• Journal of the Korean Wood Science and Technology
• /
• v.47 no.4
• /
• pp.533-542
• /
• 2019

As energy costs increase, more people has become interested on energy efficiency and savings in residential buildings. The two main subjects related to energy in residential buildings are insulation and condensation. There are two approaches to prevent condensation; increasing air tightness and maintaining the temperature inside of the wall structure over the dew point, which is in turn related to insulation. Even though the Korean government has highlighted the importance of energy efficiency for residential housings, and in spite of the customers' demands, the timber construction industry is still using conventional light-frame construction without even trying to improve energy efficiency. In this study, various types and combinations of wall structures were tested under cold outdoor and warm indoor temperatures to analyse the temperature gradients and to determine the possible sites of condensation in the wall structures. In addition to the experimental tests, three theoretical models were developed and their estimations of temperature change through the wall structure were compared with the actual measurements to evaluate accuracy of the models. The results of the three models agree relatively well with the experimental values, indicating that they can be used to estimate temperature changes in wall structures. The theoretical analysis of different insulation layers' combinations show that condensation may occur within the mid-layer in the conventional light-frame wall structures for any combination of inner-, mid-, and outer-layers of insulation. Therefore, it can be concluded that the addition of an inner and outer insulation layer or increasing the thickness of insulation may not be adequate to prevent condensation in the wall structure without preventing penetration of warm moist air into the wall structure.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.7
• /
• pp.21-29
• /
• 2018

This study aimed to find and suggest the purpose of future plans, critical items on designing and Related standards to amend construction standards for domestic energy saving and environmentally friendly housings. It would also activate and increase the supplies of passive house minimizing the problems on current apartment housings in winter and reducing heating energy which brings fine dust pollution. After defining the standard model of Korean apartment housings(reference model), this study calculated the amount of heating energy demand per unit area annually as applying the yearly changed standards from 2008 to 2017 to existing standard model. It turned out that applying 2017 construction standards of energy saving and eco-friendly housings to reference model has saved up to 75% of heating energy demand comparing to the one applied 2008's. However, it still could not solve the fundamental problems such as winter fungus, condensation, freezing, freeze and burst, and insulation weakness space, and could not be free from fine dust particles. To solve them, this study suggested improved standards adding critical items on design related to outside insulation, cut off the heat-bridge, enforce air-tightness and heat change efficiency on heat recovery ventilator. As a result, it has reduced more than 10% of heat demand from 2017. It would be more than 90% of savings from 2008 if we make the amount of heat loss be zero on heat bridge on designing stage in the future.

• Textile Coloration and Finishing
• /
• v.33 no.2
• /
• pp.87-95
• /
• 2021

In this study, the application of a medical compression sleeve of Moisture Responded Transformable(MRT) fibers to the treatment of lymphedema after surgery in breast cancer patients was investigated. MRT fibers were manufactured with PET and Nylon6 bi-component cross-section yarns, and compression sleeves of sleeves 1, 2, 3, and 4 were knitted in order of size, and then the physical properties and clinical tests were evaluated. As a result, the pressure of compression sleeve in wrinkle was the lowest in sleeve 1 with 3.81 kPa, and the highest in sleeve 4 with 5.22 kPa. Elastic recovery rate is that all parts except the top of the sleeve 1 exhibited 100%. The air permeability was good at 12.1 ~ 16.1 cm³/cm²/sec, and peeling was also comparatively excellent as grade 3. In addition, the weight of the compression sleeves 1, 2, and 3 decreased as 18.3 ~ 23.0 g/m² depend on size, while the compared sample was heavier with 17.39 ~ 32.61 g/m². In lymphoscintigraphy test, it was confirmed that the function of remaining lymph node was good in all patients. Although there were no differences between samples in skin irritation and tightness in wearing comfort, the manufactured sleeves showed better fit, lightness, fashion and breathability than the comparable sleeves.

• Fashion & Textile Research Journal
• /
• v.23 no.6
• /
• pp.826-835
• /
• 2021

The purpose of this study was to compare the similarity between actual and virtual pants using a virtual 3D CLO program. A subject corresponding to the average size of a women in her twenties was selected and an avatar with the same specifications was produced. Silhouettes of the pants were classified into trousers, slacks, and wide pants and images of actual and virtual pants were evaluated from the front, side, and back. The results were as follows: Overall, the resemblance of the trousers was evaluated higher than that of other pants. The average similarity of trousers was 4.20 at the front, 3.98 at the side, and 4.17 at the back, which was much like the actual clothing. In contrast, that of the slacks was 3.62, 3.73, and 3.79 and of the wide pants was 3.81, 3.53, and 3.97. The similarity between the actual and virtual clothing was relatively well reproduced when the shape of the pants was like the silhouette of the human body. However, if the pants were tight or loose, virtual fits failed to display the wrinkles caused by the tightness or the excessive slack. The virtual fit showed fewer wrinkles and did not depict the location and the shape of hemlines as accurately as the actual fit, although virtual fits adequately displayed the baseline and dart on the pants.

• Geomechanics and Engineering
• /
• v.27 no.6
• /
• pp.583-594
• /
• 2021

The gas permeability behavior of unsaturated bentonite-based materials is of major importance for ensuring effective sealing of high-level radwaste repositories. This study investigated this by taking a sample of Granular Bentonite Material (GBM) at the end of the Engineered Barrier Emplacement (EB) experiment in the Opalinus Clay, placing it under different humidity conditions until it achieved equilibration, and testing the change in the gas permeability under loading and unloading. Environmental humidity is shown to have a significant effect on the water content, saturation, porosity and dry density of GBM and to affect its gas permeability. Higher sensitivity to confining pressure is exhibited by samples equilibrated at higher relative humidity (RH). It should be noted that for the sample at RH=98%, when the confining pressure is raised from 1 MPa to 6 MPa, gas permeability can be reduced from 10^-16 m² to 10^-19 m², which is close to the requirements of gas tightness. Due to higher water content and easier compressibility, samples equilibrated under higher RH show greater irreversibility during the loading and unloading process. The effective gas permeability of highly saturated samples can be increased by 2-3 orders of magnitude after 105℃ drying. In addition, cracks possibly occurred during the dehydration and drying process will become the main channel for gas migration, which will greatly affect the sealing performance of GBM.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.6
• /
• pp.171-179
• /
• 2020

This study was conducted to explore the experience of emotional change among senior citizens aged 65 and older experienced COVID-19 social situation. COVID-19 not only directly affects the elderly as a high-risk infectious disease, it also causes social isolation and depression caused by social distinctions, decreased cognitive skills, and worsened chronic diseases, and has indirect effects. As a result of the study, one component and four sub-components were derived, and the components were emotional changes. As the elderly experienced COVID-19, fear of spreading, fear of increasing the number of deceased and dead, and social distance I experienced depression, tightness, and anticipation for ending due to self-control. No matter how hard you try 'technical prevention', without 'psychological prevention', the anxiety of the elderly will inevitably increase. In this study, mediators for negative emotions experienced by the elderly are provided by providing accurate information to prevent the spread of fear caused by COVID-19 and proving emotional support programs such as 'psychological prevention' as well as 'technical prevention'. I think it will be necessary.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.2
• /
• pp.60-71
• /
• 2022

The reusable, low-cost launch vehicle development trend in the recent launch vehicle market is being subdivided into several ways, and the throttleable engine is one of them. Plus, several nations have selected methane as a next-generation propellant due to its cleanness. In this research, a throttleable pintle injector using gas methane and liquid oxygen as propellants was developed, followed by its spray and combustion characteristics analysis, including high pressure cold and hot tests. The designed throttleable pintle injector has a double sleeve structure, and its tightness and functionality are confirmed through repetitive atmospheric, high-pressure cold tests, and hot tests. Though some design errors were discovered and a low throttling level was unable to be achieved in the combustion test.

• Journal of Aerospace System Engineering
• /
• v.16 no.4
• /
• pp.53-59
• /
• 2022

Static seals are used to seal high temperature gas and cryogenic fluid under high pressure, at interfaces between liquid rocket engine components such as combustion chamber, turbopump, gas generator, valves, etc. As thermal expansion and contraction at assembly interfaces cause undesirable leakage under cryogenic and high temperature environments, static seals applied for sealing of joint interfaces without relative motion should be designed properly. The additional function of rotation at the sealing face is also required for static seals, when the spherical flange is used for improvement of assembly at misalignment interfaces. In this study, structural analysis and leak tightness test of simulating test rig for several important interfaces are performed, to verify structural integrity of static seals.

• Korean Journal of Culture and Social Issue
• /
• v.22 no.4
• /
• pp.643-674
• /
• 2016

The purpose of present study is to discover the meaning of the Eogul(억울) which is known as a emotion from perceived unfairness. Even though Eogul has been mentioned as a cause of the Hwabyung in Korean culture there were few studies about it. Researchers designed two studies to provide clear understanding for this concept. In study 1, researchers conducted an open-ended questionnaire for 44 participants to deduce the cultural contexts and the whole experience on Eogul. Data were analyzed with grounded theory, the results were cross-checked by different evaluators. According to the analysis, Eogul is not only the negative feelings from the perceived unfairness, but also the motivations and behaviors to resolve the feelings. Especially, what makes Eogul culture-bounded could be related display rules on expressing emotions. We conducted study 2 to clarify the cultural attributes of Eogul in Korean culture. Variables that explain cultural differences were chosen and 123 participants were surveyed with them including the items developed for measuring Eogul. Cultural meanings and implications of Eogul were discussed with the results.

• Physical Therapy Korea
• /
• v.30 no.1
• /
• pp.59-67
• /
• 2023

Background: Posterior capsule tightness (PCT), commonly seen in overhead athletes, is a soft tissue adaptation that is also noted in non-throwers. PCT is associated with scapular and humeral kinematic alterations, significant restriction of shoulder internal rotation (IR) range of motion (ROM), and significant scapular anterior tilting. Sleeper and cross-body stretches (CBS) are suggested for PCT and IR deficits, and have been modified since introduction. A novel modified sleeper stretch (NMSS) was designed in this study to prevent the risk of anterior translation of the humeral head. Though the effects of posterior shoulder stretching exercise have been widely studies, to the best of our knowledge, no previous studies have investigated the effectiveness of posterior shoulder exercises in decreasing scapular anterior tilting. Objects: To compare the immediate effects of two posterior shoulder stretching exercises (NMSS and CBS) on scapular anterior tilting and shoulder IR ROM. Methods: Thirty-two subjects with anteriorly tilted scapula and IR deficits [mean age: 24.3 ± 2.5 years; 15 males and 17 females] participated in this study. Subjects were randomly assigned to either the NMSS or CBS groups. Scapular anterior tilting (at rest and at shoulder 60° active IR) and shoulder IR ROM were measured before and immediately after intervention. Results: Scapular anterior tilting significantly decreased, while the shoulder IR ROM significantly increased in both groups. However, there was no significant group-by-time interaction effect or significant difference between the groups. Conclusion: Both stretching exercises were effective in restoring shoulder IR ROM and decreasing scapular anterior tilting.