• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1175-1177
• /
• 2011

The SBN thin films were deposited on Pt/Ti/$SiO_2$/Si and p-type Si(100) substrate by rf magnetron sputtering method using $Sr_{0.7}Bi_{2.3}Nb_2O_9$ ceramic target. SBN thin films deposited were annealed at 600~800[$^{\circ}C$] by furnace in oxygen atmosphere during 40min. The polarization characteristics have been investigated to confirm the possibility of the SBN thin films for the application to destructive read out ferroelectric random access memory. The maximum remanent polarization and the coercive voltage are 0.6[${\mu}C/cm^2$], 1.2[V] respectively at annealing temperature of 800[$^{\circ}C$]. The leakage current density was the $2.57{\times}10^{-6}[A/cm^2]$ at an applied voltage of 5[V] at annealing temperature of 650[$^{\circ}C$]. Also, the fatigue characteristics of SBN thin films did not change up to $10^8$ switching cycles.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1992.11a
• /
• pp.39-40
• /
• 1992

This paper dealt with the manufacturing of binary alloy catalyst and showed simple electrochemical method for determing catalytic activity of oxygen reduction in acid or alkaline electrolyte. The catalyst was prepared by impregnating transition metal salts on platinum or silver particles adsorbed before on carbon paper substrate. The electrochemical characteristics of the catalysts was investigated with carbon paper electrode or PTFE-boned porous electrode and then cathodic current densities and tafel slopes were compared. As a result, of all binary catalysts utilized in this work, Pt-Fe, Pt-Mo showed better oxygen reduction activity than pure platinum catalyst in acid electrolyte and Ag-Fe, Ag-Pt, and Ag-Ni-Bi-Ti catalyst did than pure silver catalyst in alkaline electrolyte. The current density of Pt-Fe electrode in acid electrolyte was one and half times higher than that of Pt electrode(~500mA/$\textrm{cm}^2$ at 0.7VvsNHE).

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.538-540
• /
• 2009

The SBN thin films were deposited at substrate temperature of 300[$^{\circ}C$] on Pt-coated electrode (Pt/Ti/$SiO_2$/Si(100)) using RF sputtering method. The grain and crystallinity of SBN thin films were increased with the increase of annealing temperature. The dielectric constant(150) of SBN thin film was obtained by annealing temperature above 750[$^{\circ}C$]. The voltage dependence of dielectric loss showed a value within 0.01 in voltage ranges of -5~+5[V]. The capacitance characteristics showed a stable value of about 0.7[${\mu}F/cm^2$].

• Proceedings of the KIEE Conference
• /
• 2008.10a
• /
• pp.121-122
• /
• 2008

The films of the vanadium tungsten oxide, $V_{1.85}W_{0.15}O_5$, were grown on Pt/Ti/$SiO_2$/Si substrate by RF sputtering method. It was found that film crystallinity, dielectric properties, and TCR properties were strongly dependent upon the thin film thickness. As increasing of $V_{1.85}W_{0.15}O_5$ thickness, the grain size, morphology, and crystallinity increased. The dielectric constants of $V_{1.85}W_{0.15}O_5$ thin films deposited at 150nm were 71.11, with a dielectric loss of 0.015, respectively. Also, The $V_{1.85}W_{0.15}O_5$ thin films showed good TCR values of -3.45%/K.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.335-338
• /
• 1998

Ferroelectric Sr$_2$(Nb,Ta)$_2$O$_{7}$ (SNTO) thin films were prepared by chemical solution deposition processes. SNTO thin films were spin-coated on Pt/Ti/SiO$_2$/(100)Si substrates. After multiple coating, dried thin films were heat-treated for decomposition of residual organics and crystallization. B site-rich impurity phase, i.e. [Sr(Nb,Ta)$_2$O$_{6}$], was found after annealing, where its appearance was dependent on process temperature indicating the possible reaction with substrate. Dielectric and other relevant electrical properties were measured and the results showed a little possibility in ferroelectric gate random access memory devices.s.s.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.247-250
• /
• 1998

Ferroelectric PZT(10/90)PZT(90/10) heterolayered thin films were fabricated by spin-coating method on the Pt/Ti/SiO$^2$/Si substrate alternately using PZT(10/90) and PZT(90/10) metal alkoxide solutions. The coating and heating procedure was repeated six times to form PZT heterolayered films. The surface, cross-sectional microstructures and thickness of the films were observed using scanning electron microscope(SEM). The relative dielectric constant and dielectric loss of the 5-coated PZT heterolayered films were 1331 and 4.8% respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1997.07a
• /
• pp.114-114
• /
• 1997

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.855-858
• /
• 2003

Carbon nanotubes (CNTs) were grown on Ni-coated TiN/Si substrate by microwave plasma chemical vapor deposition using mixture gas of $H_2/CH_4$ at low temperature of 500 $^{\circ}C$. Average diameter of CNTs could be easily controlled by $H_2$ plasma pretreatment time before CNTs growth. The turn-on voltages of CNT emitters were varied from 3.5 $V/{\mu}m$ to 9 $V/{\mu}m$ according to the hydrogen pretreatment conditions. The close relationship between electron emission characteristics and pretreatment time indicates that pretreatment condition can be a key process parameter in CNTs growth for field emission displays..

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1475-1477
• /
• 2001

In odor to set high saturation magnetization and coercivity, it had need to orient axis of easy magnetization of CoCr-based thin film perpendicular direction(c-axis) to the substrate plane. It was known that crystalline orientation of CoCr-based thin film was improved by introducing underlayer like Ti, Ge. We prepared singlelayer and double layer with Si underlayer by Facing Targets Sputtering System. As a result, intensity and c-axis dispersion angle ${\Delta}{\theta}_{50}$ of singlelayer were improved with increasing film thickness. Also, it was found that CoCr/Si and CoCrTa/Si double layer showed good c-axis dispersion angle due to introducing Si.

• The Korean Journal of Ceramics
• /
• v.6 no.1
• /
• pp.68-73
• /
• 2000

The effects of oxygen annealing on the carbon content in MgO thin films were investigated, MgO thin films were deposited on Si(100) substrate at different temperatures of 400 to $700^{\circ}C$ and different deposition rates of 3.4 to 11.6$\AA$/min. Using rf magnetron sputtering method. Carbon content change on the surface of MgO thin films with the oxygen annealing at different temperatures was investigated using various method. The carbon content decreased as the annealing temperature increased. $Pb(Zr_{0.53}Ti_{0.47})O_3$(PZT) thin films were deposited on the MgO/Si(100) substrates. The effects of carbon content on the phase formation and the electrical properties of PZT thin films were also investigated.