• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.1
• /
• pp.1-17
• /
• 2002

The purpose of this study is to examine the possibility of thermal injury to bone tissues during an implant site preparation under the same condition as a typical clinical practice of $Br{\aa}nemark$ implant system. All the burs for $Br{\aa}nemark$ implant system were studied except the round bur The experiments involved 880 drilling cases : 50 cases for each of the 5 steps of NP, 5 steps of RP, and 7 steps of WP, all including srew tap, and 30 cases of 2mm twist drill. For precision drilling, a precision handpiece restraining system was developed (Eungyong Machinery Co., Korea). The system kept the drill parallel to the drilling path and allowed horizontal adjustment of the drill with as little as $1{\mu}m$ increment. The thermocouple insertion hole. that is 0.9mm in diameter and 8mm in depth, was prepared 0.2mm away from the tapping bur the last drilling step. The temperatures due to countersink, pilot drill, and other drills were measured at the surface of the bone, at the depths of 4mm and 8mm respectively. Countersink drilling temperature was measured by attaching the tip of a thermocouple at the rim of the countersink. To assure temperature measurement at the desired depths, 'bent-thermocouples' with their tips of 4 and 8mm bent at $120^{\circ}$ were used. The profiles of temperature variation were recorded continuously at one second interval using a thermometer with memory function (Fluke Co. U.S.A.) and 0.7mm thermocouples (Omega Co., U.S.A.). To simulate typical clinical conditions, 35mm square samples of bovine scapular bone were utilized. The samples were approximately 20mm thick with the cortical thickness on the drilling side ranging from 1 to 2mm. A sample was placed in a container of saline solution so that its lower half is submerged into the solution and the upper half exposed to the room air, which averaged $24.9^{\circ}C$. The temperature of the saline solution was maintained at $36.5^{\circ}C$ using an electric heater (J. O Tech Co., Korea). This experimental condition was similar to that of a patient s opened mouth. The study revealed that a 2mm twist drill required greatest attention. As a guide drill, a twist drill is required to bore through a 'virgin bone,' rather than merely enlarging an already drilled hole as is the case with other drills. This typically generates greater amount of heat. Furthermore, one tends to apply a greater pressure to overcome drilling difficulty, thus producing even greater amount heat. 150 experiments were conducted for 2mm twist drill. For 140 cases, drill pressure of 750g was sufficient, and 10 cases required additional 500 or 100g of drilling pressure. In case of the former. 3 of the 140 cases produced the temperature greater than $47^{\circ}C$, the threshold temperature of degeneration of bone tissue (1983. Eriksson et al.) which is also the reference temperature in this study. In each of the 10 cases requiring extra pressure, the temperature exceeded the reference temperature. More significantly, a surge of heat was observed in each of these cases This observations led to addtional 20 drilling experiments on dense bones. For 10 of these cases, the pressure of 1,250g was applied. For the other 10, 1.750g were applied. In each of these cases, it was also observed that the temperature rose abruptly far above the thresh old temperature of $47^{\circ}C$, sometimes even to 70 or $80^{\circ}C$. It was also observed that the increased drilling pressure influenced the shortening of drilling time more than the rise of drilling temperature. This suggests the desirability of clinically reconsidering application of extra pressures to prevent possible injury to bone tissues. An analysis of these two extra pressure groups of 1,250g and 1,750g revealed that the t-statistics for reduced amount of drilling time due to extra pressure and increased peak temperature due to the same were 10.80 and 2.08 respectively suggesting that drilling time was more influenced than temperature. All the subsequent drillings after the drilling with a 2mm twist drill did not produce excessive heat, i.e. the heat generation is at the same or below the body temperature level. Some of screw tap, pilot, and countersink showed negative correlation coefficients between the generated heat and the drilling time. indicating the more the drilling time, the lower the temperature. The study also revealed that the drilling time was increased as a function of frequency of the use of the drill. Under the drilling pressure of 750g, it was revealed that the drilling time for an old twist drill that has already drilled 40 times was 4.5 times longer than a new drill The measurement was taken for the first 10 drillings of a new drill and 10 drillings of an old drill that has already been used for 40 drillings. 'Test Statistics' of small samples t-test was 3.49, confirming that the used twist drills require longer drilling time than new ones. On the other hand, it was revealed that there was no significant difference in drilling temperature between the new drill and the old twist drill. Finally, the following conclusions were reached from this study : 1 Used drilling bur causes almost no change in drilling temperature but increase in drilling time through 50 drillings under the manufacturer-recommended cooling conditions and the drilling pressure of 750g. 2. The heat that is generated through drilling mattered only in the case of 2mm twist drills, the first drill to be used in bone drilling process for all the other drills there is no significant problem. 3. If the drilling pressure is increased when a 2mm twist drill reaches a dense bone, the temperature rises abruptly even under the manufacturer-recommended cooling conditions. 4. Drilling heat was the highest at the final moment of the drilling process.

• Journal of Radiation Protection and Research
• /
• v.31 no.4
• /
• pp.203-210
• /
• 2006

Purpose : To estimate the dose to the embryo/fetus of a pregnant patient with brain tumors, and to design an shielding device to keep the embryo/fetus dose under acceptable levels Materials and Methods : A shielding wall with the dimension of 1.55 m height, 0.9 m width, and 30 m thickness is fabricated with 4 trolleys under the wall. It is placed between a Patient and the treatment head of a linear accelerator to attenuate the leakage radiation effectively from the treatment head, and is placed 1 cm below the lower margin of the treatment field in order to minimize the dose to a patient from the treatment head. An anti-patient scattering neck supporters with 2 cm thick Cerrobend metal is designed to minimize the scattered radiation from the treatment fields, and it is divided into 2 section. They are installed around the patient neck by attach from right and left sides. A shielding bridge for anti-room scattered radiation is utilized to place 2 sheets of 3 mm lead plates above the abdomen to setup three detectors under the lead sheets. Humanoid phantom is irradiated with the same treatment parameters, and with and without shielding devices using TLD, and ionization chambers with and without a build-up cap. Results : The dose to the embryo/fetus without shielding was 3.20, 3.21, 1.44, 0.90 cGy at off-field distances of 30, 40, 50, and 60 cm. With shielding, the dose to embryo/fetus was reduced to 0.88, 0.60, 0.35, 0.25 cGy, and the ratio of the shielding effect varied from 70% to 80%. TLD results were 1.8, 1.2, 0.8, 1.2, and 0.8 cGy. The dose measured by the survey meter was 10.9 mR/h at the patient's surface of abdomen. The dose to the embryo/fetus was estimated to be about 1 cGy during the entire treatment. Conclusion : According to the AAPM Report No 50 regarding the dose limit of the embryo/fetus during the pregnancy, the dose to the embryo/fetus with little risk is less than 5 cGy. Our measurements satisfy the recommended values. Our shielding technique was proven to be acceptable.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.3
• /
• pp.259-267
• /
• 2004

Purpose: NEMA NU2-2001 was proposed as a new standard for performance evaluation of whole body PET scanners. in this study, system performance of Siemens CTI ECAT EXACT 47 PET scanner including spatial resolution, sensitivity, scatter fraction, and count rate performance in 2D and 3D mode was evaluated using this new standard method. Methods: ECAT EXACT 47 is a BGO crystal based PET scanner and covers an axial field of view (FOV) of 16.2 cm. Retractable septa allow 2D and 3D data acquisition. All the PET data were acquired according to the NEMA NU2-2001 protocols (coincidence window: 12 ns, energy window: $250{\sim}650$ keV). For the spatial resolution measurement, F-18 point source was placed at the center of the axial FOV((a) x=0, and y=1, (b)x=0, and y=10, (c)x=70, and y=0cm) and a position one fourth of the axial FOV from the center ((a) x=0, and y=1, (b)x=0, and y=10, (c)x=10, and y=0cm). In this case, x and y are transaxial horizontal and vertical, and z is the scanner's axial direction. Images were reconstructed using FBP with ramp filter without any post processing. To measure the system sensitivity, NEMA sensitivity phantom filled with F-18 solution and surrounded by $1{\sim}5$ aluminum sleeves were scanned at the center of transaxial FOV and 10 cm offset from the center. Attenuation free values of sensitivity wire estimated by extrapolating data to the zero wall thickness. NEMA scatter phantom with length of 70 cm was filled with F-18 or C-11solution (2D: 2,900 MBq, 3D: 407 MBq), and coincidence count rates wire measured for 7 half-lives to obtain noise equivalent count rate (MECR) and scatter fraction. We confirmed that dead time loss of the last flame were below 1%. Scatter fraction was estimated by averaging the true to background (staffer+random) ratios of last 3 frames in which the fractions of random rate art negligibly small. Results: Axial and transverse resolutions at 1cm offset from the center were 0.62 and 0.66 cm (FBP in 2D and 3D), and 0.67 and 0.69 cm (FBP in 2D and 3D). Axial, transverse radial, and transverse tangential resolutions at 10cm offset from the center were 0.72 and 0.68 cm (FBP in 2D and 3D), 0.63 and 0.66 cm (FBP in 2D and 3D), and 0.72 and 0.66 cm (FBP in 2D and 3D). Sensitivity values were 708.6 (2D), 2931.3 (3D) counts/sec/MBq at the center and 728.7 (2D, 3398.2 (3D) counts/sec/MBq at 10 cm offset from the center. Scatter fractions were 0.19 (2D) and 0.49 (3D). Peak true count rate and NECR were 64.0 kcps at 40.1 kBq/mL and 49.6 kcps at 40.1 kBq/mL in 2D and 53.7 kcps at 4.76 kBq/mL and 26.4 kcps at 4.47 kBq/mL in 3D. Conclusion: Information about the performance of CTI ECAT EXACT 47 PET scanner reported in this study will be useful for the quantitative analysis of data and determination of optimal image acquisition protocols using this widely used scanner for clinical and research purposes.

• Clinical and Experimental Reproductive Medicine
• /
• v.36 no.2
• /
• pp.111-119
• /
• 2009

Objective: The aim of this study was to compare the clinical efficacy of clomiphene citrate (CC) and letrozole combined with gonadotropins for controlled ovarian stimulation (COS) in patients with CC-induced thin endometrium Methods: Fifty-one intrauterine insemination cycles performed in patients who previously had a thin endometrium (<8 mm) to ovulation induction using CC were included in this study. A CC 100 mg/day (CC+gonadotropin group, n=26) or letrozole 2.5 or 5 mg/day (letrozole+gonadotropin group, n=25) was administered on day 3~7 of the menstrual cycle, combined with gonadotropins at dose 75~150 IU every other day starting on day 5~7. We compared total dose of gonadotropin used, endometrial thickness, endometrial pattern, number of follicles ${\geq}14\;mm$ on hCG day, pregnancy rate and multiple pregnancy rate between the two groups, which were statistically analyzed using Mann-Whitney U test or Fisher's exact test, where appropriate. Results: There were no significant differences in clinical characteristics such as age, duration of infertility, number of previous IUI cycles, basal serum hormone levels and cause of infertility between the two groups. In both groups, the endometrium was significantly thicker than that of previous ovulation induction cycles using CC. No significant differences were found in the total dose of gonadotropin used, day of hCG administration, the rate of triple endometrium and pregnancy rate. The number of follicles ${\geq}14\;mm$ was significantly lower ($3.7{\pm}1.7$ vs. $2.8{\pm}1.7$, p=0.03) and the endometrium on hCG day was significantly thicker ($7.7{\pm}1.5$ vs. $9.1{\pm}1.7$, p=0.001) in letrozole+gonadotropin group compared to CC+gonadotropin group. Conclusion: The clomiphene citrate and letrozole combined with gonadotropins appear to avoid the undesirable effects on the endometrium frequently seen with CC for ovulation induction. However, in terms of adequate endometrial development or optimal follicular growth, letrozole may be more beneficial than CC for gonadotropin-combined COS in patients with CC-induced thin endometrium. Further prospective randomized controlled studies in a larger scale will be necessary to confirm our findings.

• Food Science of Animal Resources
• /
• v.27 no.2
• /
• pp.235-243
• /
• 2007

This study was conducted to evaluate the effects of feeding rye silage on growth performance, blood and carcass characteristics in finishing pigs. The total of eighteen($Landrace{\times}Yorkshire{\times}Duroc$) pigs($74.22{\pm}0.71kg$) were used for 49-day assay. Dietary treatments included 1) CON(basal diet), 2) S1(1.66% rye silage) and 3) S2(3.32% rye silage). In growth performance, from 4 to 7 weeks, average daily feed intake(ADFI) in pigs fed CON diet was higher than pigs fed S1 and S2 diets. Through the entire experimental period($0{\sim}7$ weeks), a ADFI in CON and S2 treatments was higher than S1 treatment (p<0.05). Serum cortisol concentration of pigs fed rye silage decreased significantly compared to pigs fed basal diet (p<0.05). The Hunter's $L^*$(lightness) value of loin in the pigs fed S2 diet was higher than that of loin in the pigs fed CON diet(p<0.05). The $b^*$(yellowness) value of loin in the pigs fed S1 and S2 diets were higher than CON treatment(p<0.05). Backfat thickness in CON treatment increased significantly compared to S1 and S2 treatments(p<0.05). Among fatty acid contents of lean meat, the contents of palmitic and stearic acids were significantly higher in CON than others(p<0.05), where as eicosenoic and linolenic acids were the highest in S2 treatment among treatments(p<0.05). Total SFA(saturated fatty acid) was the highest in CON(p<0.05) and S1 and S2 treatments were higher USFA/SFA(unsaturated fatty acid/saturated fatty acid) ratio than CON treatment. In fats, linolenic acid was higher in S2 treatment than those of S1 and CON treatments(p<0.05). Digestibility of dry matter in pigs fed S1 and S2 diets was greater than that of pigs fed CON diet(p<0.05) and S1 treatment was higher than others on digestibility of nitrogen(p<0.05). VFA(volatile fatty acid) emission from focal, measured after 1 day, increased significantly in pigs fed S1 and S2 diets(p<0.05). In conclusions, our results showed that feeding rye silage might be beneficial in decrease of cortisol concentration, hunter's $L^*$(lightness) value and $b^*$(yellowness), fatty acid contents, and nutrient digestibility. However, there should be more study on the relationship between feeding rye silagr and finishing pigs.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.6
• /
• pp.737-747
• /
• 1999

To estimate biomass and distribution of the Antarctic krill (Euphausia superba), hydroacoustic survey was conducted on board of R/V Yuzhmorgeologiya, which was chartered by Korea Antarctic Research Program (KARP) group from 18 to 21 December 1998, in the northern part of the South Shetland Islands, Antarctic Ocean, The scientific echo sounder (towing body type) used was EK- 500 (SIMRAD, Norway) with echo integrator (BI-500) at 38 kHz frequency and recorded mean backscattering cross-section coefficient (SA) per 1 $mile^2$ of sea surface. Also, Bongo net sampling was carried out to determine the size of krill and CTD (Conductivity, Temperature and Depth) casting to understand physical structure. Water column was divided into 5 layers (22$\~$65 m, 65$\~$115 m, l15$\~$65 m, 165$\~$215 m and 215$\~$315 m) to know vertical distribution of krill biomass. The standard length of krill collected was between 30 mm and 51 mm, and adult krill had single mode (41 mm). Maximum horizontal length of krill patch was about 35 nautical mile and vertical thickness was about 275 m. High density of krill was appeared in frontal area between Circumpolar Deep Water (>$1^{\circ}C$) and very low temperature water mass (< $-0.5^{\circ}C$) that originate from Weddell Sea. According to the results calculated using target strength equation, krill density was totally higher in continental slope and open water areas than in coastal area. In the study area, krill seems to distribute in depth; density was low at first layer ($\={\rho}=17.0\;g/m^2$) and higher at fourth layer ($\={\rho}=40.19\;g/m^2$). The estimated krill biomass at total survey area and water column was about 2.77 million metric ion ($\={\rho}=151.0\;g/m^2$) and coefficient of valiance ( CV, $\%$) was 19.92. The proportions and biomass of krill biomass at each layer were as follows; layer 1 ($11.3\%$, 0.31 million metric ton, CV=16.24), layer 2 ($13.3\%$, 0.37 million metric ton, CV=34.91), layer 3 ($23.7\%$, 0.66 million metric ton, CV=41.5), layer 4 ($26.6\%$, 0.74 million metric ton, CV=27.84) and layer 5 ($25\%$, 0.69 million metric ton, CV= 26.83).

• Journal of the Korean Geographical Society
• /
• v.31 no.3
• /
• pp.447-468
• /
• 1996

The peat layer was deposited on the abandoned channel of incised meander of River Banbyuncheon with 7 meter thickness on Youngyang basin. The late Quaternary environmental change on the study area was discussed based on pollen anaalysis and radiocarbon-dating from this peat. The swamp which was caused to sediment the peat, was produced by which the fan debris from the adjacent slope damed the waterflow on the abandoned channel. The peat layer contains continuous vegetational history from 60,000y.B.P. to Recent. The peat deposit was divided into two layers by the organic thin sand horizon, which was sedimented at one time and made unconformity between the lower decomposed compact peat layers and the upper fresh fiberous peat layer. As the result of the pollen analysis, both peat layers from the two boring sites, Profile YY1 and Profile YY2 were divided into five Pollenzones(Pollenzone I, II, III, IV and V) and 12 Subzones which were mainly corresponded by the AP (Arboreal Pollen)-Dominance. The two profiles have some differences on the sedimentary facies and on the pollen composition as well. Therefore these were in common with the Pollenone III, however the Pollenzone I and II existed only on the Profile YY1 and the Pollenzone IV and V existed only on the Profile YY2. The lower layer containing the Pollenzone I, II and III revealed vegetational records of Pleistocene, which was characterized as tundra-like landscape and thin forested landscapes. It represented the NAP (Non-Arboreal Pollen)-period with a plenty of Artemisia sp., Sanguisorba sp., Umbelliferae, Gramineae and Cyperaceae. However a relatively high proportion of the boreal trees with Picea sp., Pinus sp. and Betula sp. as AP was observed in the lower layer. The upper layer contained the Pollenzone IVb and V and vegetational history in Holocene which was characterized by thick forested landscape with rich tree pollen. It represented AP-period with plenty of Pinus sp. and Quercus sp. as temperate trees. The temperature fluctuation supposed from the vegetational records is as follows; the Pollenzone I(Betula-Dominance, about 57,000y.B.P.) represents relatively cold period. The Pollenzone II(EMW-Domi-nance, 57,000-43,000y.B.P.)represents relatively warm period. This period is supposed to be Interstadial, the transi-tional stage from Alt- to Mittel Wurm. The Pollenzone III(Butula-, Pinus- and Picea-Dominace in turns, 43,000-15,000y.B.P.) reproesents cold period which had been built from Mittel-to Jung Wurm. Especially the Subzone IIId represents the coldest period throughout the Pollenzone III. It is corresponds to Wurm Glacial Maximu. It is supposed that the mean temperature in July of this period was coller about 10${^\circ}$C than present. The Pollenzone IV and V represent the vegetational history of Holocene. Tilia, Quercus and Pinus were dominant in turns during this period. Subzone IVb and Pollenzone I and II at east coastal plain of Korean penninsula reported by JO(1979).

• Korean Journal of Poultry Science
• /
• v.38 no.1
• /
• pp.59-69
• /
• 2011

This study was conducted to investigate the effects of dietary supplementation of CS682, a fermentation product of Actinomycetae(Nocardia sp. CS682), and its commercial product DSC682$^{(R)}$ on the performance, blood parameters, intestinal microflora, and immune response in laying hens. Hy-Line Brown$^{(R)}$ laying hens were housed in two bird cages. Feeding trial lasted 5 wk under 16.5 h:7.5 h(L:D) lighting regimen. In Exp.1, a total of 480 birds of 86 wk old were assigned to four dietary treatments: Control, Antibiotics (6 ppm avilamycin), CS682-0.1 (CS682 0.1%) and CS682-1.0 (CS682 1.0% supplementation). Each treatment was replicated five times with 24 birds (or 12 cages) per replication. In Exp. 2, a total of 1,000 birds of 26 wk old were assigned to five dietary treatments: Control, Antibiotics (6 ppm avilamycin), DCS682-0.05 (DCS682 0.05%), DCS682-0.1 (DCS682 0.1%), DCS682-0.2 (DCS682 0.2% supplementation). Each treatment was replicated five times with 40 birds (or 20 cages) per replication. In Exp. 1, there were no significant differences among treatments in egg production, egg weight, broken & soft egg production, feed intake, and feed conversion ratio. Also, there were no significant differences among treatments in eggshell thickness, eggshell color and Haugh unit. However, eggshell strength was significantly (p<0.05) greater in CS682 and Antibiotics treatments than Control, and egg yolk color was significantly (p<0.05) higher in CS682-1.0 than Control. In Exp. 2, feed intake was significantly (p<0.05) lower in DSC682-0.05 than Control. Lightness(L) of Hunter Lab color of eggshell of DCS and Antibiotics treatments was significantly (p<0.05) lower than Control. Egg yolk color of DCS 0.1 and 0.2 treatments was significantly (p<0.05) higher than Control. Haugh unit increased significantly (p<0.05) in Antibiotics and DCS682-0.1 treatments. The immunoglobulin levels of plasma (IgG and IgA) and eggyolk (IgY) were not significantly affected by treatments. Antibiotics and CS682 or DCS682 treatments significantly (p<0.05 or 0.01) influenced some of the erythrocytes and leukocytes parameters in blood. In Exp.1, mean corpuscular volume (MCV) decreased by CS682 treatments and mean corpuscular hemoglobin (MCH) was highest in Antibiotics treatments. In Exp.2, the level of monocyte (MO) decreased in DCS682-0.10 and 0.20 treatments. The cfu of C. perfringens and S. typhimurium in small intestinal content were highest in Control and lowest in Antibiotics in both experiments. In Exp. 2, DSC682-0.05 and -0.1 treatments were highest and Antibiotic treatment was lowest in Lactobacilli spp. The results of the present layer experiments indicated that supplementation of 0.1~0.2% CS682 or DCS682 may increase eggshell strength, color of eggshell and eggyolk, Haugh unit, and control harmful intestinal microbes.

• Korean Journal of Poultry Science
• /
• v.35 no.2
• /
• pp.143-151
• /
• 2008

This study was conducted to identify the correlation of bacterial phytase ($Transphos^{(R)}$) to the calcium level in feed. Of all 21-week-old 720 HyLine brown laying hens, 2 birds of similar weight were placed on each individual cage. The experiment was conducted by $3{\times}2{\times}3$ factorial design with including 3 different levels of phytase (0, 300, and 1,000 DPU/kg), 2 different levels of calcium (3.5% and 4.0%), and 3 different levels of no NPP addition 0% (0.095 NPP), 0.5% (0.185% NPP), and 1.0% (0.275% NPP). The feeding trial maintained the ME level of 2,800 kcal/kg and 16% for crude protein. The diet was fed ad libitum and 17 hours of lighting was provided throughout the experimental period. Egg production seemed to increase, in the 300 DPU of bacterial phytase added group and the cracked egg tended to reduce in Transphos added group. The egg productivity between treatment groups did not show significant difference by dietary calcium level, whereas non NPP added group (0.095% NPP) was found to be low compared to NPP added groups (P<0.05). The highest mean egg weight and the highest daily egg mass were detected in 300 DPU phytase added group. Although the mean egg weight was significantly higher in treatment groups fed with 3.5% calcium containing feeds (P<0.05), daily egg mass was no among treatment groups. The mean egg weight and daily egg mass were the lowest in non NPP added group (0.095% NPP) compared to other treatment groups (P<0.05). The feed intake showed similar pattern regardless of the bacterial phytase and calcium levels in the diet. However, the treatment groups fed diets containing NPP level of 0.275% and 0.165% showed significantly higher feed intake than the group fed with 0.095% NPP (P<0.05). Although the feed conversion was not affected by calcium and NPP levels in the diet, the most improved result was obtained from 300 DPU phytase added group (P<0.05). The eggshell breaking strength and thickness increased as dietary calcium level increase the level of calcium increases in diet. The treatment groups fed diet containing 0.275% and 0.165% NPP revealed to show improvement in eggshell breaking strength and yolk color index compared to the NPP non added (0.095% NPP) treatment group. The result of the present study suggests that the appropriate level of microbial phytase is 300 DPU and at this level, tricalciumphosphate supplementation in feed can be reduced to 40% of NRC recommendation. Higher calcium level in feed fail to show synergistic effect by adding microbial phytase.

• 한국해양학회지
• /
• v.30 no.4
• /
• pp.279-287
• /
• 1995

The vertical profiles of natural ²¹⁰Pb, ²¹⁰Po and ²³⁴Th activities were measured for the upper 100 m of water column at three stations in the middle region of the Korean East Sea during May 1992. And the distribution of these radionuclides was discussed associated with the formation of warm eddy or water mass. The main thermocline was maintained between the depth of 50 and 100 m at the southern station (Sta. A1), and between the depth of 10 to 50 m at the coastal station of Sockcho (Sta. B10). Contrastingly, a main thermocline at Sta. A10, which locates near the center of warm eddy, was observed below 230 m depth. Between 50 and 220 m depth of Sta. A10 is there a relatively homogeneous water mass of 10.1${\pm}$0.5$^{\circ}C$, which is significantly higher in temperature and lower in nutrient than the other two stations. It seems to be due to sinking of the warm surface water in which nutrients were completely consumed. Both ²¹⁰Pb and ²¹⁰Po show the highest concentration at Sta. A1 and the lowest at Sta. B10 among the three stations. Also, the ²¹⁰Pb activity is generally higher in the upper layer than in the lower layer, while ²¹⁰Po activity represents the reversed pattern at all three stations. At Sta. A1 and Sta. B10, the activities of ²¹⁰Po relative to its parent ²¹⁰Pb were deficient in the water column above the main thermocline, but were excess below the thermocline. However, the station near the center of warm eddy(Sta. A10), shows no excess of ²¹⁰Po in the depths below 50 m, although its defficiency is found in the upper layer like the other stations. At Sta. A1 and b10. ²³⁴Th activities are slightly lower in the surface mixed layer than in the deeper region However, at Sta. A10, ²³⁴Th activity in the upper 30 m is higher than below 50 m or in the same depth of the other stations, probably because of the high concentration of particulate matter. The residence time of ²¹⁰Po in the surface mixed layer at Sta. A10 is 0.4 year, much shorter than at the other two stations(about one year). Above 100 m depth, the residence times of ²³⁴Th range from 18 to 30 other two stations(about on year). Above 100 m depth, the residence times of ²³⁴Th range from 18 to 30 days at all stations, without significant regional variation. The percentages of recycled ²¹⁰Po within the thermocline are 39% and 92% at Sta. A1 and Sta. B10, respectively. Much higher value at Sta. B10 may be due to a thin thickness of the mixed layer as well as the slower recycling rate of ²¹⁰Po in the main thermocline.