• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.349-352
• /
• 2010

본 논문에서 우리는 DiffServ 환경에서 멀티미디어 서비스가 요구하는 품질 수준을 고려하는 QoS-aware AQM(Active Queue Management) 방안을 제안한다. 지연과 손실에 민감한 IPTV 및 VoIP와 같은 실시간 멀티미디어 서비스의 사용 증가로 인해 QoS 제공은 필수적이며, 이에 따라 응용계층에서 명시된 QoS 요구 수준을 네트워크 계층에서 인식하여 전달망에서 QoS를 제공할 수 있는 큐 관리 방안이 필요하다. 기존 DiffServ의 수정된 DSCP 필드를 이용하여 요청된 QoS 품질 정보를 네트워크 장비에 전달하고 해당 서비스의 지연 및 손실률 요구 수준에 대한 threshold margin을 도출하고 이 범위 내에서 큐의 임계값을 능동적으로 제어함으로써 종단간 IPTV 및 VoIP와 같은 멀티미디어 서비스의 QoS를 보장할 수 있다.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.7
• /
• pp.37-45
• /
• 1998

A 32-b self-timed parallel carry look-ahead adder (PCLA) designed for 0.5.mum. single threshold low power CMOS technology is demonstrated to operate with 2.7nsec delay at 8mW under 1V power supply. Compared to static PCLA and DPL adder, the self-timed PCLA designed with NORA logic provides the best performance at the power consumption comparable to other adder structures. The wave pipelined clock control play a crucial role in achieving the low power, high performance of this adder by eliminating the unnecessary power consumption due to the short-circuit current during the precharge phase. Th enoise margin has been improved by adopting the physical design of staic CMOS logic structure with controlled transistor sizes.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.8
• /
• pp.497-500
• /
• 2014

In this paper, we analyze electrical characteristics of n/p-pillar layer according to trench angle which is the most important characteristics of SJ MOSFET and core process. Because research target is 600 V class SJ MOSFET, so conclusively trench angle deduced 89.5 degree to implement the breakdown voltage 750 V with 30% margin rate. we found that on resistance is $22mohm{\cdot}cm^2$ and threshold voltage is 3.5 V. Moreover, depletion layer of electric field distribution also uniformly distributes.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3643-3652
• /
• 2021

Sizing the tube inlet orifice of a Once-Through Steam Generator (OTSG) is important to protect the integrity of the tubes from thermal cycling and vibration wear. In this study, a new sizing criterion is proposed for the tube inlet orifice to suppress the parallel channel instability in an OTSG. A perturbation method is used to capture the essential parts of the thermal-hydraulic phenomena of the parallel channel instability. The perturbation model of the heat transfer regime boundaries is identified as a missing part in existing models for sizing the OTSG tube inlet orifice. Limitations and deficiency of the existing models are identified and the reasons for the limitations are explained. The newly proposed model can be utilized to size the tube inlet orifice to suppress the parallel channel instability without excessive engineering margin.

• Information Systems Review
• /
• v.24 no.4
• /
• pp.23-40
• /
• 2022

Although Support Vector Machine(SVM) has been used in various fields such as bankruptcy prediction model, the hyperplane learned by SVM in class imbalance problem can be severely skewed toward minority class and has a negative impact on performance because the area of majority class is expanded while the area of minority class is invaded. This study proposed optimized uneven margin SVM(OPT-UMSVM) combining threshold moving or post scaling method with UMSVM to cope with the limitation of the traditional even margin SVM(EMSVM) in class imbalance problem. OPT-UMSVM readjusted the skewed hyperplane to the majority class and had better generation ability than EMSVM improving the sensitivity of minority class and calculating the optimized performance. To validate OPT-UMSVM, 10-fold cross validations were performed on five sub-datasets with different imbalance ratio values. Empirical results showed two main findings. First, UMSVM had a weak effect on improving the performance of EMSVM in balanced datasets, but it greatly outperformed EMSVM in severely imbalanced datasets. Second, compared to EMSVM and conventional UMSVM, OPT-UMSVM had better performance in both balanced and imbalanced datasets and showed a significant difference performance especially in severely imbalanced datasets.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.9C
• /
• pp.829-835
• /
• 2002

DSL(digital subscriber line) transceiver designers have concerned the impulsive noise as well as NEXT(near-end crosstalk) and FEXT(far-end crosstalk) immunities Down as the strongest sources that limit the DSL channel capacity. In these noise environment the analysis on the performance of DSL should be needed. Therefore, in this paper we have estimated and simulated the SNR(signal-to-noise ratio) margin of DMT(discrete multi-tone) signal in Gauss, NEXT, FEXT and impulse noise environment by modeling an Middleton's Class A impulse signal with the test Cook pulses. As a result, it is known that the transmission rate of uplink is limited by noise characteristics rather than by loop length, but that of downlink limited complexly by both of noise characteristics and loop length. In conclusion, these results will be utilized as the threshold of ADSL performance in the complex noise environment including impulse noise.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.9-16
• /
• 2017

In this paper, we introduce a warning message providing methodology by considering the elderly's walking behavior in V2P(: Vehicle-to-Pedestrian) communication systems. Using the elderly's accident records in Kyounggi-do area from 2011 to 2014, the elderly's accident behaviors are analyzed by categorizing accidents as road type (single road/ crossing road), existence of traffic signal (with signal/ without signal), existence of crosswalk (crosswalk/ jaywalk), cause of accident (jaywalk/ signal violation/ carelessness accident/ Etc.). In addition, the elderly's behavior variable and vehicle speed are applied, then some threshold values are utilized in a warning message providing in conflict area. Finally, we propose a distance which can protect an accident depending on the elderly's walking speed, safety margin and vehicle speed. By applying the results of this research to the V2P/P2V communication based road safety message providing system with the elderly's walking behavior, it may be helpful to reduce accident rate of the elderly.

• Journal of IKEEE
• /
• v.12 no.3
• /
• pp.176-183
• /
• 2008

The high efficiency power management IC(PMIC) with DTMOS(Dynamic Threshold voltage MOSFET) switching device is proposed in this paper. PMIC is controlled with PWM control method in order to have high power efficiency at high current level. DTMOS with low on-resistance is designed to decrease conduction loss. The control parts in Buck converter, that is, PWM control circuits consist of a saw-tooth generator, a band-gap reference circuit, an error amplifier and a comparator circuit as a block. The Saw-tooth generator is made to have 1.2 MHz oscillation frequency and full range of output swing from ground to supply voltage(VDD:3.3V). The comparator is designed with two stage OP amplifier. And the error amplifier has 70dB DC gain and $64^{\circ}$ phase margin. DC-DC converter, based on Voltage-mode PWM control circuits and low on-resistance switching device, achieved the high efficiency near 95% at 100mA output current. And DC-DC converter is designed with LDO in stand-by mode which fewer than 1mA for high efficiency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.4
• /
• pp.396-405
• /
• 2009

This paper describes playback downlink and telecommand uplink channel design performed for a transportable small-sized KOMPSAT(Korea Multi-Purpose Satellite) ground station. As a result of downlink channel design, required receiving performance was calculated from the threshold signal-to-noise ratio of playback signal and it was revealed that this performance can be guaranteed in 1.5 m ground station with 6.5 dB/K of G/T. For the uplink channel design, 40 dBW of EIRP was derived from the threshold signal-to-noise ratio of telecommand signal received at on-board receiver. The implemented small-sized ground station based on design was evaluated to be fully acceptable for KOMPSAT TT&C(Telemetry, Tracking and Command) system and playback downlink design without taking account of additional 3 dB system link margin was shown to be effective because it had provided constantly initial channel performance without any remarkable degradation over several years of tests with KOMPSAT and KOMPSAT-2, for both uplink and playback downlink in the elevation angle above $10^{\circ}$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.11
• /
• pp.47-53
• /
• 2006

The power losses due to modulation index for multi-modulation scheme were analyzed under various transmission mode of satellite control and the necessary satellite link margin for transmission mode were proposed in this paper On the basis of the analyses for interference between the transmission signals and threshold of satellite control signal receiver, the optimal subcarrier signals were proposed for satellite range measurement methods, respectively. The subcarrier signal of 12 kHz or 14 kHz is proper for telecommand using the ESA method, and 16 kHz for telecommand signal using the GSTDN method. On the other hand, the telemetry subcarrier of 65.536 kHz is a proper in the viewpoint of receiver threshold value.