DOI QR코드

DOI QR Code

Development of Static Seal for a Liquid Rocket Engine

액체 로켓 엔진 스태틱 실 개발

  • 전성민 (한국항공우주연구원 터보펌프팀) ;
  • 윤석환 (한국항공우주연구원 터보펌프팀) ;
  • 정태검 (한국항공우주연구원 발사체엔진팀)
  • Received : 2022.05.10
  • Accepted : 2022.07.05
  • Published : 2022.08.31

Abstract

Static seals are used to seal high temperature gas and cryogenic fluid under high pressure, at interfaces between liquid rocket engine components such as combustion chamber, turbopump, gas generator, valves, etc. As thermal expansion and contraction at assembly interfaces cause undesirable leakage under cryogenic and high temperature environments, static seals applied for sealing of joint interfaces without relative motion should be designed properly. The additional function of rotation at the sealing face is also required for static seals, when the spherical flange is used for improvement of assembly at misalignment interfaces. In this study, structural analysis and leak tightness test of simulating test rig for several important interfaces are performed, to verify structural integrity of static seals.

액체 로켓 엔진의 연소기, 터보펌프, 가스발생기, 밸브 등 주요 구성품 조립 부위에는 고압의 고온 가스와 극저온 유체의 기밀을 위해 스태틱 실이 사용된다. 스태틱 실은 조립 부위의 상대적 움직임이 없는 기밀 부위에 적용되는데, 극저온 및 고온 환경에서의 열팽창과 수축은 조립부에서 원치 않는 누설을 야기할 수 있기에 효과적인 스태틱 실 설계가 필수적이다. 조립성 개선을 위하여 비정렬 조립이 가능한 구면 플랜지가 체결부에 사용되는데, 구면 플랜지의 회전이 가능하도록 스태틱 실 역시 기능이 추가된 다. 본 연구에서는 스태틱 실 적용 주요 부위의 모사 플랜지 시험기를 제작하여 구조 해석과 함께 기밀시험을 수행하여 설계된 스태틱 실의 구조 건전성을 확인하였다.

Keywords

References

  1. S. M. Jeon, T. Chung, S. H. Yoon, and E. H. Jeong, "Development Status of Static Seal for KSLVII LRE," Proc. of 2017 SASE Spring Conference, Jeju, Korea, pp. 606-607, April 2017.
  2. S. M. Jeon, T. Chung, S. H. Yoon, and E. H. Jeong, "Development of Spherical Flange for KSLVII LRE High Pressure Pipe," Proc. of 2017 KSPE Fall Conference, Kangwon, Korea, pp. 1053-1054, December 2016.
  3. S. H. Yoon, S. M. Jeon, and J. Kim, "Analysis of Joints Using Metal Seals in Liquid Rocket Engine Turbopump," Journal of the Korean Society of Propulsion Engineers, Vol. 17, No. 6, pp. 105-112, 2013. https://doi.org/10.6108/KSPE.2013.17.6.105
  4. S. H. Yoon, S. M. Jeon, and J. Kim, "Design of Joints Using Metal Seals in Turbopump," Journal of Aerospace System Engineering, Vol. 8, No. 1, pp. 24-29, 2014. https://doi.org/10.20910/JASE.2014.8.1.024
  5. British Standard, Unfired Pressure Vessels - Part 3 : Design, BS EN 13445-3:2002, pp. 597-633, 2004.
  6. K. R. Rao, Companion Guide to the ASME Boiler & Pressure Vessel Code, Volume 2, Second Edition : Criteria and Commentary on Select Aspects of the Boiler & Pressure Vessel and Piping Codes, ASME, Chapter 40, pp. 8-9, 2006.