• 전자공학회논문지A
• /
• 제32A권6호
• /
• pp.67-74
• /
• 1995

This paper proposes the step-stress type-I censoring model for analyzing the data of accelerated life test and reducing the time of accelerated life test. In order to obtain the data of accelerated life test, the step-stress accelerated life test was run with voltage stress to CMOS Hex Buffer. The Weibull distribution, the Inverse-power-law model and Maximum likelihood method were used. The iterative procedure using modified-quasi-linearization method is applied to solve the nonlinear equation. The proposed Weibull step-stress type-I censoring model exactly estimases the life time of units, while reducting the time of accelerated life test and the equipments of test.

• Journal of Mechanical Science and Technology
• /
• 제14권5호
• /
• pp.547-552
• /
• 2000

The objective of this paper is to present a modified fractional step method of keeping a constant mass flow rate in spatially periodic flows, because original fractional step methods do not precisely keep the mass flow rate constant in time. In the modified method, the mean and fluctuating pseudo-pressure gradients are separately obtained at each time step. This method is successfully applied to channel and pipe flows and shown to be suitable for maintaining a constant mass flow rate in time.

• 한국정밀공학회지
• /
• 제14권10호
• /
• pp.102-108
• /
• 1997

The technology of Semi-Solid Forging (SSF) has been actively developed to fabricate near-net- shape products using light and hardly formable materials. Generally, the SSF process is composed of slug heating, forming, compression holding and ejecting step. After forming step in SSF, the slug is compressed during a certain holding time in order to be completely filled in the die cavity and be accelerated in solidification rate. This paper presents the analysis of temperature, solid fraction and shrinkage at compression holding step for a cylindrical slug, then predicts the solidification time to obtain the final shaped part. Enthalpy-based finite element analysis is performed to solve the heat transfer problem considering phase change in solidification.

• 대한토목학회논문집
• /
• 제14권6호
• /
• pp.1357-1363
• /
• 1994

난류전단 흐름에서의 기포응집에 따른 기포의 크기분포를 예측하기 위한 Monte-Carlo 모의모형을 개발하였다. 임의로 선택된 각 초기위치에 일련의 기포들을 매시각 발생시키고, 각 기포들의 움직임과 충돌을 모의함으로써 각각의 위치와 크기를 추적하도록 하였다. 기포의 횡방향 변위는 이송확산 방정식의 수치해를 이용하여 부여하였으며, 종방향 변위는 흐름의 대수유속분포 및 기포 상승속도로부터 주어지도록 하였다. 각 기포들간의 초기 상대위치와 상대변위를 이용한 기하학적 해석에 의하여 매시간단계에서의 기포응집을 탐지하여, 시간단계 말기에서의 기포 총수, 각 기포의 위치 및 크기를 결정하였다. 기포들의 크기 및 위치를 나타내기 위하여 소요되는 기억용량을 최소화하도록 전산모형을 구성하였다.

• 수산해양기술연구
• /
• 제41권3호
• /
• pp.199-206
• /
• 2005

As the basic study about improvement of yellow croaker drift gill net fishing implement and development of the fishing system, this study drew problem after synthetically analyzing hauling system of yellow croaker drift gill net used in the coast of Chuja Island and tested several characters and analyzed in hauling process with 5 step net hauler model for improving the problem. The analysis results are as follows. When the angle between axises of drum centers was small, it showed the tendency that hauling time was fast. Hauling time was faster when drum was 5 step rather than 3 step. When drum was 5 step, slippery phenomenon was small and hauling was stable. Tension was larger when drum was 5 step rather than 3 step. When drum was 5 step, the range of change of the maximum and minimum value was small and hauling was stable. When drum was 3 step, there was following formula between hauling time ($Ht_3$) and angle between axises of drum centers ($A_g$) $Ht_3$ : ($7.15Hs^{-0.81}$) $A_g^{-0.81}$, when drum was 5 step there was following formula.$Ht_5$ : ($6.45Hs^{-0.75}$) $A_g0.10$, here, Hs is hauling speed. When drum was 3 step and hauling speed was 28cm/sec, tension was $T=0.08A_8^3-1.60A_g^3-0.49A_g+369.56(r=0.99)$, when drum was 5 step, tension was, $T=-0.01A_g^3+1.96A_g^2-34.05A_g+414.58$ (r-0.99), here, T was tension(g).

• 한국통신학회논문지
• /
• 제28권5A호
• /
• pp.267-275
• /
• 2003

UMTS는 1) 슬롯 동기 획득, 2)코드그룹 및 프레임 동기 획득, 3) 코드 식별 과정으로 구성된 초기 셀 탐색방법을 사용한다. 단말 모뎀의 초기 셀 포착 성능은 탐색기의 관찰 구간과 임계값 등의 탐색 파라미터에 의하여 크게 영향을 받는다. 본 논문의 목적은 최소 평균 포착 시간을 구하기 위한 단계별 관찰 구간과 임계값을 구하는데 있다. 본 논문에서는 3단계 탐색과정을 상태 다이어그램을 통하여 모델링하고 이로부터 단계별 평균 검출 시간과 전체 평균 포착 시간을 유도한다. 또한 초기 발진기 오차를 고려한 셀 탐색 알고리즘을 제시하고, 모의 실험결과와 유도한 단계별 평균 검출 시간을 이용하여 적절한 각 단계별 검출 시간을 설정한다. 각 단계의 최적 임계값은 유도된 전체 평균 포착 시간으로부터 결정될 수 있으며, 결정된 파라미터를 이용하여 다중경로 페이딩 채널에서 500ms이내의 성능을 얻을 수 있었다.

• 동아시아식생활학회지
• /
• 제1권2호
• /
• pp.115-127
• /
• 1991

Information on brew time for Samhaeju can get from the 26 kinds of classical literature, which deal with Samhaeju. Usually, Samhaeju is brewed on any day of the Boar in January of the lunar calendar. However, any day of the Boar in a year seams to be possible for the brew time. In the first step of the manufacture procedure, nonglutinous and glutinous rice are used with the same propontion. The nonglutious and glutinous rice ratio become higher on the 2nd and the 3rd step than in the 1st step. The amount of water adding to the Samhaeju-base is increased step by step. In the first step, processing type of the cereal is predominantly gruel type, which is followed by rice calce. In the 2nd step, rice cake and doughnut-type rice cake are more common type than gruel type. In the 3rd step, processing type of the cereal in Samhaeju is mostly steamed water-soaked rice. Companing China and Japan with Korea, there is difference in the processing types of the cereal. They use steamed water-soaked rice in any step. Nuruk(fermenter) is added to the cold processed cereal in the first step.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.26-28
• /
• 2008

This paper proposes a method correcting the error which is created inherently by time-step approximation in FEA. For a simple RL linear circuit, the error in time-step analysis is analytically investigated and the correction method is proposed. Then for a practical inductor model, non-linear time-step analysis is performed and the calculation result is corrected by the proposed method. The accuracy of the corrected result is confirmed by comparing the electric input and output power.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.803-808
• /
• 2007

LCCA module enabling to estimate LCC and analyze time-variant reliability index of a plate girder bridge was developed. The developed module was based on the designed data structure following the standardized methodology of ISO/STEP, LCCA module consisted of LCC estimation module, which is composed of six sub modules according to the cost category, and reliability index analysis module, which is composed of time-variant corrosion sub module, time-variant live load sub module, and element reliability analysis sub module, The effectiveness of the developed LCCA module was verified by estimating LCC and analyzing time-variant reliability index of a plate girder bridge on the basis of the constructed test database.

• Structural Engineering and Mechanics
• /
• 제8권6호
• /
• pp.561-578
• /
• 1999

The response of a reinforced concrete structure to loading is both immediate and time-dependent. Under a sustained load, the deflections caused by creep and shrinkage may be several times their instantaneous values. The paper describes a general finite element procedure, based on the so-called layered model, to analyse reinforced concrete members, and shows in particular how the simple Step by Step Method may be incorporated into this procedure. By invoking the Modified Newton Raphson Method as a solution procedure, the accuracy of the finite element method is verified against independent test results, and then applied to a variety of problems in order to demonstrate its efficacy. The method forms a general method for analysing highly indeterminate concrete structures in the time domain.