• International Journal of Highway Engineering
• /
• v.9 no.2 s.32
• /
• pp.77-87
• /
• 2007

Traffic accidents on freeway are occurred by various factors, and driver inattention is one of the most important factors causing traffic accidents. To warn drivers about unexpected dangerous events and diminish driver inattention problems, traffic safety facilities including warning and regulatory traffic signs; delineators; rumble strips are installed. In this study, the traffic safety effect of shoulder rumble sips were investigated using "Comparison Croup (C-G)" method developed by Hauer. Through the analyses, it was found that numbers of run-off-the road crashes were reduced as 2.43 crashes per year after the installation of shoulder rumble strips on the freeway. Based on the analysis results in this study, it was concluded that shoulder rumble strips on the freeway contribute to reduce traffic accidents, especially run-off-the road crashes.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.35-43
• /
• 2012

The Government is implementing the safety measures for pedestrian in living zone to decrease the traffic accident casualties in half. It is urgently to study the guideline because it contains to make the guideline of a median strip in City to prevent the violation of central line and jaywalking on the main contents. So, this study analyzed the pedestrian accidents and the violation of central line, and studied the type of a median strip, the installation guideline through studying the minimum crossing. Consequently, this study found out that a median strip which revised the attention inducement stick to decrease jaywalking could not have the strong prevention function of a crash barrier, so if it happens separation after the collision between vehicles, it induced the secondary accidents, and could take negative effects on traffic safety. In consideration of driving safety, this study analyzed that if it installs a median stirp, it has to ensure one meter, and such a thing could prevent the separation of lane or damage of facilities. However, if it is hard to ensure the space because of narrow road width, it could install a median strip in case of installing the road surface mark 0.5m. And the installation of the attention inducement stick or a median strip on the central line could be possible to induce the violation of central line, thus it is desirable not to install only anythings but also raised pavement markers.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.192-202
• /
• 2021

In the past, various studies have been conducted on safety facility installation standards and road safety indices. But there are limitations in applying them to the field, such as using many survey items and variables that are difficult to use. Therefore, this study attempted to develop road safety judgment indicators considering the applicability of the research results and to prepare criteria for installing safety facilities. As part of the study, data of related systems were reviewed, and the use of variables already in use was figured out. Furthermore, the road safety judgment indicators reflecting traffic, road, and accident factors were developed through correlation and factor analysis. Later, the criteria score for determining the installation of safety facilities was derived through cluster analysis. The analyses suggested, that the installation judgment criterion score at the intersection was lower than that of the single road(crosswalk), and the road risk at the intersection was higher.

• Journal of the Korean Society of Safety
• /
• v.26 no.2
• /
• pp.89-98
• /
• 2011

The traffic accidents at a construction site, which happen due to construction vehicles' frequent access to a construction site, its subsequent conflicts with ordinary vehicles and pedestrians, and inappropriate installation & management of traffic security facilities, have not many proportions in all traffic accidents, but obviously, the accident damage is quite serious when comparing the level of the fatal per one accident. This research conducted an analysis of traffic accident injury severity using Ordered Probit Model in relation to 241 traffic accident cases that occurred caused by construction sites among the traffic accidents that took place in Seoul and Gyeoggi-do region for two years from 2006 until 2007. As a result, the significant variables enough to explain traffic accident injury severity were analyzed to be the state of road surface, linear shape of an accident spot & whether the damaging car belongs to the vehicle for construction, and whether vehicles have access to a construction site at the time of an accident. Through this, this research found out some fact as follows: first, there need to be more aggressive management of the vehicles for construction and a year-round placement of the manpower who can control vehicular access to a construction site. Second, it is necessary to get drivers to recognize the fact that there exists a construction site on the construction section which is on the border of curved roads in advance to prevent a traffic accident, helping to reduce socioeconomic loss & costs incurred by a traffic accident.

• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.143-154
• /
• 2013

PURPOSES: Design of approach roads of rest areas in highway has many drawbacks such as geometric design elements. There has been traffic accidents occured in these approach roads of rest areas. Thus, design criteria is required in order to protect accidents from being occurred. In case of Korea, geometric structure design criteria of entry facilities, such as toll-gate, interchange, junction etc was established. However there are no presence in a detailed standards for geometric structure of the rest area which affiliated road facilities. METHODS: In this study, analytic on accidents was carried out in regards to the entry of geometric structure of resting areas by utilizing a sight survey and an investigation research of traffic accidents. The survey was targeting 135 general service areas. Collisions with physical channelization and safety facilities occurred due to speeding, rapid entry, and etc at the entrance nose section. At the entrance connector roads, accidents caused by speeding, negligence, over-operation of handle of drivers were main reason of accidents. Discriminant analysis were conducted about geometric elements to distinguish influencing factors for traffic accidents. the lengths and access angles of the entrance connector roads were regarded as to have the high relation with traffic accidents. RESULTS: After classifying the design section of resting areas' entry as well as derive design elements on each section, a speed measurement by targeting entry of rest areas and car behavior surveys were performed, then each element's minimum standard was derived through the analyses. According to the speeds at the starting/end point of entrance connector road, the range of the junction setting angle of the entrance connector road is defined as $12^{\circ}{\sim}17^{\circ}$ and the connector length model was suggested. CONCLUSIONS: Suggest improvement plans for existing rest areas that can be applied realistically. This should be corresponded to the standards of entry and exit of developed rest areas.

• Journal of KIBIM
• /
• v.12 no.2
• /
• pp.1-11
• /
• 2022

Road traffic accidents (RTAs) are the leading cause of accidental death among children. RTA reduction is becoming an increasingly important social issue among children. Municipalities aim to resolve this issue by introducing "Smart Pedestrian Crosswalks" that help prevent traffic accidents near children's facilities. Nonetheless such facilities tend to be installed in relatively limited number of areas, such as the school zone. In order for budget allocation to be efficient and policy effects maximized, optimal location selection based on machine learning is needed. In this paper, we employ machine learning models to select the optimal locations for smart pedestrian crosswalks to reduce the RTAs of children. This study develops an optimal location index using variable importance measures. By using k-means clustering method, the authors classified the crosswalks into three types after the optimal location selection. This study has broadened the scope of research in relation to smart crosswalks and traffic safety. Also, the study serves as a unique contribution by integrating policy design decisions based on public and open data.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.7 no.2
• /
• pp.23-37
• /
• 2001

Marine environment has been polluted and damaged by many sources such as industrial waste, natural seepage, oil spill and offshore production etc. Among them, oil spill from oil tankers is one of most harmful sources to marine lives as its input amount is huge at a limited area for short period. In Korea, the port of Yeosu is known to be very vulnerable to oil spill with large amount of petroleum transported across the harbour. In this regards, the author analyzed and reviewed marine environment and appropriate response to marine oil spill at this area. For these purposes, oceanographic and meteorologic features as well as regional characteristics of harbor facilities, shipping routes, marine traffic and fisheries were investigated, also traffic densities were analyzed in order to check marine accident probabilities making direct observations for 72 hours visual1y and by portable radar.

• Journal of Navigation and Port Research
• /
• v.30 no.1 s.107
• /
• pp.35-43
• /
• 2006

This study suggests strategies to prevent traffic accidents by utilizing impact factors per each cluster and the typical patterns of 81 cities based on the statistical analysis of the data concerning the TCI which was developed from the partnership of the Traffic Safety Authority and the Green Traffic Movement Corporation in 2002 and 2003. The Principal Component Analysis and Cluster Analysis on impact factors and TCI result in 4 components and 4 clusters. Also as the results of Stepwise Multiple Regression Analysis examining the relationship between impact factors and TCI, R2 values of these models show high to all clusters. According to the results, we suggest strategies to prevent traffic accidents per cluster concretely and it is necessary to analyze how effective the invested facilities are in reducing traffic accidents in the future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.162-164
• /
• 2022

Efforts are being made to prevent traffic accidents within the child protection zone. Efforts are being made to prevent accidents by enacting safety facilities and laws to prevent traffic accidents in the school zone. However, traffic accidents in school zones continue to occur. If the driver can know the situation in the child protection zone in advance, accidents can be reduced. In this paper, we design a camera that eliminates blind spots in school zones and a number recognition camera system that can collect pre-traffic information. Design a LIDAR system that recognizes vehicle speed and pedestrians. Design an LED guidance system that delivers information to drivers without smart devices. We study time series analysis and artificial intelligence algorithms that collect and process pedestrian and vehicle information recognized by cameras and LIDAR. In the artificial intelligence traffic accident prevention system learned by deep learning, before entering the school zone, the school zone information is sent to the driver through the Force Push Service and the school zone information is delivered to the driver on the LED sign. try to reduce accidents.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.29-35
• /
• 2018

According to the Global Wind Report of the Global Wind Energy Council (GWEC) in 2017, global wind power electricity generation capacity has been dramatically developing from 23,900 MW in 2001 to 486,790 MW in 2016. However, wind power generation in South Korea accounts for only 0.2 % of total power generation. Nonetheless, electricity production by wind power generation is soon expected to reach the grid parity where the cost of generating electricity by wind power is equal to the cost of fossil fuels such as oil. In this study, we analyzed the criteria of vessel traffic and fishing activities of major offshore wind farms in Europe where 88 % of the offshore wind power facilities are located. Finally, we suggest critical considerations based on the analysis.