• 한국식품위생안전성학회지
• /
• 제19권2호
• /
• pp.97-103
• /
• 2004

Piperophos에 대한 광분해 실험을 수행하여 속도상수와 분해생성물을 측정하였다. 햇빛을 이용한 광분해 실험은 2003년 10월 3일부터 10월 22일 까지 하였으며 상당기간 동안 농약이 햇빛에 안정함을 확인할 수 있었고, humic acid의 광관여 효과가 없음을 알 수 있었다. 자외선을 이용한 광분해 실험에서 piperophos는 자외선을 단독 조사하였을 때 자외선의 세기가 클수록 상대적으로 빠르게 분해되었으며, 광분해 촉매제인 TiO$_2$를 첨가하였을 경우에는 첨가하지 않고 자외선만 조사한 경우보다 상대적으로 느리게 분해되었다. 또, TiO$_2$의 양을 증가시켜도 별 차이가 없었다. 광분해에 의한 분해산물을 확인하고자 UMS분석을 한 결과 piperophos의 분해생성물은 m/z=166의 O,O-dipropyl phosphorodithioate로 추정된다.

• 한국결정성장학회지
• /
• 제11권5호
• /
• pp.231-237
• /
• 2001

Etch rates up to 120 nm/min for $Ta_{2}O_{5}$ were achieved in both $SF_{6}/Ar$ and $Cl_{2}/Ar$ discharges. The effect of ultraviolet (UV) light illumination during ICP etching on $Ta_{2}O_{5}$ etch rate in those plasma chemistries was examined and UV illumination was found to produce significant enhancements in $Ta_{2}O_{5}$ etch rates most likely due to photoassisted desorption of the etch products. The effects of ion flux, ion energy, and plasma composition on (Ba, Sr)$TiO_3$ etch rate were examined and maximum etch rate ~90 nm/min was achieved in $Cl_{2}/Ar$ ICP discharges while $CH_{4}/H_{2}/Ar$ chemistry produced extremely low etch rates (${\leq}10\;nm/min$) under all conditions.

• 한국결정성장학회지
• /
• 제18권4호
• /
• pp.165-168
• /
• 2008

동시스퍼터법을 이용하여 Ta이 도핑된 $TiO_2$ 박막을 석영 및 ITO 기판위에 제작하였다. Ta의 도핑량은 동시스퍼터법에 의하여 조절되는 Ta 금속선 길이에 의하여 제어 되었다. Ta이 도핑된 $TiO_2$ 박막은 rutile상에서 anatase상으로 구조변화를 유발 시키며 고용체를 형성했다. Ta의 도핑량이 증가함에 따라 rutile상 보다는 anatase상이 많은 것으로 나타났다. XPS 분석에 따르면 도핑된 Ta은 금속이 아닌 $Ta_2O_5$의 산화물을 형성하는 것으로 나타났다. Ta이 도핑된 $TiO_2$ 전극에서는 자외선(UV) 영역을 포함하여 가시광(VIS) 영역의 빛의 조사에 광전류응답 특성을 발현하였다. 가시광선 영역에서 발현된 광전류 응답 특성은 Ta 도핑에 의하여 $TiO_2$ 밴드갭내에 불순물 준위의 형성에 기인한 것으로 사료된다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권12호
• /
• pp.567-572
• /
• 2002

In these days, diesel vehicle or power plant emits $NO_X\; and SO_2$ which cause air pollution like acid-rain, ozone layer destroy and optical smoke, therefore there are many kinds of methods considered for removing them such as SCR, catalyst, plasma process, and plasma-catalyst hybrid process. T$TiO_2$ is commonly used as catalyst to remove $NO_X$ gas because it have very excellent chemical characteristic as photo catalyst. In this paper, $NO_X$ sensing characteristic of $TiO_2$ thin film deposited by R.F Magnetron sputtering is investigated. A finger shaped electrode on $Al_2$O$_3$ substrate is designed and $TiO_2$ is deposited on the electrode by the magnetron sputtering deposition system. Chemical composition of the deposited $TiO_2$ thin film is $TiO_{1.9}$ by RBS analysis. When the UV is irradiated on it with flowing air, capacitance of $TiO_2$ thin film increases, however, when NO gas is put into the system with air, it immediately decreases because of photo chemical reaction. and it monotonously decreases with increasing NO concentration.

• 한국식품과학회지
• /
• 제47권6호
• /
• pp.733-737
• /
• 2015

나노 $TiO_2$ 코팅 필름은 식품 포장재에서 많이 사용하는 PU와 PVB-cellulose 두 가지 바인더에 나노 콜로이달 $TiO_2$를 각각 3%와 5%의 농도로 혼합제조하여 OPP 필름에 코팅하였다. PVB 바인더로 코팅한 필름이 PU 바인더(3%와 5%)보다 불균일하게 필름에 코팅이 되었다. 그러나 청변현상 방지 실험과 광분해 실험에서는 필름 코팅 상태와 상관없이 선도 유지 효과가 나타났다. MB를 사용한 광분해성 효과 측정 실험에서 나노 $TiO_2$의 광촉매 반응으로 인해 초기 30분부터 MB가 분해되는 것을 확인하였고, 콩나물 포장재 내에서 혐기성 호흡으로 발생하는 이취인 acetaldehyde는 나노 $TiO_2$ 코팅 필름이 대조구에 비해 농도가 감소하는 것을 확인하였다. 따라서 개발된 나노 $TiO_2$ 코팅 필름으로 콩나물의 청변 현상과 이취 제거로 인해 콩나물의 보관 수명을 연장할 수 있었다.

• 한국대기환경학회지
• /
• 제17권4호
• /
• pp.363-370
• /
• 2001

In this study, TiO$_2$, the popular photocatalyst, was used to decompose ethanol. TiO$_2$was prepared by the sol -gel method and coated on pyrex stick. A 15W, UV-A lamp was used as the UV light source and il gas chromatography (HP 5890) was used to confirm the concentrations of ethanol, $CO_2$and the intermediates. Variation of preparation parameters and calcination temperature for TiO$_2$photocatalysts in the sol -gel method caused changes of ethanol decomposition activity. The best ethanol photodecomposition activity was obtained on the sample when prepared with 0.14 mol of HCI, a mol of ethanol and 1.3 mol of TTIP ware mixed in sol-gel process and calcinated at 50$0^{\circ}C$ for 3 hours. Acetaldehyde was detected as an intermediate and decomposed to carbon dioxide and water at the end of the reaction.

• 한국대기환경학회지
• /
• 제26권6호
• /
• pp.649-656
• /
• 2010

Boron-doped $TiO_2$ photocatalysts were synthesized by a modified sol-gel method and their photocatalytic activities were performed and compared with those of pure synthetic and commercial $TiO_2$ catalysts under UV or visible light conditions. Pure $TiO_2$ itself exhibited very negligible photocatalytic performance under visible light conditions in the aspects of toluene decomposition reactions, although significant decomposition potential was observed as expected with UV light conditions. However, boron doping over $TiO_2$ significantly improved photocatalytic activity particularly under visible conditions, where over 95% degradation of toluene was achieved with 1wt% $B-TiO_2$ within 2 hrs. All the decomposition reactions seemed to follow pseudo first-order kinetics. The effects of boron-doping and its characteristics are further discussed through the kinetic studies and comparison of results.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.486-496
• /
• 2018

Bimetallic Pd@Ni nanostructure exhibited enhanced co-catalytic activity for the selective hydrogenation of benzaldehyde compare to their monometallic counterparts. Impregnation of these mono/bimetallic nanostructures on mesoporous $TiO_2$ leads to several surface modifications. The bimetallic PNT-3 ($Pd_3@Ni_1/mTiO_2$) exhibited large surface area ($212m^2g^{-1}$), and low recombination rate of the charge carriers ($e^--h^+$). The hydrogenation reaction was analyzed under controlled experiments. It was observed that under UV-light irradiations and saturated hydrogen atmosphere the bimetallic PNT-3 photocatalyst display higher rate constant $k=5.31{\times}10^{-1}h^{-1}$ owing to reduction in the barrier height which leads to efficiently transfer of electron at bimetallic/$mTiO_2$ interface.

• Bulletin of the Korean Chemical Society
• /
• 제22권12호
• /
• pp.1366-1370
• /
• 2001

Thin films of the SiO2-TiO2-PDMS composite material have been prepared by the sol-gel dip coating method. Acid catalyzed solutions of tetraethoxy silane (TEOS) and polydimethyl siloxane (PDMS) mixed with titanium isopropoxide Ti(OiPr) were used as precursors. The optical and structural properties of the organically modified 70SiO2-30TiO2 composite films have been investigated with Fourier Transform Infrared Spectroscopy (FT-IR), UV-Visible Spectroscopy (UV-Vis), Differential Thermal Analysis (DTA) and prism coupling technique. The films coated on the soda-lime-silicate glass exhibit 450-750 nm thickness, 1.56-1.68 refractive index and 88-94% transmittance depending on the experimental parameters such as amount of PDMS, thermal treatment and heating rate. The optical loss of prepared composite film was measured to be about 0.34 dB/cm.

• Environmental Engineering Research
• /
• 제19권3호
• /
• pp.215-221
• /
• 2014

Nano-sized $TiO_2$ particles were produced by a premixed flame aerosol reactor, and they were immobilized on a mesh-type substrate in form of particulate film. The reactor made it possible maintaining the original particulate characteristics determined in the flame synthetic process. The particulate morphology and crystalline phase were not changed until the particulate were finally coated on the substrate, which resulted in the better performance of the photocatalytic conversion of the volatile organic compounds (VOCs) in the ultraviolet $(UV)-TiO_2$ system. In the flame aerosol reactor, the various specific surface areas and the anatase weight fractions of the synthesized particles were obtained by manipulating the parameters in the combustion process. The performance of the $TiO_2$ particulate films was evaluated for the destruction of the VOCs under the various UV irradiation conditions. The decomposition rates of benzene and formaldehyde under the irradiation of UV-C of 254 nm in wavelength were evaluated to check the performance of $TiO_2$ film layer to be applied in air quality control system.