• The Korean Journal of Ceramics
• /
• 제2권1호
• /
• pp.1-10
• /
• 1996

Transparent conducting $SnO_2$-based thin films have been coated on float substrates such as fused quartz, and ceramic fiber cloths such as the Nexel and E-glass cloth from tin alkoxides by the sol-gel technique. Also, thin films of alternating layers of $SnO_2$ and $SiO_2$ have been fabricated by dip coating. The sheet resistance and average visible transmittance of the films were investigated in the aspect of the applications as transparent electrodes such as liquid crystal displays, photo-detectors and solar cells. The Nextel and E-glass cloths coated with antimony-doped tin oxide (ATO) had sheet resistance of as low as $20 \;ohm/{\Box}$ and $120ohm/\;{\Box}$, respectively. The promotion effects of additives as $La_2O_3$ and Pt on the ethanol gas sensing properties of the films were investigated in the aspects of the applications as an alcohol sensor and a breath alcohol checker. Possible evidence of quantum well effects in the oxide multilayers of $SnO_2$ and $SiO_2$ was investigated.

• 한국재료학회지
• /
• 제30권7호
• /
• pp.338-342
• /
• 2020

Tin oxide (SnO₂) nanocrystals are synthesized by a thermal evaporation method using a mixture of SnO₂ and Mg powders. The synthesis process is performed in air at atmospheric pressure, which makes the process very simple. Nanocrystals with a belt shape start to form at 900 ℃ lower than the melting point of SnO₂. As the synthesis temperature increases to 1,100 ℃, the quantity of nanocrystals increases. The size of the nanocrystals did not change with increasing temperature. When SnO₂ powder without Mg powder is used as the source material, no nanocrystals are synthesized even at 1,100 ℃, indicating that Mg plays an important role in the formation of the SnO₂ nanocrystals at temperatures as low as 900 ℃. X-ray diffraction analysis shows that the SnO₂ nanocrystals have a rutile crystal structure. The belt-shaped SnO₂ nanocrystals have a width of 300~800 nm, a thickness of 50 nm, and a length of several tens of micrometers. A strong blue emission peak centered at 410 nm is observed in the cathodoluminescence spectra of the belt-shaped SnO₂ nanocrystals.

• 한국재료학회지
• /
• 제26권4호
• /
• pp.222-227
• /
• 2016

Tin oxides have been studied for various applications such as gas detecting materials, transparent electrodes, transparent devices, and solar cells. p-type SnO is a promising transparent oxide semiconductor because of its high optical transparency and excellent electrical properties. In this study, we fabricated p-type SnO thin film using rf magnetron sputtering with an SnO/Sn composite target; we examined the effects of various oxygen flow rates on the SnO thin films. We fundamentally investigated the structural, optical, and electrical properties of the p-type SnO thin films utilizing X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV/Vis spectrometry, and Hall Effect measurement. A p-type SnO thin film of $P_{O2}=3%$ was obtained with > 80% transmittance, carrier concentration of $1.12{\times}10^{18}cm^{-3}$, and mobility of $1.18cm^2V^{-1}s^{-1}$. With increasing of the oxygen partial pressure, electrical conductivity transition from p-type to n-type was observed in the SnO crystal structure.

• 마이크로전자및패키징학회지
• /
• 제28권1호
• /
• pp.61-66
• /
• 2021

SnO2는 3.6 eV를 갖는 반도체 물질로 광촉매 특성을 보유하고 있는 물질이다. 광촉매 특성을 극대화하기 위해 3차원 에어로겔 화를 통하여 높은 비표면적을 확보하고자 epoxide-initiated sol-gel method를 기반으로 하여 주석 산화물 에어로겔을 합성하였다. 좀더 향상된 비표면적을 구현하고자 합성공정 중 겔화전에 graphene oxide (GO) flake의 첨가를 통해 정렬된 기공구조와 결과적으로 높은 비표면적을 확보할 수 있었다. 0.5 wt%의 GO flake의 첨가로 에어로겔 복합체의 비표면적을 약 1.7배 향상시키는 결과를 도출하였다. 이렇게 향상된 비표면적을 기반으로 Rhodamine B 염료의 분해효과를 흡수광 intensity 변화를 관찰하여 정성적으로 광촉매 효율을 비교 분석하였다. 가장 높은 비표면적을 갖는 0.5 wt%의 복합체는 120분에 67.3%의 분해 효율을 확보하였다. 또한, GO를 첨가하지 않은 SnO2 에어로겔 보다 약 2배 향상된 reaction rate를 보유하였다.

• 한국표면공학회지
• /
• 제33권2호
• /
• pp.87-92
• /
• 2000

Transparent and electrical conducting tin oxide thin films were fabricated on soda lime silicate glass by thermal chemical vapour deposition technique. Thin films were deposition from mixtures of tetramethyltin (TMT) as a precursor, oxygen or oxygen containing ozone as an oxidant and 1,1,1,2-tetrafluoroethane as a doping material. Electrical properties of fabricated tin oxide films were changed depending on substrate temperature, and the amount of dopant. Resistivity of tin oxide films was reduced by doping fluorine or heat treatment. Thin films can be optimized at TMT flow rate of 8sccm, oxygen flow rate of 150sccm, 1,1,1,2-tetrafluoroethane floe rate of 300sccm and substrate temperature $380^{\circ}C$. In this conditions, the lowest resistivity of tin oxide films were $9$\times$10^{-4}$ $\Omega$cm.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.346.2-346.2
• /
• 2014

To use the GaN based light-emitting diodes (LEDs) as solid state lighting sources, the improvement of light extraction and internal quantum efficiency is essential factors for high brightness LEDs. In this study, we suggested the new materials system of a zinc tin oxide (ZTO) layer formed on blue LED epi-structures to improve the light extraction. ZTO is a representative n-type oxide material consisted of ZnO and SnO system. Moreover, ZTO is one of the promising oxide semiconductor material. Even though ZTO has higher chemical stability than IGZO owing to its SnO2 content this has high mobility and high reliability. After formation of ZTO layer on p-GaN layer by using the spin coating method, structural and optical properties are investigated. The x-ray diffraction (XRD) measurement results show the successful formation of ZTO. The photoluminescence (PL) and absorption spectrum shows that it has 3.6-4.1eV band gap. Finally, the light extraction properties of ZTO/LED chip using electroluminescence (EL) measurement were investigated. The experimental and theoretical analyses were simultaneously conducted.

• 한국진공학회지
• /
• 제5권1호
• /
• pp.54-61
• /
• 1996

Indium-tin oxide (ITO) films were deposited on the glass substrate by the reactive -ionized cluster beam deposition(ICBD) method. In the oxygen atmosphere, indium cluster formed through the nozzle is ionized by the electron bombardment and is accelerated to be deposited on the substrate. And tin is simultaneoulsy evaporated from the boron-nitride crucible. The chracteristics of films were examined by the X-ray photoelectron spectroscopy(XPS), glancing angle X-ray diffractrion(GXRD) and the electrical properties. were measured by 4-point-probe and Hall effect measurement system . From the XPS spectrum , it was found that indium and tin atoms combined with the oxygen to form oxide$(In_2O_3, SnO_2)$. In the case of films with high tin-concentration, the GXRD spectra show that the main $In_2O_3$ peak of (222) plane, but also sub peaks((440) peak etc.) and $SnO_2$ peaks were detected. From that results, itis concluded that the heavily dopped tin component (more than 14 at. %) disturbs to form $In_2O_3$(222) phase. Four-point-probe and Hall effect measurement show that, in the most desirable case, the transmittance of the films is more then 90% in visible range and its resistivity is $$\rho$=3.55 \times10^{-4}\Omega$cm and its mobility is $\mu$=42.8 $\textrm{cm}^2$/Vsec.

• 한국재료학회지
• /
• 제33권11호
• /
• pp.475-481
• /
• 2023

Recently, the electron transport layer (ETL) has become one of the key components for high-performance perovskite solar cell (PSC). This study is motivated by the nonreproducible performance of ETL made of spin coated SnO₂ applied to a PSC. We made a comparative study between tin oxide deposited by atomic layer deposition (ALD) or spin coating to be used as an ETL in N-I-P PSC. 15 nm-thick Tin oxide thin films were deposited by ALD using tetrakisdimethylanmiotin (TDMASn) and using reactant ozone at 120 ℃. PSC using ALD SnO₂ as ETL showed a maximum efficiency of 18.97 %, and PSC using spin coated SnO₂ showed a maximum efficiency of 18.46 %. This is because the short circuit current (Jsc) of PSC using the ALD SnO₂ layer was 0.75 mA/cm² higher than that of the spin coated SnO₂. This result can be attributed to the fact that the electron transfer distance from the perovskite is constant due to the thickness uniformity of ALD SnO₂. Therefore ALD SnO₂ is a candidate as a ETL for use in PSC vacuum deposition.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권1호
• /
• pp.7-12
• /
• 2013

$SnO_2$ (tin oxide) 박막은 물리적, 전기적 성질이 우수하여 첨단산업의 다양한 분야에서 널리 응용/개발되고 있다. 이의 응용대상은 다양한 센서, 윈드쉴드(windshield) 윈도우의 히팅 요소, 태양전지, flat panel diplay에서의 투명전극을 들 수 있다. 본 연구에서는 대면적 기판에 대한 APCVD 공정개발을 위하여 실험용 2세대 크기의 유리기판에 $SnO_2$ 박막증착 실험을 수행하였다. 증착 온도가 증가함에 따라 증착 두께가 두꺼워지고 이에 따라 면저항은 감소, 투과도는 감소, 연무도 (haze)는 증가함을 확인하였다. 증착을 위한 전구체인 $SnCl_4$의 유량이 증가함에 따라 증착 두께 역시 증가하고 이에 따라 면저항은 감소한다. 그러나 투과도와 연무도는 $SnCl_4$ 유량의 영향을 거의 받지 않는다는 것을 확인하였다.

• 공업화학
• /
• 제18권2호
• /
• pp.142-147
• /
• 2007

본 연구에서는 주형물질로 $C_{16}TMABr$을 이용하여 염기 조건하에서 메조세공을 갖는 산화주석을 졸-겔법으로 합성하였다. 메조세공 $SnO_2$의 합성 최적조건을 탐사하였으며, 얻어진 시료는 X선회절, 질소흡착 및 투과전자현미경 등으로 분석하여 특성을 조사하였다. 금전극과 백금히터 회로를 알루미나 기재상에 스크린 프린팅 법으로 코팅하고, 합성한 메조세공의 산화주석을 전극상에 접합시켜 하나의 유니트로 구성하였으며, 제작한 센서는 $350^{\circ}C$에서 1~10,000 ppm 농도범위의 메탄과 일산화탄소에 대하여 검지능력을 평가하였다. $SnO_2$ 상에 담지된 팔라듐량의 변화가 이들 측정가스의 검출에 미치는 영향도 검토하였다. 메조세공을 갖는 산화주석은 비다공성의 상용 산화주석에 비하여 동일한 측정 조건하에서 측정가스에 대해 보다 높은 감도를 나타낼 뿐 아니라 안정성이 있으면서도 빠른 응답속도를 보였다.