• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.119-126
• /
• 2011

During precise survey on the top of High rise buildings and civil structures, optical surveying equipments like a Total Station are not recommended to use because of some reasons that uneasier alignment with reflectors located at the top of building, increasing error depends on increasement of observation distance and unavailable dynamic positioning etc. Recently various GPS positioning methods have been applied to this job however almost of them are post-processing method which is required much longer time during for whole process includes stake-out, cross checking, fixing positions and final inspections. Therefore, in this study, we applied with RTK surveying system which allows stake-out and inspection in realtime to avoid delaying of construction schedule and also applied with Quasi Static RTK measurement and network adjustment to get a high accuracy within a few millimeters in structure positioning to achieve a successful management for process and quality control of the project. As a result, very high accurate surveying for structures within approx. 2mm in realtime has been achieved when surveyor conduct a network adjustment using least square method for 4 base lines created by Quasi Static RTK data and we expect this method will be applied to construction survey for high rise buildings and civil structures in the future.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.3
• /
• pp.467-479
• /
• 2009

The purpose of this study was to present the quantitative data which riders can utilize teaching field by comparison analysis of kinematics according to skill level of rider during 2 strides rising trot with the JeJu's-Horse. Participated subjects was consisted of total 10 riders(unskilled: n=5, skilled: n=5). The method of experiment & analysis was based on 3D cinematography. Variables were consisted of temporal, linear & angular kinematics by each event & phase. The skilled assigned more ratio of elapsed time in air than support phase, had the less range of motion in up-down direction and more consistent velocity in lateral & forward direction and performed periodic up-down movement with alignment in vertical direction according to elapsing of phases. The skilled more flexed at elbow and extended backwardly according to elapsing of phases, while more flexed forwardly at hip & knee and plantarflexion at ankle. The skilled postured backward extension but the unskilled do forward flexion. That is, It was considered that the unskilled continued more unstable posture than the skilled during 2 strides in rising trot.

• Korean Journal of Optics and Photonics
• /
• v.17 no.3
• /
• pp.248-255
• /
• 2006

Most optical security systems use a 4-f correlator, Mach-Zehnder interferometer, or a joint transform correlator(JTC). Of them, the JTC does not require an accurate optical alignment and has a good potential for real-time processing. In this paper, we propose an image encryption system using a position shift property of the JTC in the Fourier domain and a random phase image. Our encryption system uses two keys: one key is a random phase mask and the other key is a position shift factor. By using two keys, the proposed method can increase the security level of the encryption system. An encrypted image is produced by the Fourier transform for the multiplication image, which resulted from adding position shift functions to an original image, with a random phase mask. The random phase mask and position shift value are used as keys in decryption, simultaneously. For the decryption, both the encrypted image and the key image should be correctly located on the JTC. If the incorrect position shift value or the incorrect key image is used in decryption, the original information can not be obtained. To demonstrate the efficiency of the proposed system, computer simulation is performed. By analyzing the simulation results in the case of blocking of the encrypted image and affecting of the phase noise, we confirmed that the proposed method has a good tolerance to data loss. These results show that our system is very useful for the optical certification system.

• 전자공학회논문지 IE
• /
• v.44 no.1
• /
• pp.27-32
• /
• 2007

This study was to suggest the predictive model of propagation, considering the effect by the multipath waves produced by the sending and receiving vehicles' left/right reflectors and the adjacent vehicles when the communication between the vehicles on the one-way two-lanes road in the urban city with a lot of traffic jams. Then, the radius of curved road was 600[m], the length of curved roads $52.4\sim471.2[m]$, and the bridge's pier of road was $5o\sim45o$. Also, it was simulated by changing the receiving vehicle located on the curved road's gap from minimum 3.3[m] to maximum 29.5[m], corresponding to the change of distance of the bridge's pier of road and curved road. As a result of this research above, in case of $5o\sim15o$ bridge's pier of road, it was within l[dB] regardless of the receiving vehicle's position on the curved road in case of propagation path loss. In case of $15o\sim45o$, it was approximately $1\sim8[dB]$ as the bridge's pier of road is changed. And, in case of propagation path, it found out that it was changed to $0.4\sim120[m]$ according to the change of bridge's pier of road. Then, the delay time of propagation was 400[nsec] as it produced 120[m] in the difference of propagation path.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.127-133
• /
• 1998

An impacted tooth is defined pathologically as a tooth that remains under the mucosa of inside bone without eruption of the crown after a specific period of eruption. Clinically, the term includes those teeth, even before eruption period, that are not expected to erupt due to shape, position and alignment of tooth and lack of space. Canine is prone to impaction more than other teeth because it has the longest time to develop and a complex route from the place of formation to the site of eruption. The impaction incidence of maxillary canine is repoted 0.92$\sim$3.3% (Ferguson, 1990). In 1995 Orton reported that the incidence was 0.92$\sim$2.2% and palatal impaction was more frequent than labial impaction(85%:15%). In 1969 Johnston presented it was more common to woman than to man(3:1). The etiology includes systemic disease such as endocrine disorder, cleidocranial dysostosis, irradiation, Crouzon syndrome, ricketts, facial hemihypertrophy and hereditary and local problems such as ectopic position of the tooth, distance of tooth from its place of eruption, malformation of the tooth, presence of supernumerary teeth, trauma of tooth germ, infection of tooth germ, displacement of tooth germ or tooth by a neoplasm, ankylosis, overretention of deciduous predecessor, lack of space for the tooth in the dental arch and mucosal barrier due to gingival fibrosis. The maxillary canine is especially important as it has the longest root, provides guidance for lateral movement of the mandible and masticatory function and assumes an important role esthetically as it is located at mouth angle. If left untreated, it may cause migration and external, internal resorption of adjacent teeth, loss of arch length, formation of dentigerous cyst or tumors, infection and referred pain as well as malposition of the tooth. Therefore, periodic examination of the development and eruption of the maxillary canine is especially important in a growing child. This case study presents the results of treatment of palatally impacted maxillary canine utilizing surgical exposure and orthodontic tooth movement on patients visiting SNUDH dept. of pediatric dentistry.

• Trans-
• /
• v.4
• /
• pp.111-134
• /
• 2018

The purpose of this study is to understand the principles of Balletfit and its program structure and to establish Balletfit's effects on body shape change and postural correction. Interview, the most commonly used method of qualitative research, was chosen as the research method. Ten Balletfit class participants, who have attended private lessons twice per week, for three to six months period of time, were selected. These participants were chosen from participants of private lessons instead of group lessons for in-depth insights. The research was limited to a small group of participants and therefore, it is difficult to standardize the result. Also, because this study is based on the opinions of the participants, not by a posture measuring device, the accuracy of the result is limited as well. The followings are the conclusion of this research. First, the participation motive was either internet research or acquaintance's recommendation. Secondly, the effort to change the body shape. After experiencing Balletfit classes, the participants became aware of their body and made an effort to recover their posture by holding the stomach tight and sitting up correctly. Thirdly, their posture became ideal. Most participants became aware of what an ideal posture is and as their body became ideal, the participants also recovered their health by becoming aware of their inner and outer body. Lastly, they tend to prefer beautiful body line. After the experience, all participants became interested in the body line and preferred to build a beautiful body line with correct postures. The most significant effect of Balletfit was the body line. Therefore, the experience of Balletfit develops the inner and outer body awareness and also can be consider to effect the change of the body shape. Balletfit will become a satisfying exercise for modern people, who desire a beautiful, healthy body.

• Journal of the Korean Vacuum Society
• /
• v.20 no.2
• /
• pp.155-163
• /
• 2011

Carbon nanotubes (CNT) have been attracted much attention since they have been expected to be used in various areas by virtue of their outstanding physical, electrical, and chemical properties. In order to make full use of their prominent electric conductivity in some areas such as electron emission sources, device interconnects, and electrodes in energy storage devices, direct growth of CNT with vertical alignment is definitely beneficial issue because they can maintain mechanical stability and high conductivity at the interface between substrates. Here, we report direct growth of vertically aligned CNT (VCNT) on Cu foils using thermal chemical vapor deposition and characterize the field emission property of the VCNT. The VCNT's height was controlled by changing the growth temperature, growth time, and catalytic layer thickness. Optimum growth condition was found to be $800^{\circ}C$ for 20 min with acetylene and hydrogen mixtures on Fe catalytic layer of 1 nm thick. The diameter of VCNT grown was smaller than that of usual multi walled CNT. Based on the result of field emission characterization, we concluded that the VCNT on Cu foils can be useful in various potential applications where high conductivity through the interface between CNT and substrate is required.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.2
• /
• pp.29-35
• /
• 2017

In this paper, we investigated a manufacturing process of metal micro-wire interconnection on submillimeter diameter catheter. Over the years, flexible electronic researches have focused on flexible plane polymer substrate and micro electrode manufacturing on its surface. However, a curved polymer substrate, such as catheter, is very important for medical application. Among many catheters, importance of submillimeter diameter steerable catheter is increasing to resolve the several limitations of neurosurgery. Steering actuators have been researched for realizing the steerable catheter, but there is no research about practical wiring for driving these actuators. Therefore we developed a new manufacturing process for metal micro-wire interconnection on submillimeter diameter catheter. We designed custom jigs for alignment of the metal micro-wires on the submillimeter diameter catheter. An UV curing system and commercial products were used to reduce the manufacturing time and cost; Au micro-wire, UV curable epoxy, UV lamp, and submillimeter diameter catheter. The assembled catheter was characterized by using an optical microscope, a resistance meter, and a universal testing machine.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.1
• /
• pp.151-163
• /
• 2008

A formulation of three-dimensional model of articulated train-b ridge dynamic interaction has been made for the Korean eXpress Train (KTX). Semi-periodic profiles of rail irregularities consisting of elevation, alignment, cross and gauge irregularities have also been proposed using FRA maximum tolerable rail deviations. The effects of rail joints and sleeper step were also included. The resulting system matrices of train and bridge are very spare, and thus, are stored in one-dimensional arrays, yielding a time-efficient solution. A numerical algorithm for computing bridge-train response including an iterative scheme is also formulated. A program simulating train-bridge interaction and solving this problem using the new algorithm is implemented as new modules for the f inite element analysis software named XFINAS. Computed results using the new program are then checked by that of the validated 2-D bridge-train interaction model. This new 3D analysis provides more detailed train responses such as swaying, bouncing, rolling, pitching and yawing accelerations, which are useful inevaluating passenger riding comfort. Train operation safety and derailment could also be directly investigated by relative wheel displacements computed from this program.

• Journal of Veterinary Clinics
• /
• v.31 no.6
• /
• pp.523-526
• /
• 2014

Three dogs were admitted for repair of bone fracture. Case 1 (Maltese, 1.8 kg, intact female, 5-month-old) and case 2 (poodle, 3.0 kg, intact female, 6-month-old) had non-weight bearing lameness in the left pelvic limb, and case 3 (mixed, 3.3 kg, intact female, age unknown) had non-weight-bearing lameness in the left thoracic limb. On orthopedic examination, there was pain, crepitus, palpable instability and substantial soft tissue swelling on the affected side. No neurological deficits were identified. Radiographs revealed left proximal metaphyseal tibial and fibular fractures in cases 1 and 2, and left proximal metaphyseal radial and ulnar fractures in case 3. All cases had closed long-bone fractures with short juxta-articular fracture segments. Under fluoroscopic guidance, proper placement of the ring fixation elements was confirmed during surgery. Two or three rings were used to stabilize fractures with traditional circular external skeletal fixators (CESF). Postoperative radiographs showed acceptable alignment and apposition of the previously identified fracture. Time to radiographic union ranged from 5 to 14 weeks and there were no signs of implant failure or pin tract infection. Functional outcomes were excellent in all cases. CESF can be successfully used to reduce short juxta-articular fractures in which bone plates or external skeletal fixation cannot be applied.