• Journal of the Korea Safety Management & Science
• /
• v.17 no.3
• /
• pp.133-141
• /
• 2015

This study tried to identify the problems associated with the posture to be analyzed and tried to suggest guidelines for MSDs(Musculoskeletal Disorders) evaluation based on working posture. A total of 50 jobs from 3 different types of industries(electronics, hospitals, automobiles) were used for MSDs evaluation study which was done by 6 observers. Two indexes were applied to identify the problem in this study which were percentage of agreement and counter-time-error rate. Specifically, 'counter-time-error rate' represented a degree of consistency in terms of selecting the posture to be analyzed time after time. Main results of the study were as follows; 1) The average percentage of agreement for representative posture for whole body was relatively higher than that for representative postures for individual body parts, 2) The counter-time-error rate(%) has been reduced as the evaluation process has repeated for the same job. 3) The counter-time-error rate(%) for electronics, hospitals, and automobiles were 63.4%, 61.2%, and 67.3% respectively. 4) The counter-time-error rate(%) for the job with the work cycle of 0.5 to 2 minutes were lower than that of the jobs with the work cycles less than 0.5 minute or greater than 2 minute. 5) The work cycles and the number of trials had significant effects on counter-time-error rate while the types of industries did not have significant effects on counter-time-error rate. Some guidelines could be prepared from the results of the study. Probably, there should have an extension in terms of form and matter for this study in order to have more practical output.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.12
• /
• pp.539-546
• /
• 2002

In this paper, we consider a wireless multimedia environment to service both real-time video traffic and non-real-time WWW-application traffic In our suggested new packet scheduling algorithm, we consider both the accumulation counter and SIR to reduce delay in real-time traffic. In addition, our packet scheduling algorithm gives priority first to real-time video traffic service and then to non-real-time internet Packet service when real-time traffic service is absent. From the simulation results, we find that the AC (Accumulation Counter) scheme has much smaller delay than the conversional M-LWDF scheme for real-time video data users, which has a special quality sensitive to its own delay. We also consider the transmission structure of using both the frame period in the time-axis and the OVSF codes in the code-axis at the same time, which is similar to the structure of HSDPA system.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.1
• /
• pp.1-7
• /
• 2017

Objective: The purpose of this study was to analyze the relationship between ground reaction force (GRF) and attack time according to the position of hand segments during counter attack in Kendo. Method: The participants consisted of 10 kendo athletes (mean age: $21.50{\pm}1.95yr$, mean height: $175.58{\pm}5.02cm$, mean body weight: $70.96{\pm}9.47kg$) who performed standard head strikes (A) and counter attack with a preferred hand position of +10 cm (B), 0 cm (C), and -10 cm (D). One force-plate (AMTI-OR-7., USA) was used to collect GRF data at a sample rate of 1,000 Hz. The variables analyzed were the attack time, medial-lateral GRF, anterior-posterior GRF (AP GRF), peak vertical force (PVF), and loading rate. Results: The total attack time was shorter in types A and C than in types C and D. The AP GRF, PVF, and loading rate had significantly higher forces in types C and D than in types A and C. The attack time (bilateral and unilateral leg support and total) was positively correlated with the GRF variables (vertical GRF and loading rate) during the counter attack in Kendo (r = 0.779 [$R^2=0.607$], p < 0.001). Conclusion: The positions of the hand segments can be changed by various conditions of the opponent in Kendo competitions; however, the position preferred by an individual can promote the successful ratio of the counter attack.

• Journal of Computing Science and Engineering
• /
• v.7 no.4
• /
• pp.285-299
• /
• 2013

To enable hard real-time systems to take advantage of multicore processors, it is crucial to obtain the worst-case execution time (WCET) for programs running on multicore processors. However, this is challenging and complicated due to the inter-thread interferences from the shared resources in a multicore processor. Recent research used the combined cache conflict graph (CCCG) to model and compute the worst-case inter-thread interferences on a shared L2 cache in a multicore processor, which is called the CCCG-based approach in this paper. Although it can compute the WCET safely and accurately, its computational complexity is exponential and prohibitive for a large number of cores. In this paper, we propose three counter-based approaches to significantly reduce the complexity of the multicore WCET analysis, while achieving absolute safety with tightness close to the CCCG-based approach. The basic counter-based approach simply counts the worst-case number of cache line blocks mapped to a cache set of a shared L2 cache from all the concurrent threads, and compares it with the associativity of the cache set to compute the worst-case cache behavior. The enhanced counter-based approach uses techniques to enhance the accuracy of calculating the counters. The hybrid counter-based approach combines the enhanced counter-based approach and the CCCG-based approach to further improve the tightness of analysis without significantly increasing the complexity. Our experiments on a 4-core processor indicate that the enhanced counter-based approach overestimates the WCET by 14% on average compared to the CCCG-based approach, while its averaged running time is less than 1/380 that of the CCCG-based approach. The hybrid approach reduces the overestimation to only 2.65%, while its running time is less than 1/150 that of the CCCG-based approach on average.

• Korean Institute of Interior Design Journal
• /
• v.19 no.3
• /
• pp.30-37
• /
• 2010

Dutch artist, Theo van Doesburg had shown short but strong experimental aesthetics in his works through De Stijl movement. He played a leading role for editing De Stijl magazine and performed various formative works such as painting, sculpture, and architecture. In 1923 he opened the first De Stijl exhibition cooperated with Cornelis van Eesteren. In this architecture exhibition he showed rich formal spirits of counter-construction in his major design works, that is Maison Particuliere and Maison D'artiste among three houses projects. Formal characteristics of counter-construction can be summed up under two categories, time and space. Analytical results are as follows; First, the characteristics of counter-construction related to time category include two types of two mode. One is linear aspect of time based on the viewer's movement. The other aspect is simultaneity caused by synoptical effect. These could be proved by the analysis of arrangement of color planes. Secondly, the spatial aspects of counter-construction are produced through two different ways of formal strategies. Van Doesburg arranged cubes in very irregular pattern. This treatment induces ambiguous void and creates feeling of subject's space. And, through deleting, shifting, and extending he could make dynamic spatial effect by interpenetration between in and out. This fluid space thus introduces movements of one's gaze and circulation. He denied traditional classical values which had ruled the western aesthetical discipline for centuries and believed that mankind can reach the realm of universal equilibrium by contrast and tension created by counter-construction. In this vein Theo van Doesburg was an avant-garde artist of Hegelian thoughts who adopted the dialectical method without following the formal characteristics from ancestors.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.104-109
• /
• 2001

The time to measure the size distribution using Condensation Nuclei Counter(CNC) and Differential Mobility Analyzer(DMA) can be shortened by classifying particles ramping the DMA voltage exponentially and continuously. In measurement, particles sampled at different time are mixed together going through sampling tube and CNC. Because the size distribution is inversed by using detector responses to sampling time intervals in this accelerated method, the mixing effects give inversion errors to the size distribution. The mixing effects can be considered by appling the transfer function with mixing effects to the data inversion. The inversion considering this effects gives birth to the size distribution shifted to the opposite direction of the size scanning.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.1
• /
• pp.62-68
• /
• 2015

PURPOSE. The purpose of this research was to evaluate the amount of reosseointegration after counter torquing (reverse torque) and transposing the installed implants at different times. MATERIALS AND METHODS. This study was done on ten tibiae of five cross-bred dogs. At the first day one implant was installed in each tibia. After one week half of the implants were randomly counter torqued (1WCT) and the other half were explanted and reimplanted in a new juxtaposition site (transposed)(1WT). At the same time three new implants were installed in each dog, one of them was considered as one week control (1WC) and remaining two as 8 week groups (8WCT&8WT). After eight weeks the 1WCT and 1WT implants were loosened by counter torque and the quantity of needed force for liberation was measured with the digital device (BGI). At the same time one implant was installed in each dog as eight week control (8WC) and the same protocol was repeated for 8 week groups after another 8 weeks. RESULTS. All implants were osseointegrated. Mean quantities of osseointegration in case groups indicated better amounts rather than control groups. CONCLUSION. Counter torque or transposition of the installed implants one week or eight weeks after the implantation did lead to osseointegration.

• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.12
• /
• pp.165-168
• /
• 1994

We proposed a new model of neural network, called Time Delay Counter-Propagation Neural network (TDCPN). This model is combined properly by the merits of Time Delay Neural Network (TDNN) structure and those of Counter - Propagation Neural network (CPN) learning rule, so that increase recognition rate but decrease total teaming time. And we use this model to simulate classification of EMG signals, and compare the recognition rate and teaming time with those of another neural network model. As a result of simulation, the proposed model is proved to be very effective.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.1 s.244
• /
• pp.32-41
• /
• 2006

We analyzed the non-Newtonian and non-isothermal flow in the melt conveying zone in co-rotating and counter-rotating screw extruder system with the commercial code, STAR-CD, and compared the mixing performance with respect to screw speed and rotating direction. The viscosity of fluid was described by power-law model. The dynamics of mixing was studied numerically by tracking the motion of particles in a twin screw extruder system. The extent of mixing was characterized in terms of the residence time distribution and average strain. The results showed that high screw speed decreases the residence time but increases the shear rate. Therefore higher screw speed increases the strain and has better mixing performance. Counter-rotating screw extruder system and co-rotating screw extruder has the similar shear rate with the same screw speed in spite of different rotating direction. However, the counter-rotating screw has good mixing performance, which is resulted from longer residence time than that of co-rotating screw extruder.

• Nuclear Engineering and Technology
• /
• v.10 no.3
• /
• pp.137-144
• /
• 1978

A method is presented here in order to determine a nonlinearity correction of observed counter rates in a GM counter. An expression, which is developed under the assumption of dead time dependence on counting rates, gives good agreement with the results obtained from the experimental work. The variation of pulse voltages from a GM counter with counting rates was measured with the aid of pulse height analyzer. This method gives accurate values for the dead time over a wide range of counting. The technique as outlined allows tile exact correction of the nonlinearity caused by dead time loss. It was observed that the dead time decreases as the counting rate increases.