Browse > Article
http://dx.doi.org/10.4191/KCERS.2010.47.4.319

Preparation of Screen Printable Conductive MoSi2 Thick Films for Ceramic Sheet Heater  

Kim, Bae-Yeon (Department of Materials Science and Engineering, University of Incheon)
Han, Dong-Bin (Winnertechnology)
Jeong, Cheol-Weon (Winnertechnology)
Publication Information
Journal of the Korean Ceramic Society / v.47, no.4, 2010 , pp. 319-324 More about this Journal
Abstract
Screen printable $MoSi_2$ paste and its ceramic sheet heater were investigated. $MoSi_2$ powder without $Mo_5Si_3$ second phase, which causes so-called pest phenomena, was synthesized by SHS technique. Over glaze was also developed for preventing pest phenomenon. The maximum temperature of $MoSi_2$ ceramic heater was over $500^{\circ}C$. After several heat up and cooling cycle, the $MoSi_2$ heater reveals pest phenomenon. Conductive $MoSi_2$ paste could be used in electronic ceramics, i.e., MLCC, LTCC, HTCC, and etc.
Keywords
$MoSi_2$; Sheet heater; Ceramic; Paste; SHS;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
Times Cited By SCOPUS : 2
연도 인용수 순위
1 P. Feng, X. Wang, Y. He, and Y. Qiang, “Effect of High-temperature Preoxidation Treatment on the Low-temperature Oxidation Behavior of a MoSi2 based Composite at 500${\circ}$C,” J. Alloys and Compounds, 473 185-89 (2009).   DOI
2 C.L. Yeh and W.H. Chen, “Combustion Synthesis of $MoSi_{2}-Mo_{5}Si_{3}$ Composite,” J. Alloys and Compounds, 438 165-70 (2007).   DOI
3 S.-W. Jo, G.-W. Lee, J.-T. Moon, and Y.-S. Kim, “On the Formation of $MoSi_2$ by Self-propagating High-temperature Synthesis,” Acta Mater., 44 [11] 4317-26 (1996).   DOI
4 I.-H. Song, J.-Y Yun, and H.-D. Kim, “Fabrication of Porous $MoSi_2$ Material for Heating Element Through Self-propagating High Temperature Synthesis Process (in Korean),” J. Kor. Ceram. Soc., 41 [1] 62-8 (2004).   DOI
5 I.-H. Song, D.-W. Kim, J.-Y Yun, and H.-D. Kim, “The Effects of Variation in Si Content on the Properties of Porous $MoSi_2$ Fabricated by Self-propagating High Temperature Synthesis Process(in Korean),” J. Kor. Ceram. Soc., 41 [7] 534-40 (2004).   과학기술학회마을   DOI
6 Y.-L. Jeng and E.J. Lavernia, “Review : Processing of Molybdenum Disilicide,” J. Mat. Sci., 29 2557-71 (1994).   DOI
7 J.H. Westbrook and D.L. Wood, ““PEST” Degradation in Beryllides, Silicides, Aluminides, and Related Compounds,” J. Nuclear Materials, 12 [2] 208-15 (1964).   DOI
8 Y.Q. Liu, G. Shao, and P. Tsakiropoulos, “On the Oxidation Behaviour of $MoSi_2$,” Intermetallics, 9 125-36 (2001).   DOI
9 K. Hasson, M. Halvarsson, J. E. Tang, R. Pompe, M. Sundberg, and J.-E. Svensson, “Oxidation Behaviour of a $MoSi_2$-based Composite in Different Atmospheres in the Low Temperature Range (400-550${\circ}$C),” J. Euro. Ceram. Soc., 24 3559-73 (2004).   DOI
10 L. Shaw, R. Abbaschian, “Chemical State of the Molybdenum Disilicide($MoSi_2$) Surface,” J. Mat. Sci., 30 5272-80 (1995).   DOI
11 K. Kurokawa, H. Houzumi, I. Saeki, and H. Takahashi, “Low Temperature Oxidation of Fully Dense and Porous $MoSi_2$,” Mat. Sci. Eng., A261 292-99 (1999).
12 P.J. Meschter, “Low-temperature Oxidation of Molybdenum Disilicide,” Metallung. Trans., 23A 1763-72 (1992).
13 F. Zhang, L. Zhang, A. Shan, and J. Wu, “Oxidation of Stoichiometric Poly- and Single Crystalline $MoSi_2$ at 773K,” Intermetallics, 14 406-11 (2006).   DOI
14 D.A. Bertiss, R.R. Cerchiara, E.A. Gulbransen, F.S. Petit, and G.H. Meier, “Oxidation of $MoSi_2$ and Comparison with other Silicide Materials,” Mater. Sci. Eng., A155 165-81 (1992).