• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.12
• /
• pp.1315-1320
• /
• 2015

In this paper Communication data link equipment on a high speed-hopping method to use the frequency resources efficiently for the frequency environment is introduced such as sensing techniques, using the same frequency band by using the received two-channel technique and the receive filter bank unit applied to be shared with other equipment such as radar and so on. The real-time measurement and analysis were operated for measurement the frequency environment of the operating band in advance. and primarily equipment to develop is analyzed how the interference effect to the radar minimize the operation of radar equipment. In reverse, to use the same frequency band the methods such as frequency sharing techniques are presented in this paper. Finally, by design of the main items of the RF transceiver NF, transmission output, and a simulation of the IMD, such as whether the key is verified prior to meet specifications.

• The Korean Journal of Zoology
• /
• v.39 no.2
• /
• pp.132-138
• /
• 1996

To learn how maximal locomotory speed of animals is defined in terms of hindlimb structure and muscle contractile function, take-off speed, hindlimb length, thigh muscle mass, shortening velocity and power of the sastrocnemius muscle were measured with one fast species, Rono nigromaculota and one relatively slowresponding species, Bombina orientalis. Take-off speed (m.sec-1) was greater in R. nigromoculata $(2.4\pm0.2SD, $ n: 14) than in the Bombino $(1.6\pm0.1SD, $ n=8). Stvle of the take-off response was a long-iump type in the Rano and a short-ranged hopping in the Bombing. Faster take-off capacity of the ranid frogs was supported by the longer hindlimb length (relative to body length) and the more massive thigh muscles (relative to body mass), compared to the Bombina. Further, the ranids exhibited faster maximal shortening velocity and Breater maximal power generateion than the Bombina [Vmax $(ML.sec-1)=11.79\pm1.69SD$ for the Runa and $9.74\pm1.27SD$ for the Bombina; Pmax $nW.kg-1)=222.42\pm42.42SD$ for the Rono and $169.03\pm34.52SD$ for the Bombinal. With more massive thigh muscles and greater mechanical power, the ranids would generate greater total power and thus higher energy release per unit time to muscle tissues for the burst take-off. As a consequence, biomechanical properties seen in the ranids seem to be more effective for frost take-off than in the Bombina.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.11C no.3
• /
• pp.70-74
• /
• 2001

Admittance or impedance spectroscopy is one of the powerful tools to study dielectric relaxation and loss processes in organic and inorganic materials. In this study, the frequency dependent properties of an indium tin oxide/tris(8-hydroxyquinoline) aluminum($Alq_3$)/aluminum structure have been studied. The conductance of the $Alq_3$ film increases with the DC applied voltage up to 4V and decreases above 4V in the low frequency region. This indicates that the resistance of the device decreases with the applied bias due to the carrier injection enhancement, thereafter the injected carriers form the space charge and the additional injection of carriers is prevented. The Cole-Cole plot of the admittance takes a one-semicircle shape, which means that the device can be modeled as a parallel resistor-capacitor network. The resistance and capacitance were estimated as 8.62k${\Omega}$ and 2.7nF, respectively, at 3V in the low frequency region. The dielectric constant ( ${\epsilon}'$ ) of the $Alq_3$ film is independent of the frequency in the low frequency region below 100kHz, while the frequency dependency was observed at above 100kHz. The dielectric loss factor ( ${\epsilon}"$ ) of the $Alq_3$ film shows the dielectric dispersion below 100kHz and dielectric absorption in higher frequency domain. The dispersion is thought to be related to the hopping process of the carriers. The ${\epsilon}"$ is proportional to the reciprocal of the frequency. The dielectric relaxation time was extracted to about 0.318${\mu}s$ from the dielectric absorption spectrum.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.2
• /
• pp.113-119
• /
• 2017

In this paper, we have shown the performance analysis results of the LoRa low power wide area network under duty cycle local regulation in Korean RFID/USN frequency band. Especially, we analyzed uplink throughput and data transmission time of a single LoRa end device. From the analysis results, duty cycle regulation, in which a data transmission should be ended within 0.4 second, limits the performance of LoRa network. Therefore, it is necessary to revise Korea's duty cycle regulation referencing EU regulation in order to assess LoRa network in Korea.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1103-1108
• /
• 2010

In this paper, Frequency Synthesizer which is widely used for FH-SS system is proposed and the experimental results are analyzed. The performance of the DPLL(Digital Phase-Locked-Loop), which is the main part of the Synthesizer is analyzed by the computer program. Using Maxplus-II tool provided by altera. co., ltd, each part of the DPLL is designed and all of them is integrated into EPM7064SLC44-10 chip. And the simulation results are compared with the characteristics of the implemented circuits for analysis. And the experiential results show that the N value of the loop filter is toggled to adjacent N value, which result in phase jitter of the output. It can be resolved by increasing DCO(Digital Controlled oscillator) clock rate.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.5
• /
• pp.319-325
• /
• 1999

Direct current(d.c.)leakage current voltage characteristics of radio-frequencymagnetron sputtered BaTa\sub 2\O\sub 6\ film capacitors with aluminum(A1) top and indium tin oxide (ITO) bottom electrodes have been investigatedas a function of applied field and temperature. In order to study surfacetreatment effect on the electrical characteristics of as-deposited film weperformed exposure of oxygen plasma on $BaTa_2O_6$ surface. d. c.current-voltage (I-V), bipolar pulse charge-voltage (Q-V), d. c. current-time (I-t) andcapacitance-frequency (C-f) analysis were performed on films. All ofthe films exhibita low leakage current, a high breakdown field strength (3MV/cm-4.5MV/cm), and high dielectric constant (20-30). From the temperature dependence of leakage current,we can conclude that the dominant conduction mechanism is ascribed toSchottky emission at high electric field (>1MV/cm) and hopping conduction at lowelectric field (<1MV/cm). According to our results, the oxide plasma surfacetreatmenton as-deposited $BaTa_2O_6$ resulted in lowering interfacebarrier height and thus, leakage current when a negative voltage applied to the A1 electrode. This can be explained by reduction of surface contamination via etching surface and filling defects such as oxygen vacancies.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.69-76
• /
• 2015

In this paper, we propose and analyze a M-ary transmission scheme in time hopping ultra-wide band(UWB) system using mutually orthogonal modified Hermite polynomial(MHP) pulses. The proposed M-ary transmission scheme employs the orthogonal property between different ordered pulses and N data bits make the M-ary signals by linear combination of M MHP pluses. The theoretical analysis and simulation results show that the proposed system has better performance and higher data rate than conventional M-ary UWB system. We derive the general form of correlation function for MHP pulses and analyze bit error rate(BER) performance over additive white Gaussian noise(AWGN) with the presence of timing jitter. We show that the proposed system has the improved BER performance and robustness to timing jitter and low power spectrum density compared with conventional M-ary UWB system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1566-1573
• /
• 2021

Rendezvous is a process that assists nodes in a Cognitive Radio Networks (CRNs) to discover each other. In CRNs where a common control channel is unknown and a number of channels are given, it is important how two nodes find each other in a known search region. In this paper, I have proposed and analyzed a channel hopping sequence using Sidel'nikov sequence by which each node visits an available number of channels. I analyze the expected time to-rendezvous (TTR) mathematically. I also verify the Rendezvous performance of proposed sequence in the view of TTR under 2 user environment compared with JS algorithm and GOS algorithm. The Rendezvous performance of proposed sequence is much better than GOS algorithm and similar with JS algorithm. But when M is much smaller than p, the performance of proposed sequence is better than JS algorithm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.3
• /
• pp.292-296
• /
• 2022

(La_0.5Nd_0.2Sr_0.3)MnO₃ specimens were prepared by a solid-state reaction. In all specimens, X-ray diffraction patterns of an orthorhombic structure were shown. The fracture surfaces of (La_0.5Nd_0.2Sr_0.3)MnO₃ specimens showed a transgranular fracture pattern be possibly due to La ions (0.122 nm) as a perovskite A-site dopant substituting for Nd ions (0.115 nm) having a small ionic radius. The full-width at half maximum (FWHM) of the Mn 2p XPS spectra showed a value greater than that [8] of the single valence state, which is believed to be due to the overlapping of Mn²⁺, Mn³⁺, and Mn⁴⁺ ions. The dependence of Mn 2p spectra on the Mn³⁺/Mn⁴⁺ ratio according to sintering time was not observed. Electrical resistivity resulted in the minimum value of 100.7 Ω-cm for the specimen sintered for 9 hours. All specimens show a typical negative temperature coefficient of resistance (NTCR) characteristics. In the 9-hour sintered specimen, TCR, activation energy, and B25/65-value were -1.24%/℃, 0.19 eV, and 2,445 K, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1501-1509
• /
• 2001

Recently, the use of wireless communication systems has been rapidly increasing, which results in a difficult problem in efficient control of limited frequency resources. As a way of solving this problem, the ultra wideband time hopping impulse radio system attracts much attention. The impulse radio system communicates pulse position modulated data using Gaussian monocycle pulses of very short duration less than 1 nsec. Thus the transmitted signal has very low power spectral density and ultra wide bandwidth from near D.C. to a few GHz. It is blown that it hardly interferes with the existing communication systems because of its very low power spectral density. The purpose of this paper is to characterize multipath propagation of the impulse radio signal and to evaluate the performance of the correlator-based receiver for the multipath environments. In this paper, we consider the deterministic two-path model and the statistical indoor multipath model of Saleh and Valenzuela. For the two-path model the output of the correlator with the ideal reference waveform varies according to the relative difference between the indirect path delay and the time interval of PPM, and to the indirect path gains. In addition, the characteristics of bit error rates is measured for the two models through computer simulation. The simulation results indicate that the performance of the impulse radio system depends both on the relative difference between the indirect path delay and the time interval of PPM, and on the indirect path gains. Furthermore, it is observed that the reference signal designed for the AWGN channel can not be applied to the multipath channels.