing mapping, data computation, and data transfer. Also, some CFD schemes are designed for mesh mapping and data transfer to guarantee physical conservation in the coupling computation. Because there is no rigorous research that gives robust guidance on the various CFD schemes that must be obtained before the fine-mesh coupling computation, this work presents a quantitative analysis of the CFD meshing and mapping schemes to improve the accuracy of the value and location of key physical prediction. Furthermore, the effect of the sub-pin scale coupling computation is also studied. It is observed that even the pin-resolved coupling computation can also create a large deviation in the maximum value and spatial locations, which also proves the significance of the research on mesh mapping and data transfer for CFD code in a coupling computation.