• Journal of Korean Public Health Nursing
• /
• v.31 no.2
• /
• pp.296-310
• /
• 2017

Purpose: The aim of this study was to develop and test the validity and reliability of the Korean version of the Pre-Menstrual Coping Measure (PMCM-K). Methods: Translation of the PMCM-K was validated using forward-backward translation methods. The study was conducted as a cross-sectional survey from March 7 to April 30, 2016 and the data from a total of 362 young adult women were used for the final analysis. The content validity, construct validity and criterion-related validity were evaluated. The internal consistency was calculated to assess the reliability. Results: The PMCM-K consisted of five factors: premenstrual coping regarding avoiding harm, awareness and acceptance of premenstrual change, self-care, communicating, and adjusting energy, which all explained 62.0% of the total variance in PMCM-K. The total score of the PMCM-K showed a positive correlation with the shortened premenstrual assessment form (r=.50). The Cronbach's alpha reliability coefficient was .94 for the overall instrument and .77-.93 for five factors. Conclusion: PMCM-K provides a valid and reliable scale for quantifying the ways of coping specific to a negative premenstrual change for Korean young adult women. The PMCM-K will play an important role as a way to gain a sense of agency in coping with premenstrual changes.

• The Journal of the Korea Contents Association
• /
• v.16 no.5
• /
• pp.229-241
• /
• 2016

This research has its purpose to seek, among the CEOs of social enterprises, the influence of job stress on business performance, social support inbetween them, and adjusting role of government-supported policies. CEO of social enterprise, which is established to realize its social purposes, receives the job stress due to business ethics, profitability, identity crisis, management challenges and etc. We would like to set the foundation for the enterprises to constantly conduct social purposes within the local society by raising the business performances of social enterprises through seeking the measures to resolve such job stresses of the CEOs by expressing them. This research applied the ISR Job Stress Model theroy as its main ground of theoretical background. We would like to analyze the inter-significance by setting the job stress causes and job stress influences as independent variables, business achievements as a dependent variable, and social support, government-supported policies as moderating variables. For the methods of the research, we collected, using structuralized questionnaire, from 223 social enterprise CEOs located within Korea. Data analysis used IBM SPSS Statristics 20.0 programme, and through general characteristic of sample, confidence testing, factorial analysis, correlation analysis and research hypothesis testing, drew the following results. First, job stress factor and influence were analyzed to have negative impacts on business performance. Second, social support was found to lower job stress factor and influence, and raise business performance. Third, government-supported policy was analyzed to lower job stress factor and influence, and raise business performance.

• Journal of Preventive Medicine and Public Health
• /
• v.55 no.4
• /
• pp.407-413
• /
• 2022

Objectives: This study provides insights on the impact of a targeted intervention (TI) programme on behaviour change among injecting drug users (IDUs) in India. Methods: This paper examined the data from the Integrated Biological and Behavioural Surveillance 2014-2015 for IDUs in India. Logistic regression was performed to understand the factors (TI programme services) that affected injecting risk behaviours by adjusting for covariates. Propensity score matching was conducted to understand the impact of the TI programme on using new needles/syringes and sharing needles/syringes in the most recent injecting episode by accounting for the covariates that predicted receiving the intervention. Results: Participants who received new needles and syringes from peer educators or outreach workers were 1.3 times (adjusted odds ratio, 1.29; 95% confidence interval [CI], 1.09 to 1.53) more likely to use new needles/syringes during most recent injecting episode than participants who did not receive needles/syringes. The matched-samples estimate (i.e., average treatment effect on treated) of using new needles in the most recent injecting episode showed a 2.8% (95% CI, 0.0 to 5.6) increase in the use of new needles and a 6.5% (95% CI, -9.7 to -3.3) decrease in needle sharing in the most recent injecting episode in participants who received new needles/syringes. There was a 2.2% (95% CI, -3.8 to -0.6) decrease in needle sharing in the most recent injecting episode among participants who were referred to other services (integrated counselling and testing centre, detox centres, etc.). Conclusions: The TI programme proved to be effective for behaviour change among IDUs, as substantiated by the use of new needles/syringes and sharing of needles/syringes.

• Korean Journal of Biological Psychiatry
• /
• v.22 no.4
• /
• pp.173-178
• /
• 2015

Objectives Previous genome-wide association studies have indicated the association between ankyrin 3 (ANK3) and the vulnerability of schizophrenia. We investigated the association between single nucleotide polymorphisms (SNPs) covering the whole ANK3 locus and schizophrenia in the Korean population. Methods The study subjects were 582 patients with schizophrenia and 502 healthy controls. Thirty-eight tag SNPs on ANK3 and five additional SNPs showing significant association with schizophrenia in previous studies were genotyped. Results Three (rs10994181, rs16914791, rs1938526) of 43 SNPs showed a nominally significant association (p < 0.05) with at least one genotype model. But none of these associations remained significant after adjusting for multiple testing errors with Bonferroni's correction. Conclusions We could not identify a significant association between ANK3 and schizophrenia in the Korean population. However, three SNPs showing an association signal with nominal significance need to be investigated in future studies with higher statistical power and more specific phenotype crossing the current diagnostic categories.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.4
• /
• pp.115-119
• /
• 2008

Purpose: To compare the tentative and final addition, a combination chart of cross-grid and red green with the final addition prescribed in presbyopia were used in this study. Methods: The study subjects were 60 persons with presbyopia who were 41 to 60 years (mean: 51.7 years). Tentative addition were determined using red green chart (RG), cross-grid chart (CG) and the combination chart (red green cross-grid chart, RGCG) of the above two. And the final addition for a 40 cm working distance was determined for each subject by adjusting the tentative addition. Results: It was found that there were statistically significant differences of the final addition and the tentative addition between the each different test method. This result indicated that using the red-green cross-grid chart is the higher repeatability. Conclusions: This study shows that red green cross-grid chart (RGCG) seems to be get proper data for determining addition in presbyopes, and this method would be helpful in the diagnostic evaluation of addition in binocular vision testing.

• The Journal of Internal Korean Medicine
• /
• v.44 no.5
• /
• pp.823-829
• /
• 2023

Objectives: This study reports the case of a patient with right hemiparesis after a left thalamic infarction, in which the patient experienced improved clinical symptoms (hemiparesis, constipation) after treatment with a complex Korean medicine treatment. Methods: A 81-year-old male patient diagnosed with acute left thalamic infarction was treated with daily acupuncture and herbal medicine (Boyanghwanoh-tang-gagam) three times a day. Jowiseunggi-tang extract granules were administered to treat constipation by adjusting the dosage according to the reported symptoms. The patient's clinical course was assessed using changes in Modified Barthel Index (MBI) score, Manual Muscle Testing (MMT) grade, and defecation frequency . Results: The patient's MBI score improved from 35 to 69 and was discharged with the ability to walk under supervision. The MMT grade also improved from 3/4 to 5/5 in the upper/lower extremities. Other clinical symptoms, including constipation, also improved, leading to the discontinuation of magnesium medication. Conclusion: These findings suggest that complex Korean medicine treatments, including herbal medicine and acupuncture, may be an effective treatment for post-stroke hemiplegic patients.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.4
• /
• pp.168-180
• /
• 2000

In the Part I, the three dimensional model testing with NNW deep water wave direction gave the results such that the occurrence of breaking waves over the peak of Ear-Do caused very small wave height at the structure position. But the measured wave forces were rather greater than the calculated forces based on deep water wave height. Furthermore, It was also perceived that the time series of the forces looked like corresponding to the case that waves were superimposed by an unidirectional current. In the present Part II, the current is presumed to be a flow secondly induced by breaking waves, and an extensive study to clarify the current in a quantitative sense is performed through numerical analysis and hydraulic experiment. The results showed that a strong circulation can surely occur in the vicinity of the structure due to radiation stress differentials given by the breaking waves. It was also recognized that the velocity of the induced current varied with the magnitude of energy dissipation rate introduced in the numerical analysis. The numerical analysis was tuned adjusting the dissipation rate so that the calculated wave field could closely match with the experimental results of Part I. The fluid force (in prototype) for the optimal match showed approximately 2.2% increased over the calculated value based on the deep water wave height (24.6m) whereas the force corresponding to the average of the experimental values showed the increase of about 13.0%.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.10
• /
• pp.67-79
• /
• 2016

Waveform micropile is an advanced construction method that combined the concept of conventional micropile with jet grouting method. This new form of micropile was developed to improve frictional resistance, which consequently leads to achieving higher bearing capacity and cost efficiency. Two field tests were conducted to examine the field applicability as well as to verify the effects of bearing capacity enhancement. In particular, waveform micropile construction using jet grouting method was performed to evaluate the viability of waveform micropile installation. After testing, the surrounding ground was excavated to check the accomplishment on the shape of waveform micropile. The result showed that waveform micropile can be installed by adjusting the grouting time and pressure. In the loading tests, waveform micropile's bearing capacity increased by 1.4 to 2.3 times depending on their shapes when compared with conventional micropile. Overall results clearly demonstrated that waveform micropile is an enhanced construction method that can improve bearing capacity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4121-4128
• /
• 2010

A probe card is used in testing semiconductor wafers. It must maintain a precise location tolerance for a fine pitch due to highly densified chips. However, high heat transferred from its lower chuck causes thermal deformations of the probe card. Vertical deformation due to the heat will bring contact problems to the pins in the probe card, while horizontal deformation will cause positional inaccuracies. Therefore, probe cards must be designed with proper materials and structures so that the thermal deformations are within allowable tolerances. In this paper, heat transfer analyses under realistic loading conditions are simulated using ANSYS$^{TM}$ finite element analysis program. Thermal deformations are calculated based on steady-state temperature gradients, and an optimal structure of the probe card is proposed by adjusting a set of relevant design parameters so that the deformations are minimized.

• Restorative Dentistry and Endodontics
• /
• v.33 no.5
• /
• pp.428-434
• /
• 2008

The purpose of this study was to compare the microtensile bond strength in Class I cavities associated with different light curing modes of same light energy density. Occlusal enamel was removed to expose a flat dentin surface and twenty box-shaped Class I cavities were prepared in dentin. Single Bond (3M Dental product) was applied and Z 250 was inserted using bulk technique. The composite was light-cured using one of four techniques, pulse delay (PD group), soft-start (SS group), pulse cure (PC group) and standard continuous cure (CC group). The light-curing unit capable of adjusting time and intensity (VIP, Bisco Dental product) was selected and the light energy density for all curing modes was fixed at $16J/cm^2$. After storage for 24 hours, specimens were sectioned into beams with a rectangular cross-sectional area of approximately $1mm^2$ Microtensile bond strength $({\mu}TBS)$ test was per- formed using a univel·sal testing machine (EZ Test, Shimadzu Co.). The results were analyzed using oneway ANOVA and Tukey's test at significance level 0.05. The ${\mu}TBS$ of PD group and SS group was higher than that of PC group and CC group. Within the limitations of this in vitro study, modification of curing modes such as pulse delay and soft start polymerization can improve resin/dentin bond strength in Class I cavities by controlling polymerization velocity of composite resin.