• Journal of The Korean Association For Science Education
• /
• v.33 no.2
• /
• pp.425-443
• /
• 2013

We developed problem-solving type inquiry learning programs reflecting scientists' research process and analyzed the activities of science-gifted high school students, and the understanding and the effects of the programs after implementation in class. For this study, twelve science-gifted students in the 10th grade participated in the program, which consisted of three different modules - making a cycloidal pendulum, surface growth, and synchronization using metronomes. Diet Cola Test (DCT) was used to find out the effect on the improvement of the ability to design experiments by comparing pre/post scores, with a survey and an interview being conducted after the class. Each module consisted of a series of processes such as questioning the phenomenon scientifically, designing experiments to find solutions, and doing activities to solve the problems. These enable students to experience problem-solving type research process through the program class. According to this analysis, most students were likely to understand the characteristics of problem-solving type inquiry learning programs reflecting the scientists' research process. According to the students, there are some differences between this program class and existing school class. The differences are: 'explaining phenomenon scientifically,' 'designing experiments for themselves,' and 'repeating the experiments several times.' During the class students have to think continuously, design several experiments, and carry them out to solve the problems they found at first. Then finally, they were able to solve the problems. While repeating this kind of activities they have been able to experience the scientists' research process. Also, they showed a positive attitude toward the scientists' research by understanding problem-solving type research process. These problem-solving type inquiry learning programs seem to have positive effects on students in designing experiments and offering the opportunity for critical argumentation on the causes of the phenomena. The results of comparing pre/post scores for DCT revealed that almost every student has improved his/her ability to design experiments. Students who were accustomed to following teacher's instructions have had difficulty in designing the experiments for themselves at the beginning of the class, but gradually, they become used to doing it through the class and finally were able to do it systematically.

• Journal of Korean Home Economics Education Association
• /
• v.18 no.3 s.41
• /
• pp.41-60
• /
• 2006

The system of teaching culinary practice needs drastic modification to catch up with dietary life and education curriculum changes. To reflect such changes, it is necessary to instill a strong will and interest as well as educational environment improvement in teachers. In this sense, this study researched the teachers' stages of concerns, levels of use, innovation configuration, and intervention demands, based on the CBAM(Concerns Based Adoption Method) developed by Hord et. al. For the survey, 500 questionnaires sent by mail and 187 were analyzed by SPSS/win 10.0 program. The results are summarized as follows. 1) The teachers stages of concerns on culinary practice is assessed to be in the lowest level of perceptual stage, which indicates a state of indifference. 2) In terms of the levels of use, routine use was the highest, followed by refinement use, integrated use, research use, and reinvent use in descending order. Mechanical use posted the lowest level. Even though the stages of concern showed the beginning stage, the Level of use was relatively high. 3) About the innovation configuration, approximately 30% of the teachers were not accomodate the culinary practice referred to the 7th National Education Curriculum. 4) According to the intervention demands on culinary practice education, it was found that teachers generally wanted more interventions in every component. Among the intervention components, the highest demand was on the support for facility. Demand on the financing is the second highest. Teachers in the level of routine use demanded more information and materials supply and individual encouragement, but teachers in the level of preparation needed study opportunity for training on operation skills more.

• Journal of Korean Home Economics Education Association
• /
• v.19 no.2
• /
• pp.1-12
• /
• 2007

This study analyzed the recognition and utilization regarding teacher's guidebook for middle school technology-home economics class in the 7th Educational Curriculum. The data were collected via e-mail to teachers teaching home economics in middle schools. These e-mail addresses were acquired from middle school web pages registered on the Educational Board. The 355 data were analyzed using the SPSS program. The results were as follows: First, teachers recognized highly the necessity of teacher's guidebook. However, as the actual guidebook was not adequately helpful, the overall degree of satisfaction was relatively low. Teachers utilizing guidebook had more positive recognition on teacher's guidebook than teachers who did not. And teachers majored in technology education thought teacher's guidebook more helpful compared with teachers majored in home economics education. Second, teachers referenced teacher's guidebook mostly for field practice guidance. Third, teachers who did not utilize teacher's guidebook used other reference materials such as Internet Web sites and audiovisual materials. They were most commonly used for the reason that the contents were ample and easy to access. Fourth, the followings were suggested to improve teacher's guidebook. The provision of learning contents that can be practically used in class, the various samples of teaching-learning method, the specified methods of planning and criteria for performance assessment, the adequate supplementations regarding textbook contents, and the improvement of the outward layout format of the guidebook.

• The Journal of Korean society of community based occupational therapy
• /
• v.5 no.1
• /
• pp.11-21
• /
• 2015

Objective : This study is aimed to examine the degree of independence in stroke patients residing in a community based on their self-efficacy and Instrumental Activities of Daily Living and also correlation between community-residing stroke patients and their guardians by figuring out the life quality of their guardians. Methods : For total two weeks between May 12th and 23rd, 2014, this researcher collected data by using a survey (K-IADL, a scale to measure self-efficacy, WHOQOL-BREF) targeting 138 stroke patients who received over 24 points in MMSE-K among the outpatients of three hospitals located in Busan Metropolitan City and two hospitals located in Geoje-si, Gyeongsangnam-do, and total 125 sheets were finally used for analysis. Results : Among the 125 patients, 70 were males, and 55 were females, and their average age was 58.72 (16 to 82). The subjects' general self-efficacy (p<0.01) and detailed self-efficacy (p<0.01) indicated significant correlation with their guardian's life quality, and there was no significant correlation found between their Instrumental Activities of Daily Living and their guardian's life quality. Conclusion : Their general self-efficacy and detailed self-efficacy indicated correlation with their guardian's life quality, and among their general characteristics, the factor of their financial situation indicated correlation with their guardian's life quality. In conclusion, when stroke patients' self-efficacy is higher, their guardian's life quality increases, too, and if their financial situation is more favorable, their guardian's life quality gets higher. However, stroke patients' Instrumental Activities of Daily Living did not indicate correlation with their guardian's life quality. When looking at the chronic trend of outpatients, therapeutical plan must be established about the self-efficient recovery for the development of those who are not satisfied.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.975-976
• /
• 1993

This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}

• (The) Research of the performance art and culture
• /
• no.36
• /
• pp.415-440
• /
• 2018

On September 23, 2015, the Ministry of Education announced the 2015 revision of educational curriculum which aimed at 'cultivating creative talents' based on the Article 23, Section 2 of the Elementary and Secondary Education Law. As a result, music curriculum have also been partially revised, which seems to maintain the 2009 revision of music curriculum. Although Jeongganbo 井間譜 is already exposed in the music curriculum for the third and forth grades of elementary school, the learning content about how to read Jeongganbo and how to express the pitch and length of sound including the origin of its name and the background of its invention are dealt with specifically in the fifth and sixth grades. Jeongganbo is known as the oldest mensural notation in the Orient created by King Sejong of the Joseon Dynasty in the middle of the $15^{th}$ century, and it was used for the first time in Sejong sillok akbo 世宗實錄樂譜 (Scores in the Annals of King Sejong), the oldest musical score still in existence. However, in the music textbooks as well as the most of specialized books related to the Korean traditional music, it is uncritically accepted without providing clear grounds that Sejong invented Jeongganbo himself. If so, it is necessary to investigate on which grounds it is claimed that Sejong invented Jeongganbo. This paper first examined the grounds of the proposition that "Sejong invented Jeongganbo," which is introduced in the music textbooks for the fifth and sixth grades of elementary school, by separating it into Sejong's creation of Sinak 新樂 (new music), Sejo's invention of Jeongganbo and Sejong's invention of Hangeul. Next, this paper examined how the subject of the invention of Jeongganbo has been described in the textbooks for the fifth and sixth grades in elementary school based on the 2009 revision of music curriculum, and suggested the direction of a desirable music education by pointing out the related problems. According to historical records and circumstances such as Sejong's creation of Sinak, Sejo's invention of Jeongganbo with 16 Jeonggan (square) in one vertical line, Sejong's invention of Hangeul and so on, it seems to be the most reasonable that Sejong is the subject of the invention of Jeongganbo as of now. However, the attitude of the musical academy to accept and educate the unclear thing as if it is a fact does not seem desirable. Therefore, I suggest that it should be described "Jeongganbo was invented in the period of Sejong" or "it is supposed that Jeongganbo was invented by Sejong" rather than presenting "Sejong made Jeongganbo" or "created" until revealing the clear evidence about the subject of Jeongganbo.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.4
• /
• pp.294-303
• /
• 2018

To set an optimal harvest time for five main whole-crop silage (WCS) rice cultivars, Nokyang (Ny), Mogwoo (Mw), Mogyang (My), Nokwoo (Nw) and Yeongwoo(Yw), based on feed value and dry matter yield, we analyzed water content (WC), feed values such as percent crude protein (CP), crude fat (CF), crude ash (CA), neutral detergent fiber (NDF), acid detergent fiber (ADF), estimated total digestible nutrients (TDN), and calculated their dry matter yield (DMY). These parameters were estimated at the booting stage and every 10 days from start of heading to 45 days after heading (DAH) to identify the optimal harvest time for these rice varieties. In all varieties, except Ny, the WC was about 65% on the $30^{th}$ DAH. In terms of WC, it is judged that there would be no major problem in preparing high quality silage when harvested between 20~30 DAH for Ny and about 30 days for the other cultivars. The CP and CA decreased significantly as the harvest time was delayed in all varieties (p<0.05). However, the CF in the tested varieties generally declined as DAH increased, and then increased again(p<0.05). The decrease in ADF and NDF was significantly different from the booting stage to 45 DAH in all varieties (p<0.05) and the estimated TDN increased gradually in all varieties as the harvest time was delayed. The TDN of all varieties, except Nw, was over 70% around 30 DAH. As harvest time was delayed, the DMY for all WCS rice increased significantly (p<0.05). The maximum DMY for each cultivar was observed at 45 DAH, however, no significant difference (p<0.05) was seen after 40 DAH for Ny and Yw, 30 DAH for Mw and Nw, and 20 DAH for My. Considering these results and others factors such as lodging, shattering, digestibility of grains, conversion of eating rice, etc., the optimal harvest time for silage use of all WCS rice tested was generally the yellow ripening stage, at about 30 DAH (30~40 DAH for Ny and Mw, and 30 DAH for My, Nw and Yw).

• (The) Research of the performance art and culture
• /
• no.34
• /
• pp.355-382
• /
• 2017

In this study, pieces of statements of sinawi successors, which served the ground of sinawi theory of Lee(that are found only in reports and theses) were searched from notebooks or cassette tapes of Lee. Then, this study tried to trace the process that the theory of sinawi was established based on the fieldwork of sinawi and relevant data, and to shed light on the significance. With the understanding from the early days that life of minsokak can be found in musical scenes in the region, Lee wandered around the scenes of minsokak(folk music) in the nation, recorded minsokak, and collected dialogues with successors of minsokak with about 2,000 cassette tapes and 300 notebooks. Especially, in the fieldwork data on sinawi that Lee possesses contain dialogues with the newly found sinawi successors that Lee found in the scene of sinawi in Gyeonggido province, Jeollado province, and Gyeongsangdo province over numerous visits for over 20 years from the early 1970s. Sometimes the record includes improvised sinawi performance. As the fieldwork of sinawi by Lee was conducted comparatively early, there are a lot of testimonies of successors who remember the sinawi scene of the past. Using these data, Lee published theories related to sinawi on reports and theses. His representative thesis is about 'Sinawi Chung'(1979). After listening to the testimony of Younghee Ji, the master of Gyeonggi haegeum sinawi in his first fieldwork of sinawi, he started his research on sinawi chung of piri, daegeum, and haegeum in Gyeonggido province and Honam area. Based on the testimonies on sinawi chung of 11 sinawi successors, Lee published 'Sinawi Chung'. In 1987, he extended the scope his research to sinawi-kwon(圈), which includes Gyeongnam area, found 12 new sinawi successors in Gyeonggi, Honam, and Gyeongnam areas, and based on their testimonies, complemented the theory of sinawi chung and published it. Fortunately, most of the dialogues with sinawi successors quoted in his reports or theses are recorded in his notebooks or cassette tapes. When these data are released, it is expected that a new theory of sinawi or minsokak will be born.

• Journal of Service Research and Studies
• /
• v.13 no.2
• /
• pp.41-61
• /
• 2023

The universal form of life in the era of the 4th industrial revolution can probably be summarized as the keyword "non-face-to-face". In particular, in terms of consumption activities, face-to-face contact is gradually changing to a system that minimizes, and offline stores are rapidly changing to non-contact services through kiosks and robots. The social structure is also changing with the passage of time, and most fundamentally, our dietary consumption patterns are changing. In particular, the increase in single-person households and the aging population are having a great impact on changes in the food service industry, which is closely related to dietary life. The HMR (Home Meal Replacement) market has grown significantly as the labor of cooking at home has decreased and the use of substitute foods has increased. As the size of the market has grown, the types of businesses that provide products have also diversified. The development of technology, non-face-to-face culture, and corporate management efficiency are intertwined, and unmanned stores are spreading recently. In this study, service quality attributes of HMR unmanned stores, where competition is gradually intensifying, are classified, and service quality classification using the Kano model and Timko's customer satisfaction coefficient are calculated to provide implications for service management based on customer satisfaction. As a result of the analysis, 'products with short cooking time' and 'variety of products (menu)' were classified as attractive qualities, and 'cleanliness inside/outside of the store' and 'products at reasonable prices' were classified as unified quality. In addition, 'convenience of self-checkout process' was classified as a natural quality, and 'convenience of in-store passage' was classified as an indifferent quality. Furthermore, when the service factor was satisfied within the HMR unmanned store, the factor with the highest satisfaction coefficient was 'product (menu) variety', and the factor with the highest dissatisfaction factor was 'convenience of self-checkout process'. Through the results of this study, it is intended to derive priorities in service quality management of HMR unmanned stores and provide strategic implications for related businesses.

• Journal of Venture Innovation
• /
• v.4 no.2
• /
• pp.97-108
• /
• 2021

Labor contracts appear in form as an exchange relationship between labor products and wages, but since they transcend the level of simple barter, they can be economically identified as "trading" and can be identified as "rental." From a legal point of view, a legal device that legally supports and imposes binding force on commodity exchange relations is a contract. Such a labor contract led to a relationship in which wages were received and a certain amount of time was placed under the direction and supervision of the employer as a counter benefit to the receipt of wages. Since working hours are subordinate hours with one's labor under the disposition authority of the employer, long hours of work can be done for the health and safety of workers and furthermore, it can be an act that violates the value to enjoy as a human being. The reduction of working hours needs to be shortened in terms of productivity and enjoyment of workers' culture so that they can expand and reproduce, but users' corporate management labor and production activities should also be compatible compared to those pursued by capitalist countries. Working hours can be seen as individual time and time in society as a whole, and long hours of work at the individual level are reduced, which is undesirable at the individual level, but an increase in products due to an increase in production time at the social level can help social development. It is necessary to consider working hours in terms of finding the balance between these individual and social levels. If the regulation method of working hours was to regulate the total amount of working hours, flexibility and elasticity of working hours are a qualitative regulation method that allows companies to flexibly allocate and organize working hours within a certain range of up to 52 hours per week. Accordingly, it is necessary to shorten working hours, but expand and implement the flexible working hours system according to the situation of the company. To this end, it is necessary to flexibly operate the flexible working hours system, which is currently limited to six months, handle the selective working hours by agreement between employers and workers, and expand the target work of discretionary working hours according to the development of information and communication technology and new types based on the 4th industrial revolution.