• Structural Engineering and Mechanics
• /
• 제71권6호
• /
• pp.669-682
• /
• 2019

We in this article study nonlinear thermal buckling of bi-directional functionally graded beams in the theoretical frameworks of nonlocal strain graded theory. To begin with, it is assumed that the effective material properties of beams vary continuously in both the thickness and width directions. Then, we utilize a higher-order shear deformation theory that includes a physical neutral surface to derive the size-dependent governing equations combining with the Hamilton's principle and the von $K{\acute{a}}rm{\acute{a}}n$ geometric nonlinearity. It should be pointed out that the established model, containing a nonlocal parameter and a strain gradient length scale parameter, can availably account for both the influence of nonlocal elastic stress field and the influence of strain gradient stress field. Subsequently, via using a easier group of initial asymptotic solutions, the corresponding analytical solution of thermal buckling of beams is obtained with the help of perturbation method. Finally, a parametric study is carried out in detail after validating the present analysis, especially for the effects of a nonlocal parameter, a strain gradient length scale parameter and the ratio of the two on the critical thermal buckling temperature of beams.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제25권2호
• /
• pp.54-65
• /
• 2021

In this study, a two-dimensional thermoelastic problem under hyperbolic heat conduction theory with an internal heat source is considered. The general solution for the temperature field, stress components and displacement field are obtained using the reduced differential transform method. The stress and displacement components are obtained using the thermal stress function in the reduced differential transform domain. All the solutions are obtained in the form of power series. The special case with a time-dependent laser heat source has been considered. The problem is considered for homogeneous material with finite rectangular cross-section heated with a non-Gaussian temporal profile. The effect of the heat source on all the characteristics of a material is discussed numerically and graphically for magnesium material taking a pulse duration of 0.2 ps. This study provides a powerful tool for finding the solution to the thermoelastic problem with less computational work as compared to other methods. The result obtained in the study may be useful for the investigation of thermal characteristics in engineering and industrial applications.

• 한국측량학회지
• /
• 제39권2호
• /
• pp.73-79
• /
• 2021

Recently there are growing interests on the energy conservation and emission reduction. In the fields of architecture and civil engineering, the energy monitoring of structures is required to response the energy issues. In perspective of thermal monitoring, thermal images gains popularity for their rich visual information. With the rapid development of the drone platform, aerial thermal images acquired using drone can be used to monitor not only a part of structure, but wider coverage. In addition, the stereo photogrammetric process is expected to generate 3D point cloud with thermal information. However thermal images show very poor in resolution with narrow field of view that limit the use of drone-based thermal photogrammety. In the study, we aimed to generate 3D thermal point cloud using visible and thermal images. The visible images show high spatial resolution being able to generate precise and dense point clouds. Then we extract thermal information from thermal images to assign them onto the point clouds by precisely establishing photogrammetric collinearity between the point clouds and thermal images. From the experiment, we successfully generate dense 3D thermal point cloud showing 3D thermal distribution over the building structure.

• 호남수학학술지
• /
• 제38권3호
• /
• pp.435-454
• /
• 2016

This paper investigates the effect of dual-phase-lags on a thermoviscoelastic orthotropic solid with a cylindrical cavity. The cylindrical cavity is subjected to a thermal shock varying heat and its material is taken to be of Kelvin-Voigt type. The phase-lag thermoelastic model, Lord and Shulman's model and the coupled thermoelasticity model are employed to study the thermomechanical coupling, thermal and mechanical relaxation (viscous) effects. Numerical solutions for temperature, displacement and thermal stresses are obtained by using the method of Laplace transforms. Numerical results are plotted to illustrate the effect phase-lags, viscoelasticity, and the variability thermal conductivity parameter on the studied fields. The variations of all field quantities in the context of dual-phase-lags and coupled thermoelasticity models follow similar trends while the Lord and Shulman's model may be different. The influence of viscosity parameter and variability of thermal conductivity is very pronounced on temperature and thermal stresses of the thermoviscoelastic solids.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권3호
• /
• pp.225-231
• /
• 2010

In this paper, we investigate the channel thermal noise in nanoscale MOSFETs. Simple analytical model of thermal noise factor in nanoscale MOSFETs is presented and it is verified with accurately measured noise data. The noise factor is expressed in terms of the channel conductance and the electric field in the gradual channel region. The proposed noise model can predict the channel thermal noise behavior in all operating bias regions from the long-channel to nanoscale MOSFETs. From the measurement results, we observed that the thermal noise model for the long-channel MOSFETs does not always underestimate the short-channel thermal noise.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.246-248
• /
• 1994

The Electrical properties of thin $SiO_2$ film by rapid thermal processing have been investigated and this film has been compared with thermal $SiO_2$ film by furnace. The RTO(rapid thermal oxide) film annealed in Ar ambient represent more superior properties than thermal $SiO_2$ film by furnace at breakdown field and leakage current. The RTO(rapid thermal oxide) film annealed in $NH_3$ ambient represent more inferior properties than thermal $SiO_2$ film by furnace at electrical properties, but the capacitance was improved 15-25% than the conventional oxide film.

• Advances in nano research
• /
• 제15권3호
• /
• pp.191-201
• /
• 2023

In order to develop better method to enhance and control the flow and heat transfer inside the radiator of electronic device, the synergistic effect of MHD nanofluids and porous medium on the flow and heat transfer in rectangular opened channel is simulated using Lattice Boltzmann method. Three nanofluids of CuO-water, Al₂O₃-water and Fe₃O₄-water are studied to analyze the influence of the type of nanofluid on the synergistic effect. The simulation results show that the porous medium can increase the flow velocity in fluid zone adjacent to the porous medium and enhance the heat transfer on the surface of the channel. Under no magnetic field, when the porosity of porous medium is 0.8, the Nusselt number is 4.46% higher than when the porosity is 0.9. Al₂O₃-water has the best heat transfer effect among the three nanofluids. At Ф=0.06, Ha=100, θ=90°, ε=0.9, Nu of Al₂O₃-water is 6.51% larger than that of CuO-water and 5.05% larger than that of Fe₃O₄-water. Magnetic field enhances seepage in porous medium and inhibits heat transfer in the bottom wall. When Ha=30 and 60, the inhibiting effect is the most significant as the magnetic field angle is 90°. And when Ha=100, the inhibiting effect is the most significant as the magnetic field angle is 120°.

• 환경영향평가
• /
• 제24권4호
• /
• pp.367-374
• /
• 2015

해수 표층 수온은 원자력발전소의 온배수 영향을 조사하기 위해서 위성원격탐사에 의해 관측되는 가장 중요한 정보들 중 하나이다. 하지만 Landsat 7 위성과 Landsat 8 위성의 열적외선 센서로부터 추출한 표층수온과 실측치를 비교한 연구는 부족하다. Landsat 8 위성은 표층수온을 추출하기 위해 열적외선 센서에 두 개의 분리된 밴드를 가지고 있지만, Landsat 7은 한 개의 밴드를 사용하고 있다. 그럼에도 불구하고 본 연구에서는 Landsat 7 ETM+센서가 Landsat 8 TIRS 보다 표층수온의 보정에 유용하다는 것을 제시하였다. 본 연구에서는 Landsat 114-36 지역의 15개 위성자료를 가지고 ENVI와 IDL을 이용한 표층수온 알고리즘을 처리하였다. 국립해양조사원으로부터 수집한 표층수온 실측자료와 위성에서 추출한 표층수온을 비교하였고, 위성관측 시계열 자료와 측정지점의 실측자료를 통해 정확도를 비교하였다.

• 한국항공우주학회지
• /
• 제49권8호
• /
• pp.617-626
• /
• 2021

비행체의 초음속 비행 중 고온 환경에서의 열 거동은 비행체의 열 구조 설계에 중요하다. 본 연구에서는 전역-국부 다중 디지털 이미지 상관기법을 사용하여 노치 구조물의 전 영역의 열변형 및 응력집중 현상에 대해 관찰/분석하였다. 다중 DIC 시스템은 2D DIC 시스템과 3D DIC 시스템으로 구성되었다. 가열 챔버를 이용하여 노치 시편을 가열하였으며 여러 온도에서 다중 DIC 시스템을 사용하여 구조물의 변형 이미지를 촬영하고 분석하였다. 다중 DIC 기법을 사용하여 노치 시편의 전 영역 변형률과 노치 부위의 응력집중 현상을 계측/분석하였으며 ABAQUS^TM 프로그램을 이용하여 노치 시편에 대해 유한요소해석을 진행하고 실험결과와 비교 분석하였다. 본 연구를 통해 다중 DIC 시스템의 열변형 계측과 응력 집중 현상의 연구 분석에서의 활용 가능성을 보여주었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제14권5호
• /
• pp.62-70
• /
• 2009

본 연구에서는 lab-scale의 열탈착 장치를 설계 및 제작하고 실제 유류오염 토양을 대상으로 다양한 운전조건에 따른 오염토양정화성능을 비교하였다. 대상 토양은 군부대로 사용되던 부지 내 유류저장소 부근 고농도 오염토로 선정하였고, 10 L 용적의 원통형 batch 형태의 직접 가열식 열탈착기를 사용하여 초기 TPH 농도 4476 ppm의 고농도 오염 토양시료를 다양한 운전조건에서 열탈착하여 처리효율 분석을 수행하였다. 열중량 분석을 통해 열탈착 실험에서 대상 오염물질을 제거하기 위한 토양 시료의 평균 가열온도는 $200-300^{\circ}C$가 적합한 것으로 확인하였다. Batch 형식의 운전을 통한 처리효율 분석 결과 토양 내 오염물질을 90% 이상 제거하기 위해서는 약 $200^{\circ}C$에서는 10분, 약 $300^{\circ}C$에서는 5분 이상의 처리 시간이 요구되었다. 함수율이 높고 덩어리진 토양일수록 처리효율, 특히 고분자 오염물질의 처리효율이 크게 감소함을 보였다. 따라서 풍건을 통하여 오염토양 내 수분을 저하시킨 후 분쇄 처리하여 열탈착기에 주입하는 것이 효과적이라 판단된다. 또한 처리 전 토양과 처리 후 토양의 물리화학적 특성 비교한 결과 고온에 의해 증발된 수분함량을 제외하고 나머지 특성들은 거의 변화가 없어 실제 복원현장에서 오염토양을 열탈착 공정을 이용하여 오염물질을 제거한 후 추가적인 후처리 과정 없이 처리토양을 원래 위치에 복원하는 것이 가능함을 확인하였다. 본 연구결과는 현장운전에서 오염물질의 제거 효율을 극대화하기위한 인자 결정 및 검증을 위한 기초자료로 활용될 수 있을 것으로 사료된다.