• 한국세라믹학회지
• /
• 제47권4호
• /
• pp.319-324
• /
• 2010

Screen printable $MoSi_2$ paste and its ceramic sheet heater were investigated. $MoSi_2$ powder without $Mo_5Si_3$ second phase, which causes so-called pest phenomena, was synthesized by SHS technique. Over glaze was also developed for preventing pest phenomenon. The maximum temperature of $MoSi_2$ ceramic heater was over $500^{\circ}C$. After several heat up and cooling cycle, the $MoSi_2$ heater reveals pest phenomenon. Conductive $MoSi_2$ paste could be used in electronic ceramics, i.e., MLCC, LTCC, HTCC, and etc.

• 전자공학회논문지A
• /
• 제32A권3호
• /
• pp.134-142
• /
• 1995

We discovered that each distinct shape of the roof-shaped peaks of (111) facets, which are generated on (110) cross-section of the directly bonded (100) silicon wafer pairs after KOH etching, can be mapped to one of three conditions of the interfacial oxide existing at the bonding interface as follows. That is, thick solid line can be mapped to stabilization, thin solid line to disintegration, and thin broken line to spheroidization. also we confirmed that most of the interfacial oxides of a well-aligned wafer pairs were disintegrated and spheroidized through high-temperature annealing process above 900$^{\circ}$C while the oxide was stabilized persistently when two wafers are bonded rotationally around their common axis perpendicular to the wafer planes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1642-1644
• /
• 1996

Passivation must prevent ionic charge movement on the surface of the junction, thereby minimizing the junction leakage and maximizing the breakdown voltage of the devices. Borosilicate glasses are widely used as surface passivants for such silicon power devices as thyristors, transistor, and diodes. Since these 91asses are electrically stable at high temperatures and in high electric fields, they can readily be applied as a thick film, and they are resistant to humidity and have low ionic mobility. A deposition technique of glass film on the silicon surface by electrophoresis in which acetone is used as a suspension medium has been investigated. The purpose of this paper is to describe electrophoretic deposition method for glass passivation and characteristics of glass films which were compared using DTA, SEM, XRD, as a function of firing temperature.

• 한국전기전자재료학회논문지
• /
• 제26권5호
• /
• pp.347-350
• /
• 2013

By inserting a very thin metal layer of Ag between two outer oxide layers of amorphous silicon indium zinc oxide (SIZO), we fabricated a highly transparent SIZO/Ag/SIZO multilayer on a glass substrate. In order to find the optimized thickness of Ag layers, we investigated the variation of optical properties depending on Ag thickness. It was found that the transition of Ag layer from island formation to a continuous film occurred at a critical thickness. Continuity of the Ag film is very important for optical properties in SIZO/Ag/SIZO multilayer. With about 15 nm thick Ag layer, the multilayer showed a high optical transmittance of 80% at 550 nm and low emissivity in IR.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.381-384
• /
• 2003

In this paper, cobalt (Co)-electrode FBAR devices fabricated on seven-layered Bragg Reflectors are presented along with their resonance characteristics. ZnO films are used as the resonating material in FBAR devices where the Co electrode is 3000$\AA$ thick. All processes are preformed in an RF magnetron sputtering system. As a result of characterization, the resonance characteristics are observed to depend strongly on the quality of ZnO film and Bragg Reflectors. In addition, the FBAR devices with W/SiO$_2$ reflectors show good resonance characteristics in term of return loss and quality-factor (Q-factor).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.188.2-188.2
• /
• 2014

Chemical vapor deposition (CVD) method is usually used to grow high-quality large area graphene. In the CVD process, copper is an especially important catalytic-substrate due to the fact that graphene films grown on Cu foils are predominantly one monolayer thick. In this study, we has grown graphene on several types of copper substrates: Cu foils and copper single crystal surfaces such as Cu(100) and Cu(111) are chosen. To investigate the differences between graphene grown on foils and single crystals, we use Raman spectroscopy, X-ray diffraction and atomic force microscopy. Details of the experimental results will be presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.548-551
• /
• 2002

The crystallization of amorphous silicon (a-Si) was achieved using a field aided lateral crystallization (FALC) process at 350 $^{\circ}C$. Under the influence of an electric field, Cu is found to drastically enhance the lateral crystallization velocity of a-Si. When an electric field was applied to the selectively Cu-deposited a-Si film during the heat treatment at temperature as low as 350 $^{\circ}C$, dendrite-shaped crystallization of a-Si progressed toward Cu-free region and the crystallization from negative electrode side toward positive electrode side was accelerated. We identified that 1000${\AA}$ thick a-Si film was completely crystallized by Cu-FALC process at 350 $^{\circ}C$ by TEM analysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.19-22
• /
• 1996

GaN films were prepared on Al$_2$O$_3$(1120) substrates by hydride vapor phase epitaxy (HVPE) with HCl-NH$_3$-N$_2$ gas system. The growth rate was increased with increasing the substrate temperature below 1050$^{\circ}C$ and decreased over the temperature, increased with growth time. The X-ray diffraction patterns showed only (0002) GaN peak. The UV-Visible Spectrophotometer showed a good optical absorption and fundamental absorption occurred at 3700${\AA}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.59-60
• /
• 2005

The characteristics of GaN epitaxial layers grown on silicon (111) substrates by metalorganic vapor phase epitaxy have been investigated. The only control of AIN thickness was found to decrease the stress sufficiently for avoiding crack formation in an overgrown thick ($2.6{\mu}m$) CaN layer. X-ray diffraction measurementsare used to determine the effect of AIN thickness on the strain in the subsequent GaN layers. The 437arcsec linewidth on the (002) x-ray rocking curve also attest the high crystalline quality of GaN on Si (111).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.72-75
• /
• 1996

A hydride vapor phase epitaxy (HVPE) method is performed to prepare the GaN thin films on c-plane sapphire substrate. The full-width at half maximum of double crystal X-ray rocking curves from 20$\mu\textrm{m}$-thick GaN was 576 arcsecond. The photoluminescence spectrum measured 10 K shows the hallow bound exciton (I$_2$) line and weak donor-acceptor peak, however, there was not observed deep donor-acceptor pair recombination indicate the GaN crystals prepared in this study are of high purity and high crystalline quality. The GaN layer is n-type conducting with electron mobility of 72 $\textrm{cm}^2$/V$.$sec and with carrier concentration of 6 x 10$\^$18/cm/sup-3/.