• Journal of the Korean institute of surface engineering
• /
• v.35 no.4
• /
• pp.199-205
• /
• 2002

TiN and TiAlN films were deposited on SKD 11 steel substrates by an arc ion plating (AIP) technique. The crystallinity and morphology for the deposited films were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The mechanical properties of both films were investigated through the indentation, impact, and wear test. Those films fairly adherent to SKD 11 steel substrate, showed hardness values of 2300 $\pm$ 100kg/$\textrm{mm}^2$ and 3200 $\pm$ 100kg/$\textrm{mm}^2$ with a load of 25g, respectively. During impact test, TiAlN films showed much superior impact wear resistance to TiN films. It could be suggested that the TiN films was failed relatively by plastic deformation with oxidation during impact test, while TiAlN films was failed by brittle fracture and resisted the oxidation by the impact energy. The friction coefficient of TiAlN films became lower than that of TiN films at high sliding speed condition although it was higher than that of TiN films at low speed. Therefore, TiAlN films was suggested to be more advantageous than TiN films for high speed machining fields.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc1
• /
• pp.149-153
• /
• 2012

Ti2AlN MAX-phase films were synthesized through the post-annealing process of as-deposited Ti-Al-N films. Near amorphous or quasi-crystalline ternary Ti-Al-N films were deposited on Si and Al2O3 substrates by sputtering a Ti2AlN MAX-phase target at room temperature, 300 ℃ and 450 ℃, respectively. A vacuum annealing of those films at 800 ℃ for 1 hour changed those films to crystalline Ti2AlN MAX-phase. The polycrystalline Ti2AlN MAX-phase films exhibited very excellent oxidation resistance due to its characteristics microstructure (nanolaminates), which has potential applications for high-temperature protective coatings. The microstructure and composition of Ti2AlN MAX-phase films were investigated using with a variety of characterization tools.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.304-304
• /
• 2014

Quaternary Ti-Al-Si-N films were deposited on WC-Co substrates by a hybrid deposition system of arc ion plating (AIP) method for Ti-Al source and DC magnetron sputtering technique for Si incorporation. The synthesized Ti-Al-Si-N films were revealed to be composites of solid-solution (Ti,Al)N crystallites and amorphous $Si_3N_4$ by instrumental analyses. The Si addition in Ti-Al-N films affected the refinement and uniform distribution of crystallites by percolation phenomenon of amorphous silicon nitride, similarly to Si effect in TiN film. As the Si content increased up to about 9 at.%, the hardness of Ti-Al-N film steeply increased from 30 GPa to about 50 GPa. The highest microhardness value (~50 GPa) was obtained from the Ti-Al-Si-N film having the Si content of 9 at.%, the microstructure of which was characterized by a nanocomposite of $nc-(Ti,Al)N/a-Si_3N_4$.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.7
• /
• pp.47-59
• /
• 1993

The thermal stability of "stuffed" TiN/Ti barrier matals with different annealing history has been studied to improve the contact reliability of Al/Si contacts in 16M DRAM. The annealing conditions before the Al deposition such as film thickness, the annealing temperature and the annealing ambient have been varied. For TiN(900A)/Ti(300A) annealed at 450 in nitrogen ambient to form a "stuffed barrier" by inducing oxygen atoms into grain boundaries, there is no observation of Al penetrations into Si substrates after the post heat treatment of up to 700 even though there are massive amounts of Al found in TiN film after the post heat treatment of 600 indicating that TiN has a "sponge-like" function due to its ability to absorb several amounts of aluminum at elevated temperature. The TiN/Ti diffusion barrier annealed at 550 has, however, failed after the post heat treatment at 600. The thinner diffusion barriers with TiN(300A)/Ti(100A) failed after the post heat treatment at 600.he post heat treatment at 600.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.130-130
• /
• 2018

산업 발전으로 특수합금들이 발달함에 따라 가공할 수 있는 새로운 절삭공구소재들이 개발되어지고 있다. 또한 공구소재보다 코팅개발이 상대적으로 더욱 효과적이기 때문에 코팅 기술 개발이 활발히 진행되고 있다. 일본에서는 새로운 코팅층 물질 개발보다는 기존의 코팅물질을 조합하거나 개량하여 성능을 향상시키는 추세이다. TiAlSiN 박막은 스퍼터링과 음극 아크 소스를 이용한 hybrid 공정을 이용하여 코팅 후 특성을 평가하였다. Ti-50at.%Al의 조성을 갖는 TiAl 합금 타겟은 음극 아크 소스를 이용하여 코팅하였다. 공정 가스는 Ar과 N2의 혼합 가스를 사용하였으며 공정 압력은 $1.0{\times}10^{-2}Torr$이었다. 음극 아크 소스에 인가된 전류는 70 A이었다. TiAlSiN 박막의 Si 함량을 조절하기 위해서 Si은 스퍼터링으로 코팅하였으며 스퍼터링 소스에 인가되는 전력의 세기를 0.29 kW ~ 1.05 kW까지 변화시켰다. 코팅 공정에 사용된 Si 타겟의 순도는 4N이다. TiAlSiN 박막의 Si 함량은 스퍼터링 전력에 따라 3.4 ~ 14.4at%까지 변화하는 것을 확인하였다. TiAlSiN 코팅층의 경도는 초미소 경도계를 이용하여 측정하였으며, Si 함량이 증가하면 TiAlSiN 박막의 경도도 증가하는 것을 확인할 수 있다. TiAlSiN 박막의 Si 함량이 9.2at.%일 때 3000 Hv 이상의 경도를 보였다. TiAlSiN 코팅층의 Si 함량이 14.4at%로 높아지면 경도가 낮아지는 현상을 보였다. TiAlSiN 박막의 Si 함량이 증가하면 내산화성이 향상되는 현상을 확인할 수 있었다.

• Journal of the Korean institute of surface engineering
• /
• v.31 no.3
• /
• pp.157-164
• /
• 1998

Effects of alloying elements on the pitting behavior of Ti-Al intermetalic compounds in the electrolytic soution containing Cl- were investigated through electrochemical tets and corrosion morphologies. Corrosion potential increased in the case of Cr addition to Ti-48%Al, whereas it decreased in the case of Si and B addition. The simultaneous addition of Cr and Si increased passive current density and decrosion corrosion potential. The passive current density of N addtion was higher than that of B addition in H2SO4 solution. With the addition of alloying elements, The pitting resistance decreased in order of TiAl>TiAlSi>TiAlN>TiAlB>TiAlCr and whin siumultaneous addition, it decreased in order of TiAlCrSi>TiAlCrBN>TiAlCrrN. The surface merohology after pitting test showed that the TiAl coataining Si had for fewer pits than that containing Cr and N simultaneously.

• Corrosion Science and Technology
• /
• v.12 no.3
• /
• pp.119-124
• /
• 2013

Nano-multilayered, crystalline AlTiSiN thin films were deposited on WC-TiC-Co substrates by the cathodic arc plasma deposition. The deposited film consisted of wurtzite-type AlN, NaCl-type TiN, and tetragonal $Ti_2N$ phases. Their oxidation characteristics were studied at 800 and $900^{\circ}C$ for up to 20 h in air. The WC-TiC-Co oxidized fast with large weight gains. By contrast, the AlTiSiN film displayed superior oxidation resistance, due mainly to formation of the ${\alpha}-Al_2O_3$-rich surface oxide layer, below which an ($Al_2O_3$, $TiO_2$, $SiO_2$)-intermixed scale existed. Their oxidation progressed primarily by the outward diffusion of nitrogen, combined with the inward transport of oxygen that gradually reacted with Al, Ti, and Si in the film.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.396-396
• /
• 2012

산업 분야에서 TiN, CrN, CrAl-N, TiAl-N과 같은 Hard 코팅들은 기계적 특성이 우수하여 절삭 공구, 기계 부품분야에서 많이 사용되고 있다. 최근 연구 동향을 살펴보면 기존에 하나 또는 두가지 합금상태의 Hard 코팅을 넘어서 제3원소, 제4원소를 첨가하여 미세 구조적 변화를 통해 기존의 우수한 특성에 고온안정성, 내식성, 내산화성 등 다양한 기능성을 부여하는 다기능성 연구가 활발히 진행 중이다. 본 연구에서는 마그네트론 스퍼터를 이용하여 고경도 코팅인 Ti-Al계열에 Si, Cu, Cr, B을 첨가함에 따른 내식특성을 확인해보았다. 성분이 균일한 코팅을 만들기 위해 Ti-Al, Ti-Al-Si, Ti-Al-Cu, Ti-Al-Cr, Ti-Al-B 단일합금타겟을 제조하여 실험을 진행하였다. 기본 물성을 확인하기 위해 경도 측정과 SEM XRD 등을 분석하였다. 내식성 평가는 동전위 테스트와 염수분무 테스트를 진행하였고 전해질은 염수와 동일한 5%-NaCl로 진행하였다. 그 결과 Ti-Al-Cr이 내식성에 강한 것으로 나타났고 염수분무 실험에서도 1200시간 이상 지속되는 성과를 보였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.255-255
• /
• 2015

나노압침방법을 적용하여 arc ion plating을 통해 제조된 TiAlSiN 코팅층의 질소 함량에 따른 나노 기계적 특성을 평가하였다. 코팅층의 질소 함량은 28~30 [at.%] 이었다. 코팅층에는 AlN, TiSi, $Al_5Ti_3$, $Ti_3AlN$, $Al_5Ti_2$ 상이 형성되었다. 질소 함량이 더 작은 코팅층의 나노경도, 마찰계수, 피로한계의 값이 높아짐을 알 수 있었다.

• Journal of the Korean institute of surface engineering
• /
• v.43 no.6
• /
• pp.278-282
• /
• 2010

In this research, the friction and wear characteristic behaviors of coating materials of TiAlN and CrAlN were investigated. The wear test was conducted in air and un-lubricated state using the reciprocating friction wear tester. Temperature were 50 and $120^{\circ}C$, and load were 3, 7, and 11 kgf for tests. By comparing the coefficient of friction and observing the wear microstructure, the friction and wear characteristic behaviors of TiAlN and CrAlN coating layers on SKD61 were investigated. The coefficient of friction of CrAlN coating was lower than that of TiAlN at all conditions. Therefore, CrAlN was suggested to be more advantageous coating than TiAlN for the extrusion mold of aluminum.