• Title/Summary/Keyword: Time-to-event

검색결과 2,368건 처리시간 0.032초

지진파(地震波)를 이용(利用)한 남한(南韓)의 지각구조(地殼構造) 연구(硏究) (A Study on the Crustal Structure of South Korea by using Seismic Waves)

  • 김상조;김소구
    • 자원환경지질
    • /
    • 제16권1호
    • /
    • pp.51-61
    • /
    • 1983
  • By using local earthquake data, the Korean crust model and travel-time tables were determined. The upper crustal earthquakes (Hongsung event and Ssanggyesa event) were considered as auxiliary information, and the lower crustal earthquakes (Uljin event and Pohang event) played an important role in determining model parameters. The possible existence of Low Velocity Layer (LVL) in the upper mantle was suggested by discrepancy in the arrival times of Sariwon earthquake which occurred below Moho discontinuity. Computer program for the determination of the model parameters was developed in order to screened out the optimum parameters by comparing the travel times of observed data with theoretical ones. We found that the discontinuities of Conrad, Moho, and upper and lower boundaries of LVL have their depth of 15, 32, 55 and 75 Km, respectively. The velocities of P-and S-wave in the layers between those discontinities were found to be (1) 5.98, 3.40 Km/sec (2) 6.38, 3.79 Km/sec (3) 7.95, 4.58 Km/sec (4) unknown (5) 8.73, 5.05 Km/sec, respectively from the top layer. Travel-time tables were also computed for the inter-local earthquakes which have their direct wave paths above the LVL.

  • PDF

SCADA RTU 상태이벤트 취득시간 정확도 개선 (An Accuracy Improvement on Acquisition Time of SCADA RTU Status Event)

  • 이주헌;이상중
    • 전기학회논문지
    • /
    • 제62권3호
    • /
    • pp.332-341
    • /
    • 2013
  • SCADA RTU is a remote control unit equipped in substations for automatic operation of a power system. The RTU monitors and measures the operation status of remote substations to transmits the signals to upper SCADA system and receives control command signals from dispatch center to actuate corresponding apparatus. The RTU receives the standard time from GPS receiver to synchronize the times for all devices and acquires the status event of power apparatus using DIM. Without the time synchronization between GPS and RTU, stable operation of the power system and accurate analysis of the system fault are impossible due to the time error of SOE. In this paper, a test is performed to identify if the operation time of SCADA RTU DIM coincides with the standard time. And we tried to find the reason of error, to minimize the time discrepancy. Through this study, RTU operation time could be synchronized with the standard time within 10[ms] to improve the reliability of SOE data.

On the origin of exponential growth in induced earthquakes in Groningen

  • van Putten, Maurice H.P.M.;van Putten, Anton F.P.;van Putten, Michael J.A.M.
    • Earthquakes and Structures
    • /
    • 제11권5호
    • /
    • pp.861-871
    • /
    • 2016
  • The Groningen gas field shows exponential growth in earthquake event counts around a magnitude M1 with a doubling time of 6-9 years since 2001. This behavior is identified with dimensionless curvature in land subsidence, which has been evolving at a constant rate over the last few decades essentially uncorrelated to gas production. We demonstrate our mechanism by a tabletop crack formation experiment. The observed skewed distribution of event magnitudes is matched by that of maxima of event clusters with a normal distribution. It predicts about one event < M5 per day in 2025, pointing to increasing stress to human living conditions.

제품개발환경을 지원하기 위한 Event Calculus 기반의 워크플로우 모델링 (Workflow Modeling for Product Development Environments based on Event Calculus)

  • 이희정;서효원
    • 한국CDE학회논문집
    • /
    • 제15권1호
    • /
    • pp.11-23
    • /
    • 2010
  • A flexible and correct model of the activity flows is required for workflows in product development environments. In particular, the design activity flows are not known until run-time, and conventional approaches have limit to handle this situation because they cannot predefine all the potentially reachable paths. Thus, the structure of the workflow model must be flexible enough to describe variety in workflow design and accommodate dynamic changes during workflow execution. In this paper, we provide the general primitive axioms and change patterns based on event calculus for dynamic workflow specification and execution mechanisms in product development environments. Also, we describe how to execute the workflow dynamically based on the workflow specification and workflow change patterns using abductive planning technique.

행위자 기반 모형을 활용한 효율적 검진센터 서비스배분 및 공간조정에 관한 연구 (A Study on the Effective Health Examination Center Distribution and Space Coordination using Agent based Model)

  • 김석태;홍사철
    • 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
    • /
    • 제24권2호
    • /
    • pp.15-25
    • /
    • 2018
  • Purpose: The important things in space plan of a screening center are improving the spatial awareness by space systemization and minimizing the examination time for customers, and reducing the required time of screening work and maximizing the capacity for the screening center. Therefore, we tried to solve the problem of improving spatial awareness and reducing the examination time by using the pedestrian based discrete event simulation at the minimum cost. Methods: We have analyzed the drawbacks and the supplement points by comparing the floor plan at the time of opening and the current floor plan. Based on the analysis, we propose an improved plan which changes the location of the examination rooms and the number of services, and we also verify the improved plan based on simulation analyses. Results: 1) Through the analyses, we derived the drawbacks of the floor plan at the time of opening, and we realized that the current floor plan reflects the drawbacks. 2) The major reasons of the long examination time are the human traffic jam and the occurrence of queues due to unreasonable allocation of services. 3) Through the discrete event simulation analyses, it was possible to specify the place of the queues manually so as to use the given space fairly. 4) Using the discrete event simulation, it was possible to reduce the examination time and to improve the spatial awareness effectively at the minimum cost. Implications: Although the proposed simulation methodology in this paper is an analysis of the existing screening center, we expect that the proposed methodology will be used to develop a more efficient architectural design process by pre-applying the method to the course of designing a screening center and finding the suitability of the proposed method with the matched number of services.

윈도우 이벤트 로그 기반 기업 보안 감사 및 악성코드 행위 탐지 연구 (Study on Windows Event Log-Based Corporate Security Audit and Malware Detection)

  • 강세림;김소람;박명서;김종성
    • 정보보호학회논문지
    • /
    • 제28권3호
    • /
    • pp.591-603
    • /
    • 2018
  • 윈도우 이벤트 로그는 윈도우 운영체제에서 시스템 로그를 기록하는 형식이며, 시스템 운영에 대한 정보를 체계적으로 관리한다. 이벤트는 시스템 자체 또는 사용자의 특정 행위로 인해 발생할 수 있고, 특정 이벤트 로그는 기업 보안 감사, 악성코드 탐지 등에 사용될 수 있다. 본 논문에서는 기업 보안 감사 및 악성코드 탐지와 관련된 이벤트 로그(외부장치 연결, 응용 프로그램 설치, 공유 폴더 사용, 프린터 사용, 원격 연결/해제, PC 시작/종료, 로그온/오프, 절전모드, 네트워크 연결/해제, 이벤트 로그 삭제, 시스템 시간 변경, 파일/레지스트리 조작, 프로세스 생성, DNS 질의, 윈도우 서비스 추가)들을 선정하고, 발생하는 이벤트 ID를 분류 및 분석하였다. 또한, 기존의 이벤트 로그 분석도구는 EVTX 파싱 기능만을 포함하고 있어 이를 포렌식 수사에 이용할 경우 사용자의 행적을 추적하기 어렵다. 이에 본 연구에서 새로운 분석도구를 구현하였으며, EVTX 파싱과 행위 분석이 가능하다.

디지털 데이터 방송 유즈케이스 시나리오에 기반한 MPEG-21 이벤트 리포팅 구조 설계 (MPEG-21 Event Reporting Message Structure based on digital data broadcasting use case scenarios)

  • 송영주;홍진우;문남미;지경희
    • 방송공학회논문지
    • /
    • 제8권4호
    • /
    • pp.399-409
    • /
    • 2003
  • 본 논문에서는 멀티미디어 컨텐츠의 새로운 패러다임인 MPEG-21의 7가지 요소 중 하나인 이벤트 리포팅에 대한 정의와 필요성에 대해 알아보고 디지털 데이터 방송에서의 이벤트 리포팅 유즈 케이스 시나리오를 통해 이벤트리포팅 메시지들을 예시하고, 이의 전달을 위한 MPEG-21 이벤트 리포팅 구조를 정의하고자 한다. MPEG-21에서는 멀티미디어 프레임워크 내의 디지털 아이템과 관련되어 발생하는 모든 상호 작용을 이벤트라 통칭하구 이를 사용자에게 보고함으로써 신뢰성 있는 전달, 사용자의 프라이버시를 담고 있는 개인 데이터와 기호의 관리, 그리고 저작권 보호관리 등을 위한 목적으로 활용하고자 한다. 본 논문에서는 MPEG-21의 이벤트에 대한 표준적인 측정방법 및 인터페이스를 제공하기 위한 이벤트 리포팅에 대한 정의 및 필요성에 대해 알아보고, 또한 MPEG-21의 이벤트 리포팅에 대한 표준화 활동 동향에 대해 소개하고자 한다.

항공용 SIL에 적용 가능한 이벤트 기반 모델링 및 시뮬레이션 방법 (Event-Driven Modeling and Simulation Method Applicable to Avionics System Integration Laboratory)

  • 신주철;서민기;조연제;백경훈;김성우
    • 한국항행학회논문지
    • /
    • 제24권3호
    • /
    • pp.184-191
    • /
    • 2020
  • 항공용 SIL은 항공전자시스템의 통합 및 검증에 사용되는 통합시험환경이다. 항공용 SIL에는 여러 가지 제약으로 인해 항공기에 탑재되는 장비를 직접 연동할 수 없을 때 장비의 소프트웨어 모델이 필요하다. 지금까지 항공기 개발에 적용한 항공용 SIL의 소프트웨어 모델은 표준화된 방법 없이 일반적인 소프트웨어 개발 방법의 적용으로 재사용이 어려워 소프트웨어 모델 재사용을 위한 프레임워크의 필요성이 제기되었다. 이러한 항공용 SIL 모델의 표준화된 모델링 방법을 위해 DEVS (discrete event system specification) 형식론을 채용하였다. DEVS 형식론은 이벤트 구동(event-driven) 알고리즘이며 이는 기존의 항공용 SIL에 적용되는 절차적이고 반복적인 알고리즘과 어울려 동작하기 힘들다. 이에 본 논문에서는 항공용 SIL 모델의 특징과 기존 방식이 가지는 한계를 보완하고 모델의 재사용성을 극대화할 수 있는 이벤트 기반의 모델링 방법과 실시간 시뮬레이션 방법을 제안한다.

실시간 내장형 시스템의 설계를 위할 비선점형 고정우선순위 스케줄링 (Non-Preemptive Fixed Priority Scheduling for Design of Real-Time Embedded Systems)

  • 박문주
    • 한국정보과학회논문지:컴퓨팅의 실제 및 레터
    • /
    • 제15권2호
    • /
    • pp.89-97
    • /
    • 2009
  • 유비쿼터스 환경에서 널리 사용되고 있는 내장형 시스템에서는 메모리 사용량의 감소와 신뢰성 등의 이유로 쓰레드 기반 프로그래밍 모델보다는 이벤트-구동형 프로그래밍 모델을 채용하는 경우가 많다. 그러나 내장형 시스템의 소프트웨어가 점점 더 복잡해지면서, 내장형 시스템을 위한 소프트웨어를 이벤트-구동형 프로그래밍 모델의 단일 이벤트 핸들러로 프로그램 하는 것은 매우 어려운 과제가 되고 있다. 본 논문에서는 내장형 시스템의 설계에 비선점형 스케줄링 기법을 도입하기 위하여, 다항시간의 스케줄 가능성 평가를 위한 충분조건과 이를 이용한 효율적인 스케줄 가능성 검사 방법을 제시하며, 또한 내장형 시스템에서의 서브-태스크의 활용이 비선점형 스케줄링을 채용했을 때의 단점인 낮은 처리기 이용률을 극복할 수 있는 방안임을 보인다.

Pump Diffusion Mixer에서 압력수량에 따른 응집제 확산분포 특성 (Characteristics of Coagulants Distribution by the Pumping Rate in Pump Diffusion Mixer)

  • 박영오;김기돈;박노석;임재림;임경호
    • 상하수도학회지
    • /
    • 제22권1호
    • /
    • pp.65-71
    • /
    • 2008
  • 급속 혼화공정에서 응집제의 동력학적 수화반응 특성을 고려하여 1초 이내의 순간혼합을 제시하고 있으며, 이러한 이론에 근거하여 설치된 Pump Diffusion Mixer(PDM)의 관내 응집제 확산 분포특성을 조사하였다. D=1,200mm 관경에서 압력수 유량비에 따라 응집제 주입지점으로부터 4.5D되는 지점에서 관 단면의 지점별 제타 전위를 측정하여 평가한 결과, 압력수의 유량비가 2%에서는 분사속도가 낮아 관 단면에 응집제가 골고루 분사되지 못하는 것으로 조사되었다. 그러나 압력수 유량비가 4% 이상이 되면 비교적 균등하게 혼합되며, 8%에서는 관 단면 전체에 균등하게 확산 분포되는 것으로 나타났다.