1 |
Han, J. T., Kim, S. R., Jang, Y. E., and Lee, S. H. (2013), "Evaluation of Bearing Capacity of Waveform Micropile by Numerical Analyses", Journal of the Korea Academia-Industrial cooperation Society, Vol.14, No.11, pp.5906-5914 (in Korean).
DOI
|
2 |
Huang, Y., Hajduk, E. L., Lipka, D. S., and Adams, J. C. (2007), "Micropile Load Testing and Installation Monitoring at the CATS Vehicle Maintenance Facility", Contemporary Issues In Deep Foundations, ASCE, pp.1-10.
|
3 |
Janbu, N. (1976), Static bearing capacity of friction piles, In Sechste Europaeische Konferenz Fuer Bodenmechanik Und Grundbau, Vol.1.
|
4 |
Jang, Y.E. and Han, J.T. (2015), "Study of Load Capacity of Waveform Micropile by Centrifuge Test", Proc. of the 25th International Offshore and Polar Engineering Conference. International Society of Offshore and Polar Engineers, pp.700-706.
|
5 |
Jeon, S. S. (2004), "Interpretation of Load Tests on Minipiles", Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, Vol. 157, No. 2, pp. 85-90.
DOI
|
6 |
Jung, S. J., Lee, S. I., Jeon, J. W., and Kim, M. M. (2009), "Prediction of Ultimate Load of Drilled Shafts Embedded in Weathered Rock by Extrapolation Method" Journal of The Korean Society of Civil Engineers, Vol.29, No.4C, pp.145-151.
|
7 |
Juran, I., Benslimane, A., and Hanna, S. (2001), Engineering analysis of dynamic behavior of micropile systems, Transportation Research Record, Vol.1772, pp.91-106.
DOI
|
8 |
KSF-2445. (2012), Standard Method of Testing Piles Under Axial Compressiove Load, Korean Agency for Technology and Standards, Seoul, Korea.
|
9 |
Martin, R. E. and DeStephen, R. A. (1983), "Large Diameter Double Underreamed Drilled Shafts", Journal of Geotechnical Engineering, Vol.109, No.8, pp.1082-1098.
DOI
|
10 |
Meyerhof, G. G. (1976), "Bearing Capacity of Settlement of Pile Foundations", Journal of Geotechnical and Geoenvironmental Engineering, Vol.102 (ASCE 1962), pp.195-228.
|
11 |
Misra, A. and Chen, C.H. (2004), "Analytical Slution for Micropile Design under Tension and Compression", Geotechnical & Geological Engineering, Vol.22, No.2, pp.199-225.
DOI
|
12 |
Paikowsky, S. G. and Tolosko, T. A. (1999), Extrapolation of pile capacity from non-failed load tests, Federal Highway Administration, Report No. FHWA-RD-99-170, Washington, D. C.
|
13 |
Qian, Y., Wang, J., and Wang, R. (2015), "The Analysis of the Vertical Uplift Bearing Capacity of Single CEP Pile", Open Civil Engineering Journal, Vol.9, pp.598-601.
DOI
|
14 |
Sabatini P. J., Pass, D. G., and Bachus, R. C. (1999), Geotechnical engineering circular no.4 ground anchors and anchored system, No. FHWA-SA-99-015.
|
15 |
Sadek, M. and Isam, S. (2004), "Three-dimensional Finite Element Analysis of the Seismic behavior of Inclined Micropiles", Soil Dynamics and Earthquake Engineering, Vol.24, No.6, pp.473-485.
DOI
|
16 |
Seo, H., Prezzi, M., and Salgado, R. (2013), "Instrumented Static Load Test on Rock-socketed Micropile", Journal of Geotechnical and Geoenvironmental Engineering, Vol.139, No.12, pp.2037-2047.
DOI
|
17 |
Tsukada, K., Miura, Y., Tsubokawa, Y., and Otani, G.L. (2006), "Mechanism of Bearing Capacity of Spread Footings Reinforced with Micropiles", Soils and Foundations, Vol.46, No.3, pp.367-376.
DOI
|
18 |
Valentino, R. and Stevanoni, D. (2010), "Micropiles Made of Reinforced Polyurethane Resins: Load Tests and Evaluation of the Bearing Capacity", Electronic Journal of Geotechnical Engineering, Vol.15, pp.895-912.
|
19 |
You, G. L., Miura, K., and Ishito, M. (2003), "Behavior of Micropile Foundation under Inclined Loads in Laboratory Tests", Journal of Lowland Technology International, Vol.5, No.2, pp. 16-26.
|
20 |
Vesic, A. S. (1977), Design of Pile Foundations, National Cooperative Highway Research Program Synthesis of Practice No. 42, Transportation Research Board, Washington, DC (1977): pp.32-48.
|
21 |
Zhang, Q. Q. and Zhang, Z. M. (2012), "Simplified Calculation Approach for Settlement of Single Pile and Pile Groups", Journal of Computing in Civil Engineering, Vol.26, No.6, pp.750-758.
DOI
|
22 |
Bell, A. L. (1993), Jet grouting-Ground Improvement, Ed. Moseley, E.D., Chapman & Hall, Glasgow, pp.149-174.
|
23 |
ASTM D 1143-81. (2007), Standard test method for piles deep foundations under static axial compressive load, Annual book of ASTM Standards.
|
24 |
Abd Elaziz, A. Y. and El Naggar, M. H. (2014), "Geotechnical Capacity of Hollow-bar Micropiles in Cohesive Soils", Canadian Geotechnical Journal, Vol.51, No.10, pp.1123-1138.
DOI
|
25 |
Akbas, S. O. and Kulhawy, F. H. (2009), "Axial Compression of Footings in Cohesionless Soils. I: Load-settlement behavior", Journal of Geotechnical and Geoenvironmental Engineering, Vol.135, No.11, pp.1562-1574.
DOI
|
26 |
Cai, L., Li, Y., and Zhou, H. (2006), "Discussion on the Bearing Capacity of a Bored Pile with Reamed Enlargements", Foundation Analysis and Design: Innovative Methods, pp.137-144, ASCE.
|
27 |
Castelli, F. and Maugeri, M. (2002), "Simplified Nonlinear Analysis for Settlement Prediction of Pile Groups", Journal of Geotechnical and Geoenvironmental Engineering, Vol.128, No.1, pp.76-84.
DOI
|
28 |
Covil, C. S. and Skinner, A. E. (1994), "Jet Grouting - A Review of Some of the Operating Parameters that from the Basis of the Jet Grouting Process", Proc. of Grouting in the Ground, Ed. Bell, A. A., Thomas Telford, London, UK, pp.605-629.
|
29 |
Coyle, H. M. and Castello, R. R. (1981), "New Design Correlations for Piles in Sand", Journal of the Geotechnical and Geoenvironmental Engineering, Vol.107 (ASCE 16379).
|
30 |
FHWA. (2005), Micropile Design and Construction: Reference Manual, FHWA-NHI-05-039, Federal Highway Administration, Vol.1, No.1, pp.7-28.
|
31 |
Han, J. and Ye, S. L. (2006), "A Field Study on the behavior of Micropiles in Clay under Compression or Tension", Canadian Geotechnical Journal, Vol.43, No.1, pp.19-29.
DOI
|
32 |
Gomez, J., Cadden, A., and Bruce, D.A. (2003), "Micropiles Founded in Rock: Development and Evolution of Bond Stresses under Repeated Loading", Proc. of the 12th Pan-American Conferemce on Soil Mechanics and Geotechnical Engineering, Germany, pp. 1911-1916.
|