• 제목/요약/키워드: Testing procedure

검색결과 880건 처리시간 0.03초

임시 시멘트 제거방법이 시멘트 유지형 임플란트 보철물의 유지력에 미치는 영향 (The Effect of Temporary Cement Cleaning Methods on the Retentive Strength of Cementation Type Implant Prostheses)

  • 신황규;송영균;신수연
    • 구강회복응용과학지
    • /
    • 제27권2호
    • /
    • pp.125-140
    • /
    • 2011
  • 보철물을 기능적으로 평가하기 위해 임시 시멘트로 임시 합착을 한 경우 보철물 내면의 잔여 임시 시멘트는 레진 시멘트를 이용한 최종 합착에 있어서 부정적인 영향을 미칠 수 있다. 이에 본 연구는 다양한 임시 시멘트 제거 방법과 임시 시멘트의 잔여 성분이 임플란트 전용 레진 시멘트와 보철물의 유지력에 어떠한 영향을 미치는지를 알아보고자 하였다. 임플란트 지대주는 일반적인 시멘트 유지형 보철물 제작에 사용되는 높이 5.5 mm, 직경 4.5mm, 6도의 축면 경사도와 chamfer 변연을 갖는 기성품(Solid abutment, GSRAS4621, Osstem Implant Co., Busan, Korea)을 사용하였다. 40개의 주조시편을 제작하여 합착 전 70 psi하에 공기입자 분사법을 시행하였고, 10개의 시편을 임시 시멘트의 합착과정 없이 바로 최종 시멘트로 합착하여 대조군으로 설정하였으며 나머지 시편을 각 10개씩 임시 시멘트 제거를 위하여 오렌지 솔벤트를 이용한 군, 초음파 세척을 이용한 군, 공기입자 분사법을 이용한 군으로 나누었다. 임시 시멘트의 합착과 분리 후 제거과정을 거쳐 최종 시멘트로 임플란트 전용 시멘트($Premier^{(R)}$ Implant $Cement^{TM}$, Premier Co., PA, U.S.A.)를 사용하여 최종 합착을 실시하였다. 각 시편은 10분간 5 kg의 하중 하에 합착하였으며 열순환을 거쳐 만능시험기에서 분당 0.5 mm의 속도로 인장접착강도를 측정하였다. 측정이 끝난 뒤 모든 시편을 초음파 세척과 공기입자 분사법, 증기 세척의 과정을 통해 내면의 잔여 성분을 제거하였다. 완전 건조 후 비유지놀계 임시 시멘트를 사용하여 다시 임시 합착, 분리를 거친 후 동일한 실험 과정을 반복하였고 인장접착강도를 측정하여 다음의 결과를 얻었다. 오렌지 솔벤트를 사용한 군이 가장 작은 유지력을 나타냈으며 초음파 세척법을 사용한 군과 공기 입자 분사법을 사용한 군과 비교시 통계적으로 유의한 차이가 있었다(p<0.05). 초음파 세척법을 사용한 군과 공기 입자 분사법을 사용한 군 간의 비교시 통계적으로 유의한 차이가 없었다. 오렌지 솔벤트를 사용한 군은 대조군과 비교시 통계적으로 유의한 차이가 있었으며(p<0.05), 초음파 세척법을 사용한 군과 공기 입자 분사법을 사용한 군은 대조군과 비교시 통계적으로 유의한 차이가 없었다. 임시 시멘트의 유지놀 성분의 유무에 따른 비교시 통계적으로 유의한 차이가 없었다. 이상의 결과로부터 임시 시멘트 제거를 위해 오렌지 솔벤트만을 사용하는 것은 임플란트 전용 시멘트를 사용한 최종 합착시 유지력 감소의 원인이 될 수 있음을 알 수 있었으며, 임플란트 보철물 내면의 임시 시멘트를 효과적으로 제거하기 위한 방법으로 초음파 세척법, 공기 입자 분사법, 또는 이들의 복합적인 사용이 필요함을 알 수 있었다.

상아질-복합레진 접착계면의 파괴거동에 대한 연구 (A STUDY ON FRACTURAL BEHAVIOR OF DENTIN-RESIN INTERFACE)

  • 류길주;최기운;박상진;최경규
    • Restorative Dentistry and Endodontics
    • /
    • 제32권3호
    • /
    • pp.208-221
    • /
    • 2007
  • 파괴 인성 실험은 상아질-복합레진 계면의 파절 저항성을 평가할 수 있는 임상적으로 신뢰 할 만한 방법이다. 본 연구의 목적은 상아질-레진 계면의 파괴인성과 미세인장결합강도를 측정하여 이 두 실험방법이 상아질-레진 결합을 평가하는 데 가지는 유용성을 비교, 평가하는 것이다 파괴 인성 측정에는 short-rod 시편 형태를 이용하였다. 각 시편에서는 소의 하악절치에서 절단한 치아 절편을 포함시켜 결합면을 얻었다. 미세인장 결합강도 또한 소의 하악절치 순면을 연마하여 상아질을 노출시킨 후 상아질 접착제를 도포하고 레진 블록을 축조하여 측정하였다. 각 시편들은 $37^{\circ}C$ 증류수에 24시간 보관한 후 각 실험방법에 맞게 인장력을 가하여 측정치를 구하였다. 통계분석은 95% 신뢰수준의 ANOVA와 Tukey's test를 이용하였으며, 두 실험방법의 상관관계를 보기 위해 Pearson's 상관계수를 계산하였다. 전자현미경 검사를 통해 미세구조 또한 관찰하여 다음과 같은 결론을 얻었다. 1. 파괴인성은 SE군이 가장 높은 값을 나타냈으며, Adper Single Bond 2 (SB), OptiBond Solo (OB) ONE-STEP PLUS (OS), ScotchBond Multi-purpose (SM)군 순으로 나타났고, Clearfil SE Bond (SE)군은 다른 실험군에 비해 유의하게 높은 값을 나타내었으나 (p <0.05), 다른 실험군 사이에는 유의차가 없었다 (p > 0.05). 2. 미세인장결합강도는 SE군이 가장 높은 값을 나타냈으며, SB, OB, SM, 그리고 OS 순으로 나타났다. SB, OB, SM, SE군 사이에는 통계학적인 유의차가 없었으나 (p > 0.05), OS군의 미세인장결합강도는 다른 4개의 실험군에 비해 낮은 값을 나타내었다 (p < 0.05). 3. FE-SEM관찰에서 피막도가 두껍게 나타난 SM군, SE군과 피막도가 얇은 OS군, OB군, SB군 간에 파괴양상이 다르게 나타났다 즉 전자는 접착층 내 파괴가 일어난 반면, 후자는 resin tag나 레진 침투층 내에서 파절되는 양상을 나타내었다. 4. 파괴 인성과 미세인장결합강도 사이에는 통계학적으로 유의 한 상관 관계가 없었다 ($r^2=0.223$, t=0.927). 이와 같은 결과를 토대로, 상아질 접착제의 임상적 효율성을 평가하고자 할 때는 결합강도 뿐만 아니라. 파괴인성도 함께 고려하여 임상적용의 예견성을 높여야 한다고 결론내릴 수 있다.

열순환이 상아질 접착제의 결합 내구성에 미치는 영향 (THE EFFECT OF THERMOCYCLING ON THE DURABILITY OF DENTIN ADHESIVE SYSTEMS)

  • 문영훈;김종률;최경규;박상진
    • Restorative Dentistry and Endodontics
    • /
    • 제32권3호
    • /
    • pp.222-235
    • /
    • 2007
  • 이 논문의 목적은 열순환이 4종 상아질 접착 시스템의 결합 내구성에 미치는 영향을 측정한 것이다. 제3대구치의 상아질층을 노출시킨 후, 무작위로 8개군으로 나눈다: 3단계 산부식 시스템 (Scotchbond Multi-Purpose Plus; SM, All Bond-2 ; AB), 2 단계 산부식 시스템 (Single Bond; SB, One Step plus, OS), 2단계 자가부식 시스템 (Clearfil SE Bond; SE, AdheSE; AD), 1 단계 자가부식 시스템 (Promp L-Pop ; PL, Xeno III; XE). 8개 군에 각 상아질 접착제를 제조사의 지시에 따라 도포하고 복합레진 (Z250)을 적층한 후, 광조사한다. $37^{\circ}C$ 증류수에서 24시간 보관한 후, 각 군마다 정해진 프로그램으로 0, 1000, 2000회 열순환한 후, 저속 diamond saw로 $1\times1mm$ 막대형 시편을 제작한다. Universal testing machine (EZ-test; Shimadzu, Japan)으로 미세인장 결합강도를 측정하였고, 유의수준 0.05 level에서 ANOVA / Duncan's test로 통계분석 하였다. 상아질측 파단면과 접착계면에 대한 주사전자현미경 관찰을 시행하였다. 이 연구의 결과는 다음과 같다; 1. 3단계 상아질 접착제의 결합강도는 열순환 전후에 통계학적으로 유의한 변화를 나타내지 않았다. 2단계 산부식형 상아질 접착제의 결합강도는 열순환 처리에 의하여 유의하게 감소되었다. 2. 2단계 자가부식형 접착제 (SE)의 결합강도가 가장 높았고, 1단계 자가부식 접착제 (PL, XE)는 실험군 중 가장 낮은 결합강도를 보였다. 3. 모든 접착제는 주로 접착성 파괴가 발생하였고, 열순환에 의하여 산부식형 접착제는 접착성 파괴가, 1단계 자가부식형 접착제에서는 혼합형 파괴가 증가하는 경향을 나타내었다. 이상의 결과로, 상아질 접착제의 접착단계/과정이 결합내구성에 영향을 미침을 알 수 있었다. 따라서 접착과정의 단순화가 반드시 접착에 효과적이라고 할 수 없다.

접착강화제 도포후 인공타액에 오염된 표면의 처리방법에 따른 복합레진의 번연누출과 전단결합강도 (MARGINAL MICROLEAKAGE AND SHEAR BOND STRENGTH OF COMPOSITE RESIN ACCORDING TO TREATMENT METHODS OF ARTIFICIAL SALIVA-CONTAMINATED SURFACE AFTER PRIMING)

  • 조영곤;고기종;이석종
    • Restorative Dentistry and Endodontics
    • /
    • 제25권1호
    • /
    • pp.46-55
    • /
    • 2000
  • During bonding procedure of composite resin, the prepared cavity can be contaminated by saliva. In this study, marginal microleakage and shear bond strength of a composite resin to primed enamel and dentin treated with artificial saliva(Taliva$^{(R)}$) were evaluated. For the marginal microleakage test, Class V cavities were prepared in the buccal surfaces of fifty molars. The samples were randomly assigned into 5 groups with 10 samples in each group. Control group was applied with a bonding system (Scotchbond$^{TM}$ Multi-Purpose plus) according to manufacture's directions without saliva contamination. Experimental groups were divided into 4 groups and contaminated with artificial saliva for 30 seconds after priming: Experimental 1 group ; artificial saliva was dried with compressed air only, Experimental 2 group ; artificial saliva was rinsed and dried. Experimental 3 group ; cavities were etched with 35% phosphoric acid for 15 seconds after rinsing and drying artificial saliva. Experimental 4 group ; cavities were etched with 35% phosphoric acid for 15 seconds and primer was reapplied after rinsing and drying artificial saliva. All the cavities were applied a bonding agent and filled with a composite resin (Z-100$^{TM}$). Specimens were immersed in 0.5% basic fuschin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from one specimen. Degree of marginal leakage was scored under stereomicroscope and their scores were averaged from four sections. The data were analyzed by Kruscal-Wallis test and Fisher's LSD. For the shear bond strength test, the buccal or occlusal surfaces of one hundred molar teeth were ground to expose enamel(n=50) or dentin(n=50) using diamond wheel saw and its surface was smoothed with Lapping and Polishing Machine(South Bay Technology Co., U.S.A.). Samples were divided into 5 groups. Treatment of saliva-contaminated enamel and dentin surfaces was same as the marginal microleakage test and composite resin was bonded via a gelatin capsule. All specimens were stored in distilled water for 48 hours. The shear bond strengths were measured by universal testing machine (AGS-1000 4D, Shimaduzu Co., Japan) with a crosshead speed of 5 mm/minute. Failure mode of fracture sites was examined under stereomicroscope. The data were analyzed by ANOVA and Tukey's studentized range test. The results of this study were as follows : 1. Enamel marginal microleakage showed no significant difference among groups. 2. Dentinal marginal microleakages of control, experimental 2 and 4 groups were lower than those of experimental 1 and 3 groups (p<0.05). 3. The shear bond strength to enamel was the highest value in control group (20.03${\pm}$4.47MPa) and the lowest value in experimental 1 group (13.28${\pm}$6.52MPa). There were significant differences between experimental 1 group and other groups (p<0.05). 4. The shear bond strength to dentin was higher in control group (17.87${\pm}$4.02MPa) and experimental 4 group (16.38${\pm}$3.23MPa) than in other groups, its value was low in experimental 1 group (3.95${\pm}$2.51 MPa) and experimental 2 group (6.72${\pm}$2.26MPa)(p<0.05). 5. Failure mode of fractured site on the enamel showed mostly adhesive failures in experimental 1 and 3 groups. 6. Failure mode of fractured site on the dentin did not show adhesive failures in control group, but showed mostly adhesive failure in experimental groups. As a summary of above results, if the primed tooth surface was contaminated with artificial saliva, primer should be reapplied after re-etching it.

  • PDF

레진시멘트의 접착 내구성에 관한 연구 (THE BONDING DURABILITY OF RESIN CEMENTS)

  • 조민우;박상혁;김종률;최경규
    • Restorative Dentistry and Endodontics
    • /
    • 제32권4호
    • /
    • pp.343-355
    • /
    • 2007
  • 4종의 레진시멘트를 통한 상아질과 간접 레진 수복물 간의 인장결합강도를 열순환 시효처리 여부에 따라 측정하여 비교하고, 주사전자현미경 관찰을 통하여 각 레진시멘트의 접착 내구성을 평가하고자 시행하였다. 48개의 건전한 제3대구치의 상아질 표면을 평탄하게 노출시키고 #320 grit Sic Paper로 연마하였다. 복합레진 블록을 제작하여 #600 grit Sic Paper로 연마한 후에 접착면을 Sandblast로 처리하였다. 각각의 레진시멘트로 제조사 지침에 따라 적용하여 복합레진 블록을 상아질 표면에 접착하였다. 이후 제작된 시편을 열순환시키지 않거나, 1,000회, 5,000회 열순환 시킨 후 ($5^{\circ}C\;-\;55^{\circ}C$) 미세인장결합강도를 측정하였다. 열순환 전 시편의 접착계면 (수직절단면)과 파절된 시편의 상아질 파단면을 전자현미경 관찰하여 다음과 같은 결론을 얻었다. 1. Variolink II의 결합강도는 다른 실험군보다 높은 결합강도를 보여주었으며, 1,000회 열순환 후 유의성 있게 결합강도가 감소되었다 (p < 0.05). 3. Multilink의 결합강도는 열순환에 가장 많은 영향을 받았으며 1,000회 열순환 이후 유의성 있게 감소되었다 (p < 0.05). 3. Panavia F 2.0과 Rely X Unicem의 결합강도는 열순환에 의하여 감소되지 않았다 (p > 0.05). 4. 접착형 레진시멘트는 복합레진형 레진시멘트에 비해서 열처리 전후 모두 낮은 결합강도를 보여주었다. 5. 결합강도가 높은 Vaviolink II와 Multilink에서는 혼합형 파괴양상을 보였고, 결합강도가 낮은 Panavia F 2.0에서는 접착성 파괴 양상을 나타내었다. 이상의 연구 결과를 토대로 적절한 전처리와 접착제를 도포한다면 복합레진형 레진시멘트는 접착형 레진시멘트보다 결합강도와 그 내구성이 우수하다고 할 수 있을 것이다. 접착성 간접 수복물의 초기 결합강도와 내구성은 레진시멘트의 접착과정과 종류, 형태에 의해 영향을 받기 때문에 이들의 적절한 선택과 올바른 사용이 성공적인 수복을 위해 중요하다.

편측 하악전달마취가 운동구어능력에 미치는 영향 (Influences of Unilateral Mandibular Block Anesthesia on Motor Speech Abilities)

  • 양승재;서인효;김미은;김기석
    • Journal of Oral Medicine and Pain
    • /
    • 제31권1호
    • /
    • pp.59-67
    • /
    • 2006
  • 발치 등 치과치료 후에 발생한 하악신경의 감각이상(이감각증)으로 인해 발음문제를 호소하는 환자들이 있지만, 감각신경의 이상과 운동구어능력 사이의 직접적인 관련성에 대해서는 논란이 존재한다. 본 연구의 목적은 편측 하악 신경의 마취로 인한 일시적인 감각손상이 운동구어능력에 미치는 영향을 평가하여 감각이상과 운동구어능력과의 관련성을 밝히고자 하였다. 본 연구는 단국대학교 치과대학에 재학중인 학생들 중 표준어를 구사하는 건강한 지원자 10명 (남:녀=7:3)을 대상으로 통법에 따라 우측 하치조신경, 설신경, 장협신경의 마취를 시행하였다. 주관적인 평가를 위해 대상자들은 마취전, 마취 후 30초, 30분, 60분, 90분, 120분, 150분, 180분에 마취 심도와 주관적으로 느끼는 발음불편감의 정도를 VAS로 기록하게 하였고, 운동 구어능력을 객관적으로 평가하기 위해 선택된 문장과 단어를 각각의 경과시간 마다 피검자에게 읽도록 하여 녹음하고 채취된 녹음샘플을 Computerized Speech $Lab^{(R)}$, Model 4500을 사용하여 발화속도, 교호운동력, 억양, 음성진전, 발음을 평가하였다. 실험 결과, 마취에 의한 주관적인 발음불편감 정도는 마취 후 60분에서 최고조에 이르고 이후 점점 감소하는데, 이는 주관적 마취 심도의 증감과 상당한 상관관계가 있었다. 주관적 마취 심도와 마취에 대한 발음불편감 정도에 따르는 다중선형회귀 분석결과, 연속발화기본 주파수에서만 통계학적으로 유의한 차이를 보였고 발화속도, 교호운동력, 음성진전 등 나머지 항목에서는 통계학적으로 유의한 차이를 보이지 않았다. 또한, 마취 전후 발음상의 변화도 관찰되지 않았다. 즉, 편측 하악 전달마취는 마취의 증감에 따라 주관적인 발음불편은 변화하지만, 객관적 항목에서 운동구어능력에는 뚜렷한 영향을 미친다고 볼 수는 없었다. 그러므로 편측 하악의 감각손상이 운동구어능력에 뚜렷한 영향을 미친다고 볼 수는 없는 것으로 사료된다.

68Ga-PSMA-11 합성 시간 단축을 위한 자동합성장치의 최적화 및 안정성 연구 (Optimization and Stabilization of Automated Synthesis Systems for Reduced 68Ga-PSMA-11 Synthesis Time)

  • 강지훈;신상민;박영시;김혜지;장화연
    • 대한임상검사과학회지
    • /
    • 제56권2호
    • /
    • pp.147-155
    • /
    • 2024
  • 68Ga-PSMA-11은 전립선특이막항원(PSMA)에 결합하는 Glu-urea-Lys 기반 리간드에 68Ga 방사성동위원소를 표지한 PET 제제로, 재발성 전립선암 및 전이의 진단과 치료를 위한 영상화에 널리 사용한다. 그러나 의료기관에서 68Ga-PSMA-11을 제조하고 품질검사 시험 결과가 나올 때까지의 시간은 평균 60분 이상 소요되어, 하루에 사용할 수 있는 68Ge/68Ga 제너레이터 용량이 제한된다. 또한 제너레이터의 1,110 MBq (30 mCi)의 명목상 활성을 제공하지만 시간이 지남에 따라 감소하고, 표지 수율이 불규칙적으로 저하된다. 이로 인해 의료기관에서는 추가 조제를 통해 동일한 용출을 유지해야 하며, 이 과정에서 작업자의 피폭 위험이 증가하고, 환자의 대기 시간이 길어지며, 제조 스케줄 조정이 불가피한 임상적 문제가 발생한다. 본 연구는 이러한 문제를 해결하기 위해 68Ga-PSMA-11의 조제 시간을 단축하고 자동합성장치를 최적화하는 것을 목표로 하였다. 자동합성장치를 이용한 합성 절차에서 68Ga과 PSMA-11 전구체의 반응 시간을 단축하고 불순물 제거 세척 단계의 횟수를 조절하여 동일한 품질을 유지하면서도 더 신속하고 경제적인 방법을 시험했다. 그 결과, 최종 합성 시간을 30분에서 20분으로 단축하였고, HEPES 함량, 잔류용매 EtOH 함량, 방사화학적 순도 등의 품질 기준을 만족시켰다. 이는 추가 조제로 인한 작업자의 피폭 문제와 환자의 대기 시간을 줄이고, 제조 스케줄 조정에도 문제가 없는 최적의 절차로 임상에서 적용할 수 있음을 시사한다.

경추부의 후관절 나사못 고정술에서 단피질삽입법과 양피질 삽입법 간의 특성에 관한 비교 (Comparisons of Unicortical and Bicortical Lateral Mass Screws in the Cervical Spine : Safety vs Strength)

  • 박춘근;황장회;지철;이재언;성재훈;최승진;이상원;;박성찬;조경석;박춘근;강준기
    • Journal of Korean Neurosurgical Society
    • /
    • 제30권10호
    • /
    • pp.1210-1219
    • /
    • 2001
  • 서 론 : 후방 경유 경추 융합을 위한 후관절 금속판 고정술은 외상성 및 퇴행성 불안정성의 치료에 효과적인 방법이다. 후관절 금속판 고정의 안정성은 여러 가지 인자에 의해 결정된다. 이중 하나가 나사못의 삽입깊이이다. 이 방법이 처음 소개될 때에는 양피질골성 삽입이 이용되었다. 외과의사의 관심은 어떻게 안전하면서 생역학적으로 강력한 고정을 얻느냐에 있다. 목 적 : 이 연구의 목적은 사체에서 단피질성과 양피질성 나사못 삽입술을 시행한 후 안전성, pull-out 강도, 방사선학적 특성을 분석하고 나사못의 삽입에 대한 교육 훈련의 수준에 따른 영향을 평가하는데 있다. 방 법 : 평균 나이 78.9세인 21구의 사체에 대하여, Magerl의 기술을 변형하여 C3-C6(n=168)까지 3.5mm AO 나사못을 양쪽 후관절에 삽입하였다. 수술중 방사선 사진영상은 사용되지 않았다. 오른 쪽(단피질성 삽입)은 14mm 나사못(11mm의 유효 길이)을 이용하고, 왼쪽은 양피질성 삽입을 시도하였다. 각 사체는 3개의 군으로 나누어 척추 수술 수련의 수준이 다른 받은 3명의 척추 외과 의사들(전임 강사, 임상 강사, 수석 레지던트)이 수술을 시행했다. 수술 후 경추를 떼어내어 나사못의 위치를 육안적으로 확인하고 방사선학적으로 안정성과 삽입 위치 (1,2,3)를 평가하였다. 척수, 후관절, 신경근과 척추 동맥에 대한 나사못의 위치를"만족할 만한","위험한", 그리고"직접적인 손상"으로 구분하였다. material testing machine을 이용하여 모든 나사못에 대해서 Pull-out 강도를 측정하였다. 결 과 : 대다수의 나사못(92.9%)은 만족할 만한 상태였다. 전예에서 척수에 대한 위험성은 없다. 오른 편(단피질성 : 14mm) 나사못의 98.9%는"만족할 만한"에 속했다. 그리고 왼쪽 편(양피질성)의 68.1%는"만족할 만한"에 속했다. 양피질성 나사못 군에서 5.8%의 척추 동맥에 대한 직접적인 손상이 있었고 신경근의 직접적인 손상 발생율은 17.4%였다. 반면에 단피질성 나사못 군에서는 이들에 대한 직접적인 손상은 없었다. 양피질성 나사못에서 보인"직접 손상"의 거의 대부분은 외과 의사의 경험 부족으로 발생하였다. 나사못의 안정성과 삽입 위치 사이에는 특별한 관련이 없었다. 모든 나사못의 pull-out 강도는 $542.0{\pm}296.6N$였다. 단피질성에 있어서의 pull-out 강도($519.0{\pm}289.9N$)와 양피질성($565.2{\pm}306N$) 나사못에는 아무런 통계학적으로 의미있는 차이점을 발견할 수 없었다(p>0.05). 나사못 삽입위치와 pull-out 강도 사이에는 의미있는 차이가 없었다. 결 론 : 이번 연구는 경추 후관절 나사못 고정술시 단피질성과 양피질성 나사못의 안정성과 효능을 집중적으로 알아보았다. 명백한 것은 14mm의 나사못(효과적인 길이는 11mm)이 보다 긴 양피질성 나사못 보다 손상의 위험이 훨씬 낮고 거의 동등한 pull-out강도를 갖는다는 것이다. 또한, 수술시 방사선 영상을 사용할 수 없을 때, 훈련과 축적된 경험에 의해 나사못 삽입의 정확성과 안전성이 향상될 수 있다.

  • PDF

착상전 유전진단을 위한 유전상담 현황과 지침개발을 위한 기초 연구 (A Study of Guidelines for Genetic Counseling in Preimplantation Genetic Diagnosis (PGD))

  • 김민지;이형송;강인수;정선용;김현주
    • Journal of Genetic Medicine
    • /
    • 제7권2호
    • /
    • pp.125-132
    • /
    • 2010
  • 목 적: 착상전 유전진단(preimplantation genetic diagnosis, PGD)은 유전질환을 가진 부부들을 대상으로 체외수정을 통해 획득한 배아에서 유전진단을 하는 방법이다. 다양한 유전질환을 가진 부부에게 그 질환에 맞는 PGD의 설계가 진행되어야 하기 때문에 PGD 시행 전유전상담을 시행하는 것은 PGD 설계에 있어서 매우 중요하다. 이에, PGD 시행 시 필요한 유전상담의 내용에 대해 환자 및 가족과 전문가의 구체적인 의견을 수렴하고 분석하고자 하였다. 대상 및 방법: 본 연구는 PGD에 있어서 유전상담의 필요성과 중요성에 대한 의견을 알아보고자, 2010년 2월 3일부터 4월 30일까지 PGD를 실시 또는 실시 예정인 부부들과 PGD 관련 전문가들을 대상으로 이메일과 직접 설문지를 배포하여 설문조사를 실시하였다. 결 과: 환자 60명과 전문가 31명을 포함하여 총 91명이 설문조사에 응답하였으며, 환자들은 염색체 이상 질환 49명(81.7%)과 단일유전자 이상 질환 11명(18.3%) 이었다. 설문에 응답한 환자와 전문가 모두 유전상담이 PGD의 의료서비스 일환으로 반드시 필요하다고 답하였다. 환자의 충분한 이해를 위하여 필요한 유전상담의 시간에 대해 환자와 가족 그리고 전문가 의견을 수렴한 결과, 각각 45명(75.0%)과 23명(74.2%)이 적정한 유전상담시간을 30분 이상이라고 응답하였다. 하지만, 현 의료시스템에서는 짧은 진료시간 내 진료와 유전상담을 동시에 진행함으로써 환자에게 완벽한 정보제공이 이루어지지 않는 것으로 나타났다. 한편, 전문가 그룹에서는 진료시간의 부족과 유전질환의 정보 부족이 유전상담의 어려운 점이라고 답하였으며, 이에 비 의사(non-MD) 전문유전상담사가 필요하다는 의견이 30명(96.7%)으로 높게 나타났다. 환자와 가족들은 PGD 시술 시 예기치 못한 결과의 가능성, 환자가 가진 유전질환의 위험을 예방할 수 있는 선택사항, 환자가 가지고 있는 유전질환의 위험도 평가, 유전자 검사 시 검사의 목적 설명 및 검사기술의 한계점과 오진률의 설명, PGD 시술 전반에 관한 기술적인 정보 등에 대하여 관심을 가지고 있으며 더 자세한 설명을 필요로 하는 것으로 나타났다. 이에 대한 전문가 의견 역시 환자 및 가족이 관심 있고 자세한 설명을 원하는 정보와 대부분 일치하였다. 이에 따라 환자의 요구와 의견으로 나타난 위의 결과들을 향후 PGD를 위한 유전상담의 지침(guide-line) 구축 시 반영하여야 할 것으로 사료된다. 결 론: 본 연구에서 유전진단과 생식의학 기술의 발전과 더불어 PGD의 적용과 효율성 등에 대한인식이 높아짐에 따라, PGD를 시행함에 있어서 구체적이고 체계적인 유전상담이 필요하다는 것을 확인할 수 있었다. 본 연구의 설문조사 결과가 향후 PGD를 위한 유전상담 지침서(guideline)에 반영되어 적절한 PGD의 설계, 실시, 사후관리에 큰 도움이 되기를 기대한다.

Perceptional Change of a New Product, DMB Phone

  • Kim, Ju-Young;Ko, Deok-Im
    • 마케팅과학연구
    • /
    • 제18권3호
    • /
    • pp.59-88
    • /
    • 2008
  • Digital Convergence means integration between industry, technology, and contents, and in marketing, it usually comes with creation of new types of product and service under the base of digital technology as digitalization progress in electro-communication industries including telecommunication, home appliance, and computer industries. One can see digital convergence not only in instruments such as PC, AV appliances, cellular phone, but also in contents, network, service that are required in production, modification, distribution, re-production of information. Convergence in contents started around 1990. Convergence in network and service begins as broadcasting and telecommunication integrates and DMB(digital multimedia broadcasting), born in May, 2005 is the symbolic icon in this trend. There are some positive and negative expectations about DMB. The reason why two opposite expectations exist is that DMB does not come out from customer's need but from technology development. Therefore, customers might have hard time to interpret the real meaning of DMB. Time is quite critical to a high tech product, like DMB because another product with same function from different technology can replace the existing product within short period of time. If DMB does not positioning well to customer's mind quickly, another products like Wibro, IPTV, or HSPDA could replace it before it even spreads out. Therefore, positioning strategy is critical for success of DMB product. To make correct positioning strategy, one needs to understand how consumer interprets DMB and how consumer's interpretation can be changed via communication strategy. In this study, we try to investigate how consumer perceives a new product, like DMB and how AD strategy change consumer's perception. More specifically, the paper segment consumers into sub-groups based on their DMB perceptions and compare their characteristics in order to understand how they perceive DMB. And, expose them different printed ADs that have messages guiding consumer think DMB in specific ways, either cellular phone or personal TV. Research Question 1: Segment consumers according to perceptions about DMB and compare characteristics of segmentations. Research Question 2: Compare perceptions about DMB after AD that induces categorization of DMB in direction for each segment. If one understand and predict a direction in which consumer perceive a new product, firm can select target customers easily. We segment consumers according to their perception and analyze characteristics in order to find some variables that can influence perceptions, like prior experience, usage, or habit. And then, marketing people can use this variables to identify target customers and predict their perceptions. If one knows how customer's perception is changed via AD message, communication strategy could be constructed properly. Specially, information from segmented customers helps to develop efficient AD strategy for segment who has prior perception. Research framework consists of two measurements and one treatment, O1 X O2. First observation is for collecting information about consumer's perception and their characteristics. Based on first observation, the paper segment consumers into two groups, one group perceives DMB similar to Cellular phone and the other group perceives DMB similar to TV. And compare characteristics of two segments in order to find reason why they perceive DMB differently. Next, we expose two kinds of AD to subjects. One AD describes DMB as Cellular phone and the other Ad describes DMB as personal TV. When two ADs are exposed to subjects, consumers don't know their prior perception of DMB, in other words, which subject belongs 'similar-to-Cellular phone' segment or 'similar-to-TV' segment? However, we analyze the AD's effect differently for each segment. In research design, final observation is for investigating AD effect. Perception before AD is compared with perception after AD. Comparisons are made for each segment and for each AD. For the segment who perceives DMB similar to TV, AD that describes DMB as cellular phone could change the prior perception. And AD that describes DMB as personal TV, could enforce the prior perception. For data collection, subjects are selected from undergraduate students because they have basic knowledge about most digital equipments and have open attitude about a new product and media. Total number of subjects is 240. In order to measure perception about DMB, we use indirect measurement, comparison with other similar digital products. To select similar digital products, we pre-survey students and then finally select PDA, Car-TV, Cellular Phone, MP3 player, TV, and PSP. Quasi experiment is done at several classes under instructor's allowance. After brief introduction, prior knowledge, awareness, and usage about DMB as well as other digital instruments is asked and their similarities and perceived characteristics are measured. And then, two kinds of manipulated color-printed AD are distributed and similarities and perceived characteristics for DMB are re-measured. Finally purchase intension, AD attitude, manipulation check, and demographic variables are asked. Subjects are given small gift for participation. Stimuli are color-printed advertising. Their actual size is A4 and made after several pre-test from AD professionals and students. As results, consumers are segmented into two subgroups based on their perceptions of DMB. Similarity measure between DMB and cellular phone and similarity measure between DMB and TV are used to classify consumers. If subject whose first measure is less than the second measure, she is classified into segment A and segment A is characterized as they perceive DMB like TV. Otherwise, they are classified as segment B, who perceives DMB like cellular phone. Discriminant analysis on these groups with their characteristics of usage and attitude shows that Segment A knows much about DMB and uses a lot of digital instrument. Segment B, who thinks DMB as cellular phone doesn't know well about DMB and not familiar with other digital instruments. So, consumers with higher knowledge perceive DMB similar to TV because launching DMB advertising lead consumer think DMB as TV. Consumers with less interest on digital products don't know well about DMB AD and then think DMB as cellular phone. In order to investigate perceptions of DMB as well as other digital instruments, we apply Proxscal analysis, Multidimensional Scaling technique at SPSS statistical package. At first step, subjects are presented 21 pairs of 7 digital instruments and evaluate similarity judgments on 7 point scale. And for each segment, their similarity judgments are averaged and similarity matrix is made. Secondly, Proxscal analysis of segment A and B are done. At third stage, get similarity judgment between DMB and other digital instruments after AD exposure. Lastly, similarity judgments of group A-1, A-2, B-1, and B-2 are named as 'after DMB' and put them into matrix made at the first stage. Then apply Proxscal analysis on these matrixes and check the positional difference of DMB and after DMB. The results show that map of segment A, who perceives DMB similar as TV, shows that DMB position closer to TV than to Cellular phone as expected. Map of segment B, who perceive DMB similar as cellular phone shows that DMB position closer to Cellular phone than to TV as expected. Stress value and R-square is acceptable. And, change results after stimuli, manipulated Advertising show that AD makes DMB perception bent toward Cellular phone when Cellular phone-like AD is exposed, and that DMB positioning move towards Car-TV which is more personalized one when TV-like AD is exposed. It is true for both segment, A and B, consistently. Furthermore, the paper apply correspondence analysis to the same data and find almost the same results. The paper answers two main research questions. The first one is that perception about a new product is made mainly from prior experience. And the second one is that AD is effective in changing and enforcing perception. In addition to above, we extend perception change to purchase intention. Purchase intention is high when AD enforces original perception. AD that shows DMB like TV makes worst intention. This paper has limitations and issues to be pursed in near future. Methodologically, current methodology can't provide statistical test on the perceptual change, since classical MDS models, like Proxscal and correspondence analysis are not probability models. So, a new probability MDS model for testing hypothesis about configuration needs to be developed. Next, advertising message needs to be developed more rigorously from theoretical and managerial perspective. Also experimental procedure could be improved for more realistic data collection. For example, web-based experiment and real product stimuli and multimedia presentation could be employed. Or, one can display products together in simulated shop. In addition, demand and social desirability threats of internal validity could influence on the results. In order to handle the threats, results of the model-intended advertising and other "pseudo" advertising could be compared. Furthermore, one can try various level of innovativeness in order to check whether it make any different results (cf. Moon 2006). In addition, if one can create hypothetical product that is really innovative and new for research, it helps to make a vacant impression status and then to study how to form impression in more rigorous way.

  • PDF