• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.177-179
• /
• 2012

This work presents an experimental investigation to study $NO_x$ emissions under stoichiometric air ratio and elevated pressure (2~10bar) in a High Press Combustor(HPC) equiped with double cone burner which was designed by Pusan Clean Coal Center(PC3). Exaust gas temperature and $NO_x$ emissions were measured at the end of the combustion chamber. The $OH^*$ radical concentration and $NO_x$ emission were decreased as a function of increasing ${\lambda}$ generally. On the other hand, $OH^*$ radical concentration and $NO_x$ emission increased with ${\lambda}$ pressure of the combustion chamber. $NO_x$ emissions which were governed by thermal $NO_x$, were highly increased under the elevated pressure, but slightly increased at sufficiently low fuel concentrations (${\lambda}>2.0$).

• 설비공학논문집
• /
• 제28권4호
• /
• pp.153-157
• /
• 2016

In case of metal insulation, which is produced by stacking stainless steel sheets and air layers in a multi-stack manner at a specific thickness, insulation performance will be evaluated based on thermal transmittance rather than the intrinsic physical properties of each material such as thermal conductivity. However, there is no standard for measuring thermal transmittance targeted for non-homogeneous insulation which is used in relatively high temperature conditions such as a power station. In this study, the thermal conductivity of homogeneous insulation acquired by the standardized guard hot plate method and the thermal conductivity of homogeneous insulation measured by the newly developed performance tester were compared to verify the confidence level of the tester. As a result, thermal conductivity acquired by the newly developed thermal transmittance tester was about 6% higher than the thermal conductivity measured by the existing guard hot plate method under the anticipated service temperature conditions.

• 공업화학
• /
• 제17권4호
• /
• pp.409-413
• /
• 2006

$150{\sim}200^{\circ}C$의 저온조건에 적용하기 위한 탈질공정으로서 저온 플라즈마 및 암모니아 SCR 공정을 복합시킨 탈질공정에 대한 실험적인 연구가 수행되었다. 실험결과 저온조건에서 일반적인 SCR 반응에 비해 매우 빠른 반응속도를 갖는 fast SCR 반응의 가능성을 확인할 수 있었으며, 효과적인 fast SCR 반응을 위해서는 SCR 반응기에 투입되는 $NO_{2}/NO_{x}$의 비가 0.3~0.5 범위에 있음을 알 수 있었다. 본 연구에서는 저온운전에 따른 암모늄염의 발생문제, 배기가스에 포함되어 있는 탄화수소가 공정에 미치는 영향, 유사한 공정과의 운전전력 비교 등 해당기술을 활용하기 위해 기본적으로 필요한 자료를 제공하고 있다.

• 대한환경공학회지
• /
• 제22권12호
• /
• pp.2247-2254
• /
• 2000

본 연구는 저온 플라즈마 탈질 기술의 전력소모량 절감과 처리율 향상을 모색하고자 저온 플라즈마 조건에서 NOx와 반응제의 반응 특성을 고찰하였다. 실험은 $20Nm^3/hr$의 실제 배가스와 wire-plate type 플라즈마 반응기를 이용하여 진행되었으며, 반응제로는 파라핀계와 올레핀계 탄화수소 및 $NH_3$를 사용하였다. 저온 플라즈마 조건에서 올레핀계 탄화수소는 파라핀계 탄화수소에 비하여 NO의 산화에 탁월한 효과를 보여 다량의 $NO_2$를 생성할 뿐만 아니라 미량의 CO도 생성하였다. 또한 NOx의 초기농도가 높아지면 NO의 산화율은 감소할 뿐만 아니라 올레핀계 탄화수소의 소모량도 두드러진 증가를 보였다. 한편 $NH_3$은 저온 플라즈마 조건에서 NO와의 환원반응이 촉진되지 않았지만 올레핀계 탄화수소에 의하여 산화된 $NO_2$의 제거에는 효과적인 경향을 보였다.

• Journal of Acupuncture Research
• /
• 제27권3호
• /
• pp.35-45
• /
• 2010

Backgrounds : Recently, commercial indirect moxibustion has been widely used as a substitute for traditional indirect moxibustion by clinicians due to its convenience in using. But, there has been lack of studies about the similarity of thermal stimulation between commercial indirect moxibustion and traditional indirect moxibustion. Objectives : To demonstrate commercial indirect moxibustion can substitute for traditional indirect moxibustion by comparing thermal stimulation between the two. Methods : We measured bottom temperature of commercial indirect moxibustion and traditional indirect moxibustion with various thicknesses of ginger and garlic. A clinical trial was performed on 18 healthy subjects to evaluate thermal stimualtion. The subjects were randomly assigned into two groups, traditional indirect moxibustion with ginger and garlic. The skin temperature and heating time were measured. They received moxibustion therapy with commercial indirect moxibustion and traditional indirect moxibustion according to their groups. Acupoint Chogcoe($LU_6$), Zusanli($ST_{36}$) and Tianshu($ST_{25}$) were used in each group for 3 times. Results : There was no difference in bottom temperature among commercial indirect moxibustion, traditional indirect moxibustion with 2mm ginger and 3mm garlic. No major difference was detected in the subjects' baseline data. There was no difference in skin temperature and heating time among these 3 type of moxibustions. Also, No major difference was detected in VAS score of thermal stimulation and frequency of burns among these 3 type of moxibustions. But, most subjects regarded their sensation weren't identical because of its own distinct characteristics. Conclusions : Commercial indirect moxibustion, traditional indirect moxibustion with 2mm ginger and 3mm garlic have same thermal stimulation. Thus, commercial indirect moxibustion can substitute for traditional indirect moxibustion.

• 한국식품영양학회지
• /
• 제11권5호
• /
• pp.506-512
• /
• 1998

In order to replance systhetic colors by natural colors as food additive, properties of Gardenia yellow color and Gardenia blue color were compared with Food yellow No. 4 and Food blue No. 1. Color differeance between Food yellow No. 4 and Gardenia yellow color was 7.55. Thermal stability of Food yellow No. 4 was above 99%. On the other hand, in case of Gardenia yellow color, showed adove 90% of residual color units in 8$0^{\circ}C$$\times$30min and 10$0^{\circ}C$$\times$30min at pH 7.0 but 75% in 121$^{\circ}C$$\times$15min. Difference of light stability between Food yellow No. 4 and gardenia yellow color was about 18%. Addition of ascorbic acid was increased about 6% in light stability. Color difference between Food blue No. 2 and Gardenia blue color was 107. Thermal stability of Food blue No. 2 was above 99%. But Gardenia blue color showed 92% of residual color units in 8$0^{\circ}C$$\times$30min and 10$0^{\circ}C$$\times$30min at pH 7.0 but 90% in 121$^{\circ}C$$\times$15min. Difference of light stability between Food blue No. 4 and Gardenia blue color was about 8%. Addition of -tocopherol was increased about 4% in light stability of Gardenia blue color.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.947-949
• /
• 1998

In this paper, the NO was oxidized $NO_2$ by using the non-thermal plasma and NOx removal characteristics were measured by showering NaOH water-solution to $NO_2$. The NO oxidation increased in the order of DC, AC, and Pulse. NOx oxidation for two stage with applied voltage was better than that for one stage with applied voltage. NO oxidation didn't depend on applied voltage. While NO oxidation was going on, NOx removal efficiency was 20-25%, however, significantly depended on the injection method of air and $H_2O$ + air. When NaOH water-solution density of 20% was showered to flue gases, NOx removal efficiency increased to 64%.

• 대한치과보철학회지
• /
• 제35권1호
• /
• pp.144-164
• /
• 1997

The purpose of this study were to investigate the chemical composition, mean particle size, linear thermal expansion coefficient and metal-bonding strength of the regular opaque powder and core powder. In this study, 4 types of ceramic powders, namely Duceram Jacket Opaque powder, Duceram Opaque powder, Vita Hi-Ceram powder, Vita VMK Paint On-88 powder were used. Chemical composition was evaluated by EDS(Energy Dispersive X-ray Spectrophotometer, Oxford QX-2000, England), particle size was measured by MALVERN Instruments(MALVERN Instruments SB. OC., U.S.A.. ad linear thermal expansion coefficient was measured by dilatometer(Motoyama, Japan). Bond strength was measured by the Universal tsting machine(Istron Co., Ltd., U.S.A.). The Results were as follows : 1. Through recognition of the relative difference in chemical composition between the core powder and the regular opaque powder, the difference in the proportion of $Al_2O_3$ in each type of material is demonstrated ; Duceram Jaket Opaque powder : 30.16%, Duceram Opaque powder : 16.60%, Vita Hi-Ceram : 63.64%, Vita VMK Paint-On 88 : 16.16%. 2. There was no significant difference in the proportion of metal-bonding materials between the core powder and the regular opaque powder. 3. In the regular opaque powder, alkaline materials were incoporated in order to increase the coefficient of thermal expansion. 4. In the particle size analysis, there was no significant difference in mean particle size or in the particle size distribution between the core powder and the regular opaque powder. 5. In the thermal expansion test for temperature range of $25-600^{\circ}C$, the regular opaque powder had higher coefficient of thermal expansion than that of core powder. 6. In the 4 point flexural bending test, there was no statistically significant difference in the mean bond strength between the core powder and the opaque powder among the Duceram products.

• 전자공학회논문지
• /
• 제51권7호
• /
• pp.103-110
• /
• 2014

최근 등장한 TSV(Through Silicon Via)기반의 3D 적층 기술은 보다 강력한 발열관리 기법을 필요로 하며 냉각 비용과 폼팩터(form factor)의 제한을 고려했을 때 소프트웨어적인 열관리 기법의 중요성이 더욱 강조되고 있다. 이러한 접근 방식의 유력한 후보 중 하나로 제시되었던 스로틀링을 통한 열관리 기법의 경우, 증가하는 버스 점유율로 인해 전체적인 성능저하를 야기하는 문제점이 있다. 본 논문에서는 향후 TSV 기반 3D SoC의 커뮤니케이션 병목 현상을 해결하기 위한 3D 네트워크-온-칩 (Network-on-Chip, NoC) 구조에서 어댑티브 스로틀링 기법을 제안하여, 열관리와 더불어 온-칩 네트워크상의 트래픽 감소를 통해 전체적인 성능향상을 목표로 한다. 본 논문에서는 실험을 통하여 기존의 방식에 비하여 스로틀링으로 인해 저하된 처리량이 최소경로 라우팅 시 최대 72% 향상됨을 알 수 있었다.

• 한국재료학회지
• /
• 제27권1호
• /
• pp.25-31
• /
• 2017

This study investigates changes in the mechanical behaviors, especially hardness and indentation load-displacement curves, of thermal barrier coatings (TBCs) brought about by thermal shock. The TBCs on the Nickel-based bondcoat/superalloy was prepared with diameters of 25.4 mm and $600{\mu}m$ thickness. The results of thermal shock cycling test from $1100^{\circ}C$ of the highest temperature indicate that the thermal shock do not influence on the mechanical behavior, but a continuous decrease in porosity and increase in hardness were observed after 1200 thermal shock cycles; these changes are believed to be due to sintering of thermal barrier coating materials. The results that no degradation in the indentation load-displacement curves indicate that the coating shows good thermal shock resistance up to 1200 cycles at $1100^{\circ}C$ in air.