• 대한기계학회논문집B
• /
• 제25권11호
• /
• pp.1476-1482
• /
• 2001

Turbulent boundary layer over a flat plate was disturbed by installing an elliptic cylinder with an axis ratio of AR=2. For comparison, the same experiment was carried out for a circular cylinder having the same vertical height. The surface pressure and the heat transfer coefficient on the flat plate were measured with varying the gap distance between the elliptic cylinder and the flat plate. The mean velocity and the turbulent intensity profile of the streamwise velocity component were measured using a hot-wire anemometry. As a result, the flow structure and the local heat transfer rate were modified by the interaction between the cylinder wake and the turbulent boundary layer as a function of the critical gap ratio where the regular vortices start to shed. For the elliptic cylinder, the critical gap ratio is increased and the surface pressure on the flat plate is recovered rapidly at downstream location, compared with the equivalent circular cylinder. The maximum heat transfer rate occurs at the gap ratio of G/B = 0.5, where the flow interaction between the lower shear layer of the cylinder wake and the turbulent boundary layer is strong.

• 한국해양공학회지
• /
• 제16권2호
• /
• pp.53-59
• /
• 2002

This paper shows the experimental results controlling the height of surface and back bead in GMAW by analyzing the unexpected gaps between base metals produced in welding and by controlling welding velocity due to the variation of the gap between base metals in thin-plate welding. The back bead behavior and burn-through in I-type butt joint $CO_2$ welding of thin mild steel are analyzed in the views of short circuit time ratio and short circuit frequency. It is shown through experimental consideration that the short circuit time ratio method is more reasonable than the short circuit frequency method in analyzing the formulation of back bead under changing the gap between base metals. Based on the these results, welding manipulator is designed so as to satisfy the bead height control in real time by measuring the short circuit time ratio. To show the effectiveness of the developed bead formulation control system, the experiment is implemented under two welding conditions such as increasing gap from 0mm to 0.8mm and gradually increasing gap from 0mm to 1.2mm. The experimental results show that the bead formulation can be controlled uniformly in spite of the variation of the gap between base metals.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.257-260
• /
• 2002

This study is intended is to analyze the blocking performance with variation of the gap of bar and kinds of metal lath for construction joint when placing concrete. According to the results, passing ratio of concrete increases with increase of vibrating time. In the case of W/C 50%, when blocking concrete with bar of D10 and D20 which the gap of bar is below 200mm, or metal lath, passing ratio of concrete is below 10%, so blocking performance is favorable. In the case of W/B 30%, while concrete does not flow out without vibration at slump 21mm, concrete flows out at some degree before vibration at slump flow 65mm and then, as 5 seconds passes after first vibration, final passing ratio shows about 85~90%. When blocking concrete by bar D10 of the gap 20mm, bar D20 of the gap 10mm and metal lath, it is thought that concrete can be blocked effectively because final passing ratio is below 10%.

• 한국강구조학회 논문집
• /
• 제16권6호통권73호
• /
• pp.769-780
• /
• 2004

본 논문의 목적은 인장용 연결 플레이트를 갖는 냉간성형 각형강관 갭 N형 접합부의 실험연구를 통하여 접합부 거동을 평가하는데 있다. 실험을 위한 주요 변수로는 주관의 폭두께비, 주관에 대한 지관의 폭의 비, 편심비, 압축지관 형상, 지관의 각도, 주관 상부 플랜지면 보강 등이 있다. 이와 같은 변수들로 구성된 갭 N형 접합부에 대한 내력 및 파괴모드 등에 대하여 실험을 통해 고찰하고자 한다. 실험결과, 갭 N형 접합부는 폭비에 관계없이 접합부의 인장측 변위가 선행하여 접합부의 내력이 결정되었으며, 접합부 파괴는 접합된 주관면의 찢어짐 파괴모드로 결정되었다. 인장 및 압축측 폭비(${\beta}$)가 클수록 주관 폭두께비가 작을수록 접합부의 항복하중 및 최대하중은 선형으로 상승하는 것으로 나타났다. 주관의 폭두께비($2{\gamma}$)가 작을수록 접합부의 내력비교 곡선은 급격히 상승함을 알 수 있다. 인장용 연결 플레이트를 갖는 갭 N형 접합부에 대하여 변수에 따른 접합부의 하중, 초기강성, 연성능력 및 파괴모드 변화 등에 대한 결과에 대해서도 정리하여 나타내었다.

• 대한기계학회논문집B
• /
• 제25권11호
• /
• pp.1632-1639
• /
• 2001

Control of drag farce on a circular cylinder using a detached splitter plate is numerically studied for laminar flow. A splitter plate with the same length as the cylinder diameter(d) is placed horizontally in the wake region. Its position is described by the gap ratio(G/d), where G represents the gap between the cylinder base point and the leading edge of the plate. The drag varies with the gap ratio; it has the minimum value at a certain gap ratio for each Reynolds number. The drag sharply increases past the optimum gap ratio; this seems to be related to the sudden change in bubble size in the wake region. This trend is consistent with the experimental observation currently available in case of turbulent flow. It is also found that the net drag coefficient significantly depends on the variation of base suction coefficient.

• 한국초등수학교육학회지
• /
• 제19권3호
• /
• pp.371-386
• /
• 2015

비의 값과 비율 용어 사용에 관한 다양한 방안이 제안되어 왔다. 이 논문에서는 비의 값과 비율 용어에 관한 선행 연구에 내재된 상이한 관점들을 추출하고, 이 관점들과 최근 수학 교과서의 비의 값 및 비율 용어 사용 방식의 관련성을 분석하였다. 분석 결과는 비의 값과 비율 용어 사용에 관한 상이한 관점들이 경합해 왔음을 보여준다. 이와 같은 혼란이 어디에 기인하는 것인지를 명확히 하고자, 비의 값과 비율 용어를 맥락과 기준량에 초점을 맞추어 종합적으로 분석하였다. 이 분석에 기초하여 기존 문헌에서 추출한 관점들을 자리매김하고, 비의 값과 비율 용어 사용에 관한 몇 가지 시사점을 도출하였다.

• Carbon letters
• /
• 제28권
• /
• pp.72-80
• /
• 2018

In this study, an empirical relationship between the energy band gap of multi-walled carbon nanotubes (MWCNTs) and synthesis parameters in a chemical vapor deposition (CVD) reactor using factorial design of experiment was established. A bimetallic (Fe-Ni) catalyst supported on $CaCO_3$ was synthesized via wet impregnation technique and used for MWCNT growth. The effects of synthesis parameters such as temperature, time, acetylene flow rate, and argon carrier gas flow rate on the MWCNTs energy gap, yield, and aspect ratio were investigated. The as-prepared supported bimetallic catalyst and the MWCNTs were characterized for their morphologies, microstructures, elemental composition, thermal profiles and surface areas by high-resolution scanning electron microscope, high resolution transmission electron microscope, energy dispersive X-ray spectroscopy, thermal gravimetry analysis and Brunauer-Emmett-Teller. A regression model was developed to establish the relationship between band gap energy, MWCNTs yield and aspect ratio. The results revealed that the optimum conditions to obtain high yield and quality MWCNTs of 159.9% were: temperature ($700^{\circ}C$), time (55 min), argon flow rate ($230.37mL\;min^{-1}$) and acetylene flow rate ($150mL\;min^{-1}$) respectively. The developed regression models demonstrated that the estimated values for the three response variables; energy gap, yield and aspect ratio, were 0.246 eV, 557.64 and 0.82. The regression models showed that the energy band gap, yield, and aspect ratio of the MWCNTs were largely influenced by the synthesis parameters and can be controlled in a CVD reactor.

• 대한기계학회논문집B
• /
• 제20권8호
• /
• pp.2637-2649
• /
• 1996

Flow characteristics and aerodynamic forces acting on an elliptic cylinder placed in a plane boundary layer were investigated experimentally. Four cylinder models with axis ratio(major axis to minor axis, AR=A/B) of 1, 2, 3, and 4 having the same equivalent diameter were used in this experiment. The Reynolds number based on the equivalent diameter $D_e$(=20mm) was 13,000. In the case of circular cylinder, regular vortex shedding occurs for the cylinder gaps larger than G/B=0.3 and is not almost related to the boundary layer thickness. But, for the elliptic cylinders, the vortex shedding frequency is increased with increasing the gap ratio (G/B) and the axis ratio (AR) of elliptic cylinders. The maximum drag coefficient acting on a circular cylinder is mainly affected by the boundary layer thickness. But, the elliptic cylinders(AR$\geq$2), except for the smaller gap G/B<0.2, show a nearly constant drag coefficient which is much smaller than that of a circular cylinder. The base pressure on the flat plate decreases with increasing the axis ratio(AR) of the elliptic cylinder. In the case of a circular cylinder, the base pressure has the minimum value at the gap ratio G/B=0.4, but it occurs at G/D=2 for elliptic cylinders. The mean velocity of the cylinder wake is quickly recovered at a small cylinder height ratio(H/$\delta$), but the turbulent intensity is rapidly recovered at a large cylinder height ratio(H/$\delta$). The effective wake region in the plane boundary layer is shrinkaged with increasing the axis ratio(AR) of elliptic cylinder. And the drag coefficient and streamwise turbulent intensity of the elliptic cylinder with AR=4 are less than half of those for the circular cylinder(AR=1).

• 한국추진공학회지
• /
• 제19권2호
• /
• pp.38-45
• /
• 2015

본 연구에서는 고고도의 저압환경 구현을 목적으로 사용되는 이젝터의 설계기법을 정립하고 상온가스를 이용한 실험을 통하여 성능변수와 형상변수에 따른 이젝터 작동 특성을 관찰하였다. 유량비, 압축비, 팽창비를 성능변수로 선정하고, 간극비를 형상변수로 선정하여 실험을 수행하였다. 실험결과 이젝터의 성능을 예측할 수 있는 성능변수들의 관계를 파악하였으며, 간극비 보다는 성능변수가 이젝터의 성능에 큰 영항을 미치는 것을 확인하였다.

• 한국프랜차이즈경영연구
• /
• 제6권1호
• /
• pp.21-41
• /
• 2015

The purpose of the study is to review the real situations of the income-gap between urban and rural areas which is focused on as one of the biggest issues revealed in the process of Chinese economic development and to find out which factors will alleviate or deteriorate such income-gap, also to find out such factors will effect differently on the regional characteristics. To analyze it, six factors such as industrialization-ratio, urbanization-ratio, tertiary industry-ratio, the level of both governmental educational support and agricultural support, and Chinese dual-economic structure are considered as explanatory variables, and OLS regression analysis was implemented to the factor data for the period of 1986-2007 about Chinese 31 districts(castles and cities). The results of the analysis show that both industrialization factors and urbanization factors affect significantly to alleviate income-gap between urban and rural areas, and as predicted, they also shows that dual-economic structure between urban and rural areas is the most biggest factors to enlarge the above mentioned income-gap. However, in accordance to the different level of economic development in eastern, central, and western districts the study shows that such factors will affect them differently respectively. The contents are as follows; In eastern district governmental educational support factor will affect the most great influence to alleviate the income-gap, in central district industrialization factor will affect the most great influence to alleviate the gap, and western district governmental agricultural support factor will affect the most great influence to alleviate the gap. Therefore, in solving the issue of income-gap between urban and rural areas in China we recommend that it is necessary for more differential policy in considering regional characteristics than unilateral policy to Chinese whole areas.