• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.241-244
• /
• 2001

The design and fabrication of the surface acoustic wave(SAW) bandpass filters using slanted finger interdigital electrode transducers(IDTs) is investigated. The slanted finger IDTs are used to design SAW filters with good shape factor, a flat passband, and good out-of-band rejection characteristic. The slanted finger IDTS filter was simulated of three kind of IDTs structure. uniform-uniform IDT, uniform-withdrawal weighting IDTS, withdrawal weighting-withdrawal weighting IDTS. Uniform-withdrawal weighting IDTs structure SAW filters was designed and fabricated on 112$^{\circ}$ LiTaO$_3$, 128$^{\circ}$LiNbO$_3$ substrates. Designed SAW filter has about a 30% fractional bandwidth and a 70MHz center frequency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.822-832
• /
• 1994

DSC-HDTV image compression algorithm removes spatial, temporal, and amplitude redundancies of an image by using transform coding, motion-compensated predictive coding, and adaptive quantization, respectively. In this paper, leak processing method which is used to recover image quality quickly from scene change and transmission error and adaptive quantization using perceptual weighting factor obtained by HVS are proposed. Perceptual weighting factor is calculated by contrast sensitivity, spatio-temporal masking and frequency sensitivity. Adaptive quantization uses the perceptual weighting factor and global distortion level from buffer history state. Redundant bits according to adaptation of HVS are used for the next image coding. In the case of scene change, DFD using motion compensated predictive coding has high value, large bit rate and unstabilized buffer states since reconstructed image has large quantization noise. Thus, leak factor is set to 0 for scene change frame and leak factor to 15/16 for next frame, and global distortion level is calculated by using standard deviation. Experimental results show that image quality of the proposed method is recovered after several frames and then buffer status is stabilized.

• The Journal of Korean Medicine
• /
• v.31 no.5
• /
• pp.41-59
• /
• 2010

Objective: Headache is one of the most common symptoms in primary medical care. The purpose of this study was to support medical treatment by consideration of a new CTTH (chronic tension-type headache) oriental medical diagnosis index. Methods: An Oriental medical diagnosis questionnaire was administered to a CTTH group, migraine group and normal group. The result was classified by using LDA, CART, factor diagnosis and tested in comparison with the original diagnosis. Also, weighting method based on expert opinions was done. Results: 1. The result analyzed by using LDA has an accuracy of 93.9% in comparison with the original diagnosis. 2. High accuracy showed when the test was performed with about 35 significant questions and four questions selected based on SPSS Wilks' lambda. 3. There was accuracy of 90.9% when differentiation was performed by using CART compared with original diagnosis. 4. 10 factors has a high initial value after factor analysis, consisting of questions to the similar differentiation. 5. Diagnosis formula of headache was made by using weighting method based on expert opinions. Conclusion: Oriental medical diagnosis questionnaires make it possible to classify headaches significantly. The study about weighting method of CTTH can make it possible to classify symptoms more accurately.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.392-397
• /
• 2001

Topology optimization is applied to determine the layout of a structure whose eigenfrequency coincides with a specified frequency. The topology optimization problem is formulated to minimize the difference between the structural frequency and a given frequency using the homogenization method and the modified optimality criteria method. It turns out that the value of a weighting factor in the updating scheme plays an important role to achieve both a suitable speed and a stable convergence of an algorithm. Unlike a constant weighting factor in previous works, it is suggested that a weight factor is varied during the iteration to control the amount of the frequency change. To substantiate the proposed approach two-dimensional structural design problems are presented and the resulted topology layouts for the specified eigenfrequency are compared to layouts for maximizing the corresponding eigenfrequency.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.5
• /
• pp.17-24
• /
• 1996

In this paper, we present a robust performance improvement method for the NLCF(normalized left coprime factor) uncertain structure using loop shaping and the structure singular value. For this, we select weighting functions for a loop shaping considering condition numer, and transform the NLCF uncertain structure into the 4-block structure. However, we can't get a good performance on account of the restriction of weighting functions. To cope with this, we motivate the use of structured singular vlaue in the robust performance improvement procedure. After all, the robust performance improvement can be obtained by a factor W$_{a}$ and a scaling factor of D-K iteration.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.2
• /
• pp.79-85
• /
• 2015

Existing Differential GPS (DGPS) pseudorange correction (PRC) generation techniques based on a virtual reference station cannot effectively assign a weighting factor if the baseline distance between a user and a reference station is not long enough. In this study, a virtual reference station DGPS PRC generation technique was developed based on an enhanced inverse distance weighting method using an exponential function that can maximize a small baseline distance difference due to the dense arrangement of DGPS reference stations in South Korea, and its positioning performance was validated. For the performance verification, the performance of the model developed in this study (EIDW) was compared with those of typical inverse distance weighting (IDW), first- and second-order multiple linear regression analyses (Planar 1 and 2), the model of Abousalem (1996) (Ab_EXP), and the model of Kim (2013) (Kim_EXP). The model developed in the present study had a horizontal accuracy of 53 cm, and the positioning based on the second-order multiple linear regression analysis that showed the highest positioning accuracy among the existing models had a horizontal accuracy of 51 cm, indicating that they have similar levels of performance. Also, when positioning was performed using five reference stations, the horizontal accuracy of the developed model improved by 8 ~ 42% compared to those of the existing models. In particular, the bias was improved by up to 27 cm.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.217-231
• /
• 2019

The purpose of this study is to analyze the factors influencing consumers' selection of web-toon service through AHP (Analytic Hierarchy Process) analysis and to provide the strategy of web-toon service. To accomplish this study, theories, existing research and references related to AHP were sufficiently examined and selected the factors in the selection criteria. Surveys from consumers who used the web-toon service were conducted with selected factors. Through this, the results were analyzed by AHP analysis to find out the weighting values and the differences were examined and analyzed. The highest weighting factor in the first layer that consists of web-toon service was cinematic quality. The cinematic quality was the most important factor in the selection criteria of customers who use the web-toon service regardless of their preferred genre. Furthermore, it was confirmed that the weighting value or ranking changed in the second layer by genre. In this study, the effective basis of strategy were suggested by ranking the quantitative selection factors according to the preferred genre of consumers using web-toon services. In addition, This research provides some practical implications. That is, the web-toon service provider can easily recognize and respond to the customer's requirements, which factors are important when the customer selects a specific genre from the web-toon genre.

• Journal of the Korean Society for Library and Information Science
• /
• v.39 no.2
• /
• pp.123-146
• /
• 2005

This study aims to find consistent strategies for feature selection and feature weighting methods, which can improve the effectiveness and efficiency of kNN text classifier. Feature selection criteria and feature weighting methods are as important factor as classification algorithms to achieve good performance of text categorization systems. Most of the former studies chose conflicting strategies for feature selection criteria and weighting methods. In this study, the performance of several feature selection criteria are measured considering the storage space for inverted index records and the classification time. The classification experiments in this study are conducted to examine the performance of IDF as feature selection criteria and the performance of conventional feature selection criteria, e.g. mutual information, as feature weighting methods. The results of these experiments suggest that using those measures which prefer low-frequency features as feature selection criterion and also as feature weighting method. we can increase the classification speed up to three or five times without loosing classification accuracy.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.3
• /
• pp.9-16
• /
• 1996

LQ-servo is a robustness guaranteed multivariable controller design method based on the LQR structure to improve command following with output feedback. in this paper we introduce a weighting factor on the low frequency part of the state weighting matrix in the performance index in order to increase the low frequency gain of loop transfer function matrix T(s) in the loop shaping design method.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1991.06a
• /
• pp.28-31
• /
• 1991

In this paper, it is proposed to improve the robustness of the Fast Recursive Least Squarea(FRLS) algolithms with the exponential weighting, which is an important class of algolithms for adaptive filtering. It is well known that the FRLSalgolithm is numerically unstable with exponential weighting factor λ<1. However, introducing some gains into this algolithms, numerical errors can be reduced. An accurately choice of thegains then leads to a numerically stable FRLS algolithm with a complexity of 8m mulitiplications and we shown it by computer simulations.